A potential security vulnerability has been identified in certain HP PC products using AMI BIOS, which might allow arbitrary code execution. AMI has released firmware updates to mitigate this vulnerability.

Possible buffer overflow while playing mkv clip due to lack of validation of atom size buffer in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCS605, QM215, Rennell, SA6155P, Saipan, SDA660, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

A vulnerability classified as critical was found in Totolink X2000R_V2 2.0.0-B20230727.10434. This vulnerability affects the function formTmultiAP of the file /bin/boa. The manipulation leads to buffer overflow. VDB-249742 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Possible buffer overflow while handling NAN reception of NMF in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in IPQ6018, IPQ8074, Nicobar, QCA6390, QCA8081, QCN7605, QCS404, QCS405, Rennell, SC7180, SC8180X, SM6150, SM7150, SM8150, SXR2130

A stack overflow in FAST FW300R v1.3.13 Build 141023 Rel.61347n allows attackers to execute arbitrary code or cause a Denial of Service (DoS) via a crafted file path.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the Authentication Cookie of the web application that would allow an attacker to execute arbitrary code on the device.

A vulnerability has been identified in SICAM MMU (All versions < V2.05), SICAM SGU (All versions), SICAM T (All versions < V2.18). A buffer overflow in various positions of the web application might enable an attacker with access to the web application to execute arbitrary code over the network.

A vulnerability in /goform/SetStaticRouteCfg in the sub_519F4 function in Tenda AX1806 1.0.0.1 firmware leads to stack-based buffer overflow.

Possible buffer overflow in WLAN Parser due to lack of length check when copying data in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8096, APQ8096AU, APQ8098, IPQ6018, IPQ8074, MDM9607, MDM9640, MDM9650, MSM8996AU, MSM8998, Nicobar, QCA6174A, QCA6574, QCA6574AU, QCA6584, QCA6584AU, QCA8081, QCA9377, QCA9379, QCN7605, QCS405, QCS605, Rennell, SA6155P, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the URI paths of the web application that would allow an unauthenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.

Buffer overflow in the prepare_reply function in request.c for Mathopd 1.2 through 1.5b13, and possibly earlier versions, allows remote attackers to cause a denial of service (server crash) and possibly execute arbitrary code via an HTTP request with a long path.

Buffer overflows while decoding setup message from Network due to lack of check of IE message length received from network in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, Kamorta, MDM9150, MDM9205, MDM9206, MDM9207C, MDM9607, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SA415M, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SM6150, SM7150, SM8150, SXR1130

Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the mitInterface parameter in ip/goform/RouteStatic

Buffer Overflow in coap_msg.c in FreeCoAP allows remote attackers to execute arbitrary code or cause a denial of service (stack buffer overflow) via a crafted packet.

Buffer overflow occur while playing the clip which is nonstandard due to lack of check of size duration in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996, MSM8996AU, Nicobar, QCS605, QM215, Rennell, SA6155P, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR2130

PingCAP TiDB v8.1.0 was discovered to contain a buffer overflow via the component expression.ExplainExpressionList. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. NOTE: PingCAP maintains that the actual reproduction of this issue did not cause the security impact of service interruption to other users. They argue that this is a complex query bug and not a DoS vulnerability.

Possible buffer overflow while processing clientlog and serverlog due to lack of validation of data received in logs in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Mobile in APQ8096AU, QCS605, SDM439, SM8150, SXR1130

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the request parser of the IPP service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) and potentially execute arbitrary code on the device.

Multiple buffer overflows in abcm2ps before 5.9.12 might allow remote attackers to execute arbitrary code via (1) a crafted input file, related to the PUT0 and PUT1 output macros; (2) a crafted input file, related to the trim_title function; and possibly (3) a long -O option on a command line.

