An Untrusted Search Path vulnerability in Malwarebytes AdwCleaner 8.0.3 could cause arbitrary code execution with SYSTEM privileges when a malicious DLL library is loaded.

An issue was discovered in Malwarebytes before 4.0 on macOS. A malicious application was able to perform a privileged action within the Malwarebytes launch daemon. The privileged service improperly validated XPC connections by relying on the PID instead of the audit token. An attacker can construct a situation where the same PID is used for running two different programs at different times, by leveraging a race condition during crafted use of posix_spawn.

OpenClaw before 2026.5.27 contains an arbitrary code execution vulnerability in skill install flows where workspace .env files can override the Homebrew executable selection. Attackers with access to trusted operator workspaces can execute unintended Homebrew-compatible executables during skill setup to compromise the system.

Untrusted LD_LIBRARY_PATH environment variable vulnerability in the GNU C Library version 2.27 to 2.38 allows attacker controlled loading of dynamically shared library in statically compiled setuid binaries that call dlopen (including internal dlopen calls after setlocale or calls to NSS functions such as getaddrinfo).

Multiple untrusted search path vulnerabilities in Putty beta 0.67 allow local users to execute arbitrary code and conduct DLL hijacking attacks via a Trojan horse (1) UxTheme.dll or (2) ntmarta.dll file in the current working directory.

A vulnerability, which was classified as critical, has been found in Discord 1.0.9188 on Windows. Affected by this issue is some unknown functionality in the library WINSTA.dll. The manipulation leads to uncontrolled search path. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An untrusted search path vulnerability was found in Yarn. When a victim runs certain Yarn commands in a directory with attacker-controlled content, malicious commands could be executed in unexpected ways.

A code-execution vulnerability exists during startup in jhi.dll and otpiha.dll in Symantec VIP Access Desktop before 2.2.2, which could let local malicious users execute arbitrary code.

SumatraPDF is a multi-format reader for Windows. In 3.5.2 and earlier, the PDF reader allows execution of a malicious binary (explorer.exe) located in the same directory as the opened PDF when the user clicks File → “Show in folder”. This behavior leads to arbitrary code execution on the victim’s system with the privileges of the current user, without any warning or user interaction beyond the menu click.

Untrusted search path vulnerability in the HGFS (aka Shared Folders) feature in VMware Tools 10.0.5 in VMware ESXi 5.0 through 6.0, VMware Workstation Pro 12.1.x before 12.1.1, VMware Workstation Player 12.1.x before 12.1.1, and VMware Fusion 8.1.x before 8.1.1 allows local users to gain privileges via a Trojan horse DLL in the current working directory.

Untrusted search path vulnerability in the PySys_SetArgv API function in Python 2.6 and earlier, and possibly later versions, prepends an empty string to sys.path when the argv[0] argument does not contain a path separator, which might allow local users to execute arbitrary code via a Trojan horse Python file in the current working directory.

In Edge Client version 7.2.x before 7.2.1.1, 7.1.9.x before 7.1.9.8, and 7.1.x-7.1.8.x before 7.1.8.5, an untrusted search path vulnerability in the BIG-IP APM Client Troubleshooting Utility (CTU) for Windows could allow an attacker to load a malicious DLL library from its current directory. User interaction is required to exploit this vulnerability in that the victim must run this utility on the Windows system. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

DLL Search Order Hijacking vulnerability in Microsoft Windows Client in McAfee True Key (TK) before 5.1.165 allows local users to execute arbitrary code via specially crafted malware.

DLL Side-Loading vulnerability in Microsoft Windows Client in McAfee True Key before 4.20.110 allows local users to gain privilege elevation via not verifying a particular DLL file signature.

An issue was discovered in Foxit PhantomPDF before 8.3.6. It has an untrusted search path that allows a DLL to execute remote code.

Opera before 57.0.3098.106 is vulnerable to a DLL Search Order hijacking attack where an attacker can send a ZIP archive composed of an HTML page along with a malicious DLL to the target. Once the document is opened, it may allow the attacker to take full control of the system from any location within the system. The issue lies in the loading of the shcore.dll and dcomp.dll files: these files are being searched for by the program in the same system-wide directory where the HTML file is executed.

A DLL hijacking vulnerability in Trend Micro Security 2019 (Consumer) versions below 15.0.0.1163 and below could allow an attacker to manipulate a specific DLL and escalate privileges on vulnerable installations.

Illustrator versions 29.2.1, 28.7.4 and earlier are affected by an Untrusted Search Path vulnerability that might allow attackers to execute their own programs, access unauthorized data files, or modify configuration in unexpected ways. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. The problem extends to any type of critical resource that the application trusts.

Potplayer prior to 1.5.39659: DLL Loading Arbitrary Code Execution Vulnerability

SupportAssist Client version 3.8 and 3.9 contains an Untrusted search path vulnerability that allows attackers to load an arbitrary .dll file via .dll planting/hijacking, only by a separate administrative action that is not a default part of the SOSInstallerTool.exe installation for executing arbitrary dll's,

An issue found in Wondershare Technology Co, Ltd Filmora v.12.0.9 allows a remote attacker to execute arbitrary commands via the filmora_setup_full846.exe.

An issue found in Wondershare Technology Co.,Ltd Edraw-max v.12.0.4 allows a remote attacker to execute arbitrary commands via the edraw-max_setup_full5371.exe file.

Untrusted search path vulnerability in STAMP Workbench installer all versions allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

An issue found in Wondershare Technology Co.,Ltd Creative Centerr v.1.0.8 allows a remote attacker to execute arbitrary commands via the wondershareCC_setup_full10819.exe file.

An issue found in Wondershare Technology Co., Ltd DemoCreator v.6.0.0 allows a remote attacker to execute arbitrary commands via the democreator_setup_full7743.exe file.

An issue found in Wondershare Technology Co.,Ltd MobileTrans v.4.0.2 allows a remote attacker to execute arbitrary commands via the mobiletrans_setup_full5793.exe file.

An issue found in Wondershare Technology Co, Ltd Edrawmind v.10.0.6 allows a remote attacker to executea arbitrary commands via the WindowsCodescs.dll file.

An issue found in Wondershare Technology Co.,Ltd Dr.Fone v.12.4.9 allows a remote attacker to execute arbitrary commands via the drfone_setup_full3360.exe file.

Creative Cloud version 5.9.1 (and earlier) is affected by an Untrusted Search Path vulnerability that might allow attackers to execute their own programs, access unauthorized data files, or modify configuration in unexpected ways. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. The problem extends to any type of critical resource that the application trusts.

Git for Windows is the Windows port of the revision control system Git. Prior to Git for Windows version 2.39.2, when `gitk` is run on Windows, it potentially runs executables from the current directory inadvertently, which can be exploited with some social engineering to trick users into running untrusted code. A patch is available in version 2.39.2. As a workaround, avoid using `gitk` (or Git GUI's "Visualize History" functionality) in clones of untrusted repositories.

IBM Aspera Connect 3.9.9 could allow a remote attacker to execute arbitrary code on the system, caused by improper loading of Dynamic Link Libraries by the import feature. By persuading a victim to open a specially-crafted .DLL file, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 183190.

Untrusted search path vulnerability in ELECOM Camera Assistant 1.00 and QuickFileDealer Ver.1.2.1 and earlier allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

Microsoft Office Remote Code Execution Vulnerability

Substance3D - Painter versions 10.1.0 and earlier are affected by an Untrusted Search Path vulnerability that might allow attackers to execute arbitrary code. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. The problem extends to any type of critical resource that the application trusts. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Microsoft.SqlServer.XEvent.Configuration.dll Remote Code Execution Vulnerability

An issue was discovered in IDM UltraEdit through 24.10.0.32. To exploit the vulnerability, on unpatched Windows systems, an attacker could include in the same directory as the affected executable a DLL using the name of a Windows DLL. This DLL must be preloaded by the executable (for example, "ntmarta.dll"). When the installer EXE is executed by the user, the DLL located in the EXE's current directory will be loaded instead of the Windows DLL, allowing the attacker to run arbitrary code on the affected system.

Adobe Framemaker versions 2020.6, 2022.4 and earlier are affected by an Untrusted Search Path vulnerability that could lead to arbitrary code execution. An attacker could exploit this vulnerability by inserting a malicious path into the search directories, which the application could unknowingly execute. This could allow the attacker to execute arbitrary code in the context of the current user. Exploitation of this issue requires user interaction.

Untrusted search path vulnerability in Self-extracting archive files created by IExpress bundled with Microsoft Windows allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

An uncontrolled DLL loading path vulnerability exists in AsusSoftwareManagerAgent. A local attacker may influence the application to load a DLL from an attacker-controlled location, potentially resulting in arbitrary code execution. Refer to the ' Security Update for MyASUS' section on the ASUS Security Advisory for more information.

Microsoft Office Remote Code Execution Vulnerability

GitPython is a python library used to interact with Git repositories. When resolving a program, Python/Windows look for the current working directory, and after that the PATH environment. GitPython defaults to use the `git` command, if a user runs GitPython from a repo has a `git.exe` or `git` executable, that program will be run instead of the one in the user's `PATH`. This is more of a problem on how Python interacts with Windows systems, Linux and any other OS aren't affected by this. But probably people using GitPython usually run it from the CWD of a repo. An attacker can trick a user to download a repository with a malicious `git` executable, if the user runs/imports GitPython from that directory, it allows the attacker to run any arbitrary commands. There is no fix currently available for windows users, however there are a few mitigations. 1: Default to an absolute path for the git program on Windows, like `C:\\Program Files\\Git\\cmd\\git.EXE` (default git path installation). 2: Require users to set the `GIT_PYTHON_GIT_EXECUTABLE` environment variable on Windows systems. 3: Make this problem prominent in the documentation and advise users to never run GitPython from an untrusted repo, or set the `GIT_PYTHON_GIT_EXECUTABLE` env var to an absolute path. 4: Resolve the executable manually by only looking into the `PATH` environment variable.

Dimension versions 3.4.11 and earlier are affected by an Untrusted Search Path vulnerability that could lead to arbitrary code execution. An attacker could exploit this vulnerability by inserting a malicious file into the search path, which the application might execute instead of the legitimate file. This could occur if the application uses a search path to locate executables or libraries. Exploitation of this issue requires user interaction.

On Windows, if Git LFS operates on a malicious repository with a `..exe` file as well as a file named `git.exe`, and `git.exe` is not found in `PATH`, the `..exe` program will be executed, permitting the attacker to execute arbitrary code. This does not affect Unix systems. Similarly, if the malicious repository contains files named `..exe` and `cygpath.exe`, and `cygpath.exe` is not found in `PATH`, the `..exe` program will be executed when certain Git LFS commands are run. More generally, if the current working directory contains any file with a base name of `.` and a file extension from `PATHEXT` (except `.bat` and `.cmd`), and also contains another file with the same base name as a program Git LFS intends to execute (such as `git`, `cygpath`, or `uname`) and any file extension from `PATHEXT` (including `.bat` and `.cmd`), then, on Windows, when Git LFS attempts to execute the intended program the `..exe`, `..com`, etc., file will be executed instead, but only if the intended program is not found in any directory listed in `PATH`. The vulnerability occurs because when Git LFS detects that the program it intends to run does not exist in any directory listed in `PATH` then Git LFS passes an empty string as the executable file path to the Go `os/exec` package, which contains a bug such that, on Windows, it prepends the name of the current working directory (i.e., `.`) to the empty string without adding a path separator, and as a result searches in that directory for a file with the base name `.` combined with any file extension from `PATHEXT`, executing the first one it finds. (The reason `..bat` and `..cmd` files are not executed in the same manner is that, although the Go `os/exec` package tries to execute them just as it does a `..exe` file, the Microsoft Win32 API `CreateProcess()` family of functions have an undocumented feature in that they apparently recognize when a caller is attempting to execute a batch script file and instead run the `cmd.exe` command interpreter, passing the full set of command line arguments as parameters. These are unchanged from the command line arguments set by Git LFS, and as such, the intended program's name is the first, resulting in a command line like `cmd.exe /c git`, which then fails.) Git LFS has resolved this vulnerability by always reporting an error when a program is not found in any directory listed in `PATH` rather than passing an empty string to the Go `os/exec` package in this case. The bug in the Go `os/exec` package has been reported to the Go project and is expected to be patched after this security advisory is published. The problem was introduced in version 2.12.1 and is patched in version 3.1.3. Users of affected versions should upgrade to version 3.1.3. There are currently no known workarounds at this time.

The agent in Bomgar Remote Support 15.2.x before 15.2.3, 16.1.x before 16.1.5, and 16.2.x before 16.2.4 allows DLL hijacking because of weak %SYSTEMDRIVE%\ProgramData permissions.

mDNSResponder.exe is vulnerable to DLL Sideloading attack. Executable improperly specifies how to load the DLL, from which folder and under what conditions. In these scenarios, a malicious attacker could be using the valid and legitimate executable to load malicious files.

Rapid7 AppSpider Pro installers prior to version 6.14.053 contain a DLL preloading vulnerability, wherein it is possible for the installer to load a malicious DLL located in the current working directory of the installer.

A maliciously crafted binary file, when present while loading files in certain Autodesk applications, could lead to execution of arbitrary code in the context of the current process due to an untrusted search path being utilized.

A vulnerability was found in Viscosity 1.6.7. It has been classified as critical. This affects an unknown part of the component DLL Handler. The manipulation leads to untrusted search path. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.6.8 is able to address this issue. It is recommended to upgrade the affected component.

Untrusted search path vulnerability in the installer of PhishWall Client Internet Explorer version Ver. 3.7.13 and earlier allows remote attackers to gain privileges via a Trojan horse DLL in an unspecified directory.

Untrusted search path vulnerability in Setup file of advance preparation for e-Tax software (WEB version) (1.17.1) and earlier allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.