In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable DMCUB timeout for DCN35 [Why] DMCUB can intermittently take longer than expected to process commands. Old ASIC policy was to continue while logging a diagnostic error - which works fine for ASIC without IPS, but with IPS this could lead to a race condition where we attempt to access DCN state while it's inaccessible, leading to a system hang when the NIU port is not disabled or register accesses that timeout and the display configuration in an undefined state. [How] We need to investigate why these accesses take longer than expected, but for now we should disable the timeout on DCN35 to avoid this race condition. Since the waits happen only at lower interrupt levels the risk of taking too long at higher IRQ and causing a system watchdog timeout are minimal.

In the Linux kernel, the following vulnerability has been resolved: vfs: Don't evict inode under the inode lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xattr) may do inode lookup in the inode evicting callback function, if the inode lookup is operated under the inode lru traversing context, deadlock problems may happen. Case 1: In function ext4_evict_inode(), the ea inode lookup could happen if ea_inode feature is enabled, the lookup process will be stuck under the evicting context like this: 1. File A has inode i_reg and an ea inode i_ea 2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea 3. Then, following three processes running like this: PA PB echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // i_reg is added into lru, lru->i_ea->i_reg prune_icache_sb list_lru_walk_one inode_lru_isolate i_ea->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(i_reg) spin_unlock(&i_reg->i_lock) spin_unlock(lru_lock) rm file A i_reg->nlink = 0 iput(i_reg) // i_reg->nlink is 0, do evict ext4_evict_inode ext4_xattr_delete_inode ext4_xattr_inode_dec_ref_all ext4_xattr_inode_iget ext4_iget(i_ea->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(i_ea) ----→ AA deadlock dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&i_ea->i_state) Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file deleting process holds BASEHD's wbuf->io_mutex while getting the xattr inode, which could race with inode reclaiming process(The reclaiming process could try locking BASEHD's wbuf->io_mutex in inode evicting function), then an ABBA deadlock problem would happen as following: 1. File A has inode ia and a xattr(with inode ixa), regular file B has inode ib and a xattr. 2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa 3. Then, following three processes running like this: PA PB PC echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // ib and ia are added into lru, lru->ixa->ib->ia prune_icache_sb list_lru_walk_one inode_lru_isolate ixa->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(ib) spin_unlock(&ib->i_lock) spin_unlock(lru_lock) rm file B ib->nlink = 0 rm file A iput(ia) ubifs_evict_inode(ia) ubifs_jnl_delete_inode(ia) ubifs_jnl_write_inode(ia) make_reservation(BASEHD) // Lock wbuf->io_mutex ubifs_iget(ixa->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(ixa) | iput(ib) // ib->nlink is 0, do evict | ubifs_evict_inode | ubifs_jnl_delete_inode(ib) ↓ ubifs_jnl_write_inode ABBA deadlock ←-----make_reservation(BASEHD) dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&ixa->i_state) Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING to pin the inode in memory while inode_lru_isolate( ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ip: Fix data-races around sysctl_ip_prot_sock. sysctl_ip_prot_sock is accessed concurrently, and there is always a chance of data-race. So, all readers and writers need some basic protection to avoid load/store-tearing.

In the Linux kernel, the following vulnerability has been resolved: lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc() If we need to increase the tree depth, allocate a new node, and then race with another thread that increased the tree depth before us, we'll still have a preallocated node that might be used later. If we then use that node for a new non-root node, it'll still have a pointer to the old root instead of being zeroed - fix this by zeroing it in the cmpxchg failure path.

The em_syscall function in arch/x86/kvm/emulate.c in the KVM implementation in the Linux kernel before 3.2.14 does not properly handle the 0f05 (aka syscall) opcode, which allows guest OS users to cause a denial of service (guest OS crash) via a crafted application, as demonstrated by an NASM file.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer There are 3 possible interrupt sources are handled by DP controller, HPDstatus, Controller state changes and Aux read/write transaction. At every irq, DP controller have to check isr status of every interrupt sources and service the interrupt if its isr status bits shows interrupts are pending. There is potential race condition may happen at current aux isr handler implementation since it is always complete dp_aux_cmd_fifo_tx() even irq is not for aux read or write transaction. This may cause aux read transaction return premature if host aux data read is in the middle of waiting for sink to complete transferring data to host while irq happen. This will cause host's receiving buffer contains unexpected data. This patch fixes this problem by checking aux isr and return immediately at aux isr handler if there are no any isr status bits set. Current there is a bug report regrading eDP edid corruption happen during system booting up. After lengthy debugging to found that VIDEO_READY interrupt was continuously firing during system booting up which cause dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data from aux hardware buffer which is not yet contains complete data transfer from sink. This cause edid corruption. Follows are the signature at kernel logs when problem happen, EDID has corrupt header panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID Changes in v2: -- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr() -- add more commit text Changes in v3: -- add Stephen suggested -- dp_aux_isr() return IRQ_XXX back to caller -- dp_ctrl_isr() return IRQ_XXX back to caller Changes in v4: -- split into two patches Changes in v5: -- delete empty line between tags Changes in v6: -- remove extra "that" and fixed line more than 75 char at commit text Patchwork: https://patchwork.freedesktop.org/patch/516121/

The load_elf_binary function in fs/binfmt_elf.c in the Linux kernel before 2.6.32.8 on the x86_64 platform does not ensure that the ELF interpreter is available before a call to the SET_PERSONALITY macro, which allows local users to cause a denial of service (system crash) via a 32-bit application that attempts to execute a 64-bit application and then triggers a segmentation fault, as demonstrated by amd64_killer, related to the flush_old_exec function.

In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_uart: properly fix race condition The cros_ec_uart_probe() function calls devm_serdev_device_open() before it calls serdev_device_set_client_ops(). This can trigger a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ... ? ttyport_receive_buf A simplified version of crashing code is as follows: static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl, const u8 *data, size_t count) { struct serdev_device *serdev = ctrl->serdev; if (!serdev || !serdev->ops->receive_buf) // CRASH! return 0; return serdev->ops->receive_buf(serdev, data, count); } It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops will also exist. This conflicts with the existing cros_ec_uart_probe() logic, as it first calls devm_serdev_device_open() (which sets SERPORT_ACTIVE), and only later sets serdev->ops via serdev_device_set_client_ops(). Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") attempted to fix a similar race condition, but while doing so, made the window of error for this race condition to happen much wider. Attempt to fix the race condition again, making sure we fully setup before calling devm_serdev_device_open().

A memory leak in the sdma_init() function in drivers/infiniband/hw/hfi1/sdma.c in the Linux kernel before 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering rhashtable_init() failures, aka CID-34b3be18a04e. NOTE: This has been disputed as not a vulnerability because "rhashtable_init() can only fail if it is passed invalid values in the second parameter's struct, but when invoked from sdma_init() that is a pointer to a static const struct, so an attacker could only trigger failure if they could corrupt kernel memory (in which case a small memory leak is not a significant problem).

In the Linux kernel, the following vulnerability has been resolved: PCI: of_property: Return error for int_map allocation failure Return -ENOMEM from of_pci_prop_intr_map() if kcalloc() fails to prevent a NULL pointer dereference in this case. [bhelgaas: commit log]

An issue was discovered in the Linux kernel through 5.11.10. drivers/net/ethernet/freescale/gianfar.c in the Freescale Gianfar Ethernet driver allows attackers to cause a system crash because a negative fragment size is calculated in situations involving an rx queue overrun when jumbo packets are used and NAPI is enabled, aka CID-d8861bab48b6.

An issue was discovered in the Linux kernel before 5.11.7. usbip_sockfd_store in drivers/usb/usbip/stub_dev.c allows attackers to cause a denial of service (GPF) because the stub-up sequence has race conditions during an update of the local and shared status, aka CID-9380afd6df70.

A race condition was discovered in get_old_root in fs/btrfs/ctree.c in the Linux kernel through 5.11.8. It allows attackers to cause a denial of service (BUG) because of a lack of locking on an extent buffer before a cloning operation, aka CID-dbcc7d57bffc.

The agp subsystem in the Linux kernel 2.6.38.5 and earlier does not properly restrict memory allocation by the (1) AGPIOC_RESERVE and (2) AGPIOC_ALLOCATE ioctls, which allows local users to cause a denial of service (memory consumption) by making many calls to these ioctls.

The br_multicast_add_group function in net/bridge/br_multicast.c in the Linux kernel before 2.6.38, when a certain Ethernet bridge configuration is used, allows local users to cause a denial of service (memory corruption and system crash) by sending IGMP packets to a local interface.

Double free vulnerability in the inotify subsystem in the Linux kernel before 2.6.39 allows local users to cause a denial of service (system crash) via vectors involving failed attempts to create files. NOTE: this vulnerability exists because of an incorrect fix for CVE-2010-4250.

The blk_rq_map_user_iov function in block/blk-map.c in the Linux kernel before 2.6.37-rc7 allows local users to cause a denial of service (panic) via a zero-length I/O request in a device ioctl to a SCSI device, related to an unaligned map. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-4163.

The blk_rq_map_user_iov function in block/blk-map.c in the Linux kernel before 2.6.36.2 allows local users to cause a denial of service (panic) via a zero-length I/O request in a device ioctl to a SCSI device.

A flaw was found in the way KVM hypervisor handled x2APIC Machine Specific Rregister (MSR) access with nested(=1) virtualization enabled. In that, L1 guest could access L0's APIC register values via L2 guest, when 'virtualize x2APIC mode' is enabled. A guest could use this flaw to potentially crash the host kernel resulting in DoS issue. Kernel versions from 4.16 and newer are vulnerable to this issue.

Multiple integer overflows in fs/bio.c in the Linux kernel before 2.6.36.2 allow local users to cause a denial of service (system crash) via a crafted device ioctl to a SCSI device.

The econet_sendmsg function in net/econet/af_econet.c in the Linux kernel before 2.6.36.2, when an econet address is configured, allows local users to cause a denial of service (NULL pointer dereference and OOPS) via a sendmsg call that specifies a NULL value for the remote address field.

Integer overflow in the ext4_ext_get_blocks function in fs/ext4/extents.c in the Linux kernel before 2.6.34 allows local users to cause a denial of service (BUG and system crash) via a write operation on the last block of a large file, followed by a sync operation.

In the Linux kernel, the following vulnerability has been resolved: wireguard: receive: annotate data-race around receiving_counter.counter Syzkaller with KCSAN identified a data-race issue when accessing keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE() annotations to mark the data race as intentional. BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0: counter_validate drivers/net/wireguard/receive.c:321 [inline] wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461 __napi_poll+0x60/0x3b0 net/core/dev.c:6536 napi_poll net/core/dev.c:6605 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6738 __do_softirq+0xc4/0x279 kernel/softirq.c:553 do_softirq+0x5e/0x90 kernel/softirq.c:454 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499 process_one_work kernel/workqueue.c:2633 [inline] ... read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1: decrypt_packet drivers/net/wireguard/receive.c:252 [inline] wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706 worker_thread+0x525/0x730 kernel/workqueue.c:2787 ...

Multiple integer overflows in the snd_ctl_new function in sound/core/control.c in the Linux kernel before 2.6.36-rc5-next-20100929 allow local users to cause a denial of service (heap memory corruption) or possibly have unspecified other impact via a crafted (1) SNDRV_CTL_IOCTL_ELEM_ADD or (2) SNDRV_CTL_IOCTL_ELEM_REPLACE ioctl call.

In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] <TASK> [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus]

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate meta inode pages forcely Below race case can cause data corruption: Thread A GC thread - gc_data_segment - ra_data_block - locked meta_inode page - f2fs_inplace_write_data - invalidate_mapping_pages : fail to invalidate meta_inode page due to lock failure or dirty|writeback status - f2fs_submit_page_bio : write last dirty data to old blkaddr - move_data_block - load old data from meta_inode page - f2fs_submit_page_write : write old data to new blkaddr Because invalidate_mapping_pages() will skip invalidating page which has unclear status including locked, dirty, writeback and so on, so we need to use truncate_inode_pages_range() instead of invalidate_mapping_pages() to make sure meta_inode page will be dropped.

In the Linux kernel, the following vulnerability has been resolved: tls: fix race between tx work scheduling and socket close Similarly to previous commit, the submitting thread (recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete(). Reorder scheduling the work before calling complete(). This seems more logical in the first place, as it's the inverse order of what the submitting thread will do.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix performance regression in swap operation The patch "netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test", commit 28628fa9 fixes a race condition. But the synchronize_rcu() added to the swap function unnecessarily slows it down: it can safely be moved to destroy and use call_rcu() instead. Eric Dumazet pointed out that simply calling the destroy functions as rcu callback does not work: sets with timeout use garbage collectors which need cancelling at destroy which can wait. Therefore the destroy functions are split into two: cancelling garbage collectors safely at executing the command received by netlink and moving the remaining part only into the rcu callback.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: switchdev: Skip MDB replays of deferred events on offload Before this change, generation of the list of MDB events to replay would race against the creation of new group memberships, either from the IGMP/MLD snooping logic or from user configuration. While new memberships are immediately visible to walkers of br->mdb_list, the notification of their existence to switchdev event subscribers is deferred until a later point in time. So if a replay list was generated during a time that overlapped with such a window, it would also contain a replay of the not-yet-delivered event. The driver would thus receive two copies of what the bridge internally considered to be one single event. On destruction of the bridge, only a single membership deletion event was therefore sent. As a consequence of this, drivers which reference count memberships (at least DSA), would be left with orphan groups in their hardware database when the bridge was destroyed. This is only an issue when replaying additions. While deletion events may still be pending on the deferred queue, they will already have been removed from br->mdb_list, so no duplicates can be generated in that scenario. To a user this meant that old group memberships, from a bridge in which a port was previously attached, could be reanimated (in hardware) when the port joined a new bridge, without the new bridge's knowledge. For example, on an mv88e6xxx system, create a snooping bridge and immediately add a port to it: root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \ > ip link set dev x3 up master br0 And then destroy the bridge: root@infix-06-0b-00:~$ ip link del dev br0 root@infix-06-0b-00:~$ mvls atu ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a DEV:0 Marvell 88E6393X 33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . . 33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . . ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a root@infix-06-0b-00:~$ The two IPv6 groups remain in the hardware database because the port (x3) is notified of the host's membership twice: once via the original event and once via a replay. Since only a single delete notification is sent, the count remains at 1 when the bridge is destroyed. Then add the same port (or another port belonging to the same hardware domain) to a new bridge, this time with snooping disabled: root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \ > ip link set dev x3 up master br1 All multicast, including the two IPv6 groups from br0, should now be flooded, according to the policy of br1. But instead the old memberships are still active in the hardware database, causing the switch to only forward traffic to those groups towards the CPU (port 0). Eliminate the race in two steps: 1. Grab the write-side lock of the MDB while generating the replay list. This prevents new memberships from showing up while we are generating the replay list. But it leaves the scenario in which a deferred event was already generated, but not delivered, before we grabbed the lock. Therefore: 2. Make sure that no deferred version of a replay event is already enqueued to the switchdev deferred queue, before adding it to the replay list, when replaying additions.

In the Linux kernel, the following vulnerability has been resolved: tls: fix race between async notify and socket close The submitting thread (one which called recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete() so any code past that point risks touching already freed data. Try to avoid the locking and extra flags altogether. Have the main thread hold an extra reference, this way we can depend solely on the atomic ref counter for synchronization. Don't futz with reiniting the completion, either, we are now tightly controlling when completion fires.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix IO hang from sbitmap wakeup race In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered with the following blk_mq_get_driver_tag() in case of getting driver tag failure. Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime blk_mq_mark_tag_wait() can't get driver tag successfully. This issue can be reproduced by running the following test in loop, and fio hang can be observed in < 30min when running it on my test VM in laptop. modprobe -r scsi_debug modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4 dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename` fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \ --runtime=100 --numjobs=40 --time_based --name=test \ --ioengine=libaio Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which is just fine in case of running out of tag.

The cifs_create function in fs/cifs/dir.c in the Linux kernel 2.6.33.2 and earlier allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact via a NULL nameidata (aka nd) field in a POSIX file-creation request to a server that supports UNIX extensions.

A race condition was found in the Linux kernel's sound/hda device driver in snd_hdac_regmap_sync() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.

Race condition in the tty_fasync function in drivers/char/tty_io.c in the Linux kernel before 2.6.32.6 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via unknown vectors, related to the put_tty_queue and __f_setown functions. NOTE: the vulnerability was addressed in a different way in 2.6.32.9.

A race condition was found in the Linux kernel's drm/exynos device driver in exynos_drm_crtc_atomic_disable() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.

The Linux kernel 2.6.9 through 2.6.17 on the x86_64 and amd64 platforms allows local users to cause a denial of service (panic) via a 32-bit application that calls mprotect on its Virtual Dynamic Shared Object (VDSO) page and then triggers a segmentation fault.

A memory leak in the bfad_im_get_stats() function in drivers/scsi/bfa/bfad_attr.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering bfa_port_get_stats() failures, aka CID-0e62395da2bd.

drivers/firewire/ohci.c in the Linux kernel before 2.6.32-git9, when packet-per-buffer mode is used, allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unknown other impact via an unspecified ioctl associated with receiving an ISO packet that contains zero in the payload-length field.

A race condition accessing file object in the Linux kernel OverlayFS subsystem was found in the way users do rename in specific way with OverlayFS. A local user could use this flaw to crash the system.

The md driver (drivers/md/md.c) in the Linux kernel before 2.6.30.2 might allow local users to cause a denial of service (NULL pointer dereference) via vectors related to "suspend_* sysfs attributes" and the (1) suspend_lo_store or (2) suspend_hi_store functions. NOTE: this is only a vulnerability when sysfs is writable by an attacker.

The inode double locking code in fs/ocfs2/file.c in the Linux kernel 2.6.30 before 2.6.30-rc3, 2.6.27 before 2.6.27.24, 2.6.29 before 2.6.29.4, and possibly other versions down to 2.6.19 allows local users to cause a denial of service (prevention of file creation and removal) via a series of splice system calls that trigger a deadlock between the generic_file_splice_write, splice_from_pipe, and ocfs2_file_splice_write functions.

A flaw was found in the Netfilter subsystem of the Linux kernel. A race condition between IPSET_CMD_ADD and IPSET_CMD_SWAP can lead to a kernel panic due to the invocation of `__ip_set_put` on a wrong `set`. This issue may allow a local user to crash the system.

The console selection feature in the Linux kernel 2.6.28 before 2.6.28.4, 2.6.25, and possibly earlier versions, when the UTF-8 console is used, allows physically proximate attackers to cause a denial of service (memory corruption) by selecting a small number of 3-byte UTF-8 characters, which triggers an "off-by-two memory error." NOTE: it is not clear whether this issue crosses privilege boundaries.

The shm_get_stat function in ipc/shm.c in the shm subsystem in the Linux kernel before 2.6.28.5, when CONFIG_SHMEM is disabled, misinterprets the data type of an inode, which allows local users to cause a denial of service (system hang) via an SHM_INFO shmctl call, as demonstrated by running the ipcs program.

The (1) hugetlb_vmtruncate_list and (2) hugetlb_vmtruncate functions in fs/hugetlbfs/inode.c in the Linux kernel before 2.6.19-rc4 perform certain prio_tree calculations using HPAGE_SIZE instead of PAGE_SIZE units, which allows local users to cause a denial of service (panic) via unspecified vectors.

In the Linux kernel through 5.4.6, there is a NULL pointer dereference in drivers/scsi/libsas/sas_discover.c because of mishandling of port disconnection during discovery, related to a PHY down race condition, aka CID-f70267f379b5.

In the Linux kernel, the following vulnerability has been resolved: pds_core: Prevent race issues involving the adminq There are multiple paths that can result in using the pdsc's adminq. [1] pdsc_adminq_isr and the resulting work from queue_work(), i.e. pdsc_work_thread()->pdsc_process_adminq() [2] pdsc_adminq_post() When the device goes through reset via PCIe reset and/or a fw_down/fw_up cycle due to bad PCIe state or bad device state the adminq is destroyed and recreated. A NULL pointer dereference can happen if [1] or [2] happens after the adminq is already destroyed. In order to fix this, add some further state checks and implement reference counting for adminq uses. Reference counting was used because multiple threads can attempt to access the adminq at the same time via [1] or [2]. Additionally, multiple clients (i.e. pds-vfio-pci) can be using [2] at the same time. The adminq_refcnt is initialized to 1 when the adminq has been allocated and is ready to use. Users/clients of the adminq (i.e. [1] and [2]) will increment the refcnt when they are using the adminq. When the driver goes into a fw_down cycle it will set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent any further adminq_refcnt increments. Waiting for the adminq_refcnt to hit 1 allows for any current users of the adminq to finish before the driver frees the adminq. Once the adminq_refcnt hits 1 the driver clears the refcnt to signify that the adminq is deleted and cannot be used. On the fw_up cycle the driver will once again initialize the adminq_refcnt to 1 allowing the adminq to be used again.

The inotify_read function in the Linux kernel 2.6.27 to 2.6.27.13, 2.6.28 to 2.6.28.2, and 2.6.29-rc3 allows local users to cause a denial of service (OOPS) via a read with an invalid address to an inotify instance, which causes the device's event list mutex to be unlocked twice and prevents proper synchronization of a data structure for the inotify instance.

A memory leak in the mwifiex_pcie_alloc_cmdrsp_buf() function in drivers/net/wireless/marvell/mwifiex/pcie.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering mwifiex_map_pci_memory() failures, aka CID-db8fd2cde932.

A memory leak in the cx23888_ir_probe() function in drivers/media/pci/cx23885/cx23888-ir.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering kfifo_alloc() failures, aka CID-a7b2df76b42b.