While parsing invalid super index table, elements within super index table may exceed total chunk size and invalid data is read into the table in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996, MSM8996AU, Nicobar, QCM2150, QCS405, QCS605, QM215, Rennell, SA6155P, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

A vulnerability was found in Totolink T6 4.1.9cu.5241_B20210923. It has been classified as critical. This affects the function main of the file /cgi-bin/cstecgi.cgi?action=login of the component HTTP POST Request Handler. The manipulation of the argument v41 leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249855. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the attributes parser of the IPP service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) and potentially execute arbitrary code on the device.

An issue was discovered in the ROS communications-related packages (aka ros_comm or ros-melodic-ros-comm) through 1.14.3. A buffer overflow allows attackers to cause a denial of service and possibly execute arbitrary code via an IP address with a long hostname.

Buffer overflow can occur while parsing RSN IE containing list of PMK ID`s which are more than the buffer size in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096, APQ8096AU, APQ8098, IPQ6018, IPQ8074, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8996, MSM8996AU, MSM8998, Nicobar, QCA4531, QCA6174A, QCA6564, QCA6574, QCA6574AU, QCA6584, QCA6584AU, QCA8081, QCA9377, QCA9379, QCA9886, QCN7605, QCS405, QCS605, SA6155P, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

Buffer overflow occurs while processing LMP packet in which name length parameter exceeds value specified in BT-specification in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8016, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, Nicobar, QCA6174A, QCA6390, QCA6574AU, QCA9377, QCA9379, QCA9886, QCM2150, QCN7605, QCS404, QCS405, QCS605, QM215, Rennell, SA6155P, Saipan, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the LPD service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) in the LPD service and potentially execute arbitrary code on the device.

open5gs v2.6.4 is vulnerable to Buffer Overflow. via /lib/core/abts.c.

Wind River VxWorks 6.7 though 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 3 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion during connect() to a remote host.

Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 2 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion caused by a malformed TCP AO option.

The ACENet service in Sierra Wireless ALEOS before 4.4.9, 4.5.x through 4.9.x before 4.9.5, and 4.10.x through 4.13.x before 4.14.0 allows remote attackers to execute arbitrary code via a buffer overflow.

Anviz CrossChex access control management software 4.3.8.0 and 4.3.12 is vulnerable to a buffer overflow vulnerability.

Multiple buffer overflows in the RLE decoder in the rgbimg module in Python 2.5 allow remote attackers to have an unspecified impact via an image file containing crafted data that triggers improper processing within the (1) longimagedata or (2) expandrow function.

Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the IPv4 component. There is an IPNET security vulnerability: Stack overflow in the parsing of IPv4 packets’ IP options.

Wind River VxWorks has a Buffer Overflow in the TCP component (issue 1 of 4). This is a IPNET security vulnerability: TCP Urgent Pointer = 0 that leads to an integer underflow.

Lack of length check of response buffer can lead to buffer over-flow while GP command response buffer handling in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8017, APQ8053, APQ8098, MDM9206, MDM9607, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8998, QM215, SDA660, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660

PJSIP is a free and open source multimedia communication library written in C. In 2.16 and earlier, a buffer overflow vulnerability exists in PJNATH ICE Session when processing credentials with excessively long usernames.

Buffer overflow can occur when processing non standard SDP video Image attribute parameter in a VILTE\VOLTE call in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9206, MDM9607, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130

Filling media attribute tag names without validating the destination buffer size which can result in the buffer overflow in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130

A buffer overflow vulnerability exists in the confsrv ucloud_set_node_location functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted network packet can lead to a buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.

Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble version was discovered to contain a heap overflow in the nav2_amcl process. This vulnerability is triggered via sending a crafted message to the component /initialpose.

The Delta Electronics DVW-W02W2-E2 devices expose a web administration interface to users. This interface implements multiple features that are affected by command injections and stack overflows vulnerabilities. Successful exploitation of these flaws would allow remote unauthenticated attackers to gain remote code execution with elevated privileges on the affected devices. This issue affects DVW-W02W2-E2 through version 2.5.2.

In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution.