WAGO IO 750-849 01.01.27 and 01.02.05, WAGO IO 750-881, and WAGO IO 758-870 have weak credential management.

In multiple managed switches by WAGO in different versions the activated directory listing provides an attacker with the index of the resources located inside the directory.

In multiple managed switches by WAGO in different versions the webserver cookies of the web based UI contain user credentials.

In multiple managed switches by WAGO in different versions special crafted requests can lead to cookies being transferred to third parties.

In multiple managed switches by WAGO in different versions it is possible to read out the password hashes of all Web-based Management users.

A cleartext transmission vulnerability exists in the network communication functionality of WAGO e!Cockpit version 1.5.1.1. An attacker with access to network traffic can easily intercept, interpret, and manipulate data coming from, or destined for e!Cockpit. This includes passwords, configurations, and binaries being transferred to endpoints.

Information Disclosure is possible on WAGO Series PFC100 and PFC200 devices before FW12 due to improper access control. A remote attacker can check for the existence of paths and file names via crafted HTTP requests.

An exploitable regular expression without anchors vulnerability exists in the Web-Based Management (WBM) authentication functionality of WAGO PFC200 versions 03.00.39(12) and 03.01.07(13), and WAGO PFC100 version 03.00.39(12). A specially crafted authentication request can bypass regular expression filters, resulting in sensitive information disclosure.

An exploitable information exposure vulnerability exists in the iocheckd service "I/O-Check" functionality of WAGO PFC200 Firmware versions 03.01.07(13) and 03.00.39(12), and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets can cause an external tool to fail, resulting in uninitialized stack data to be copied to the response packet buffer. An attacker can send unauthenticated packets to trigger this vulnerability.

A CORS Misconfiguration in the web-based management allows a malicious third party webserver to misuse all basic information pages on the webserver. In combination with CVE-2022-45138 this could lead to disclosure of device information like CPU diagnostics. As there is just a limited amount of information readable the impact only affects a small subset of confidentiality.

An information disclosure vulnerability exists when the Windows TCP/IP stack improperly handles fragmented IP packets, aka 'Windows TCP/IP Information Disclosure Vulnerability'.

IBM UrbanCode Deploy (UCD) 7.1.1.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

Information from SSL-encrypted sessions via PKCS #1.

cipher/elgamal.c in Libgcrypt through 1.8.2, when used to encrypt messages directly, improperly encodes plaintexts, which allows attackers to obtain sensitive information by reading ciphertext data (i.e., it does not have semantic security in face of a ciphertext-only attack). The Decisional Diffie-Hellman (DDH) assumption does not hold for Libgcrypt's ElGamal implementation.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

Philips IntelliSpace Portal all versions of 8.0.x, and 7.0.x have a vulnerability using SSL legacy encryption that could allow an attacker to gain unauthorized access to resources and information.

The Birthday attack against 64-bit block ciphers flaw (CVE-2016-2183) was reported for the health checks port (9979) on etcd grpc-proxy component. Even though the CVE-2016-2183 has been fixed in the etcd components, to enable periodic health checks from kubelet, it was necessary to open up a new port (9979) on etcd grpc-proxy, hence this port might be considered as still vulnerable to the same type of vulnerability. The health checks on etcd grpc-proxy do not contain sensitive data (only metrics data), therefore the potential impact related to this vulnerability is minimal. The CVE-2023-0296 has been assigned to this issue to track the permanent fix in the etcd component.

The client in EMC RSA BSAFE Micro Edition Suite (MES) 4.0.x before 4.0.9 and 4.1.x before 4.1.5 places the weakest algorithms first in a signature-algorithm list transmitted to a server, which makes it easier for remote attackers to defeat cryptographic protection mechanisms by leveraging server behavior in which the first algorithm is used.

Econolite EOS versions prior to 3.2.23 use a weak hash algorithm for encrypting privileged user credentials. A configuration file that is accessible without authentication uses MD5 hashes for encrypting credentials, including those of administrators and technicians.

Vyper is a Pythonic Smart Contract Language for the EVM. There is an error in the stack management when compiling the `IR` for `sha3_64`. Concretely, the `height` variable is miscalculated. The vulnerability can't be triggered without writing the `IR` by hand (that is, it cannot be triggered from regular vyper code). `sha3_64` is used for retrieval in mappings. No flow that would cache the `key` was found so the issue shouldn't be possible to trigger when compiling the compiler-generated `IR`. This issue isn't triggered during normal compilation of vyper code so the impact is low. At the time of publication there is no patch available.

The default configuration of the Wi-Fi component on the Huawei D100 does not use encryption, which makes it easier for remote attackers to obtain sensitive information by sniffing the network.

IBM Security Verify 10.0.0, 10.0.1.0, and 10.0.2.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210067.

In JetBrains TeamCity before 2021.1, an insecure key generation mechanism for encrypted properties was used.

Brocade SANnav before SANnav 2.3.1b enables weak TLS ciphers on ports 443 and 18082. In case of a successful exploit, an attacker can read Brocade SANnav data stream that includes monitored Brocade Fabric OS switches performance data, port status, zoning information, WWNs, IP Addresses, but no customer data, no personal data and no secrets or passwords, as it travels across the network.

IBM Sterling B2B Integrator Standard Edition 5.2.0.1, 5.2.6.3_6, 6.0.0.0, and 6.0.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 147294.

The use of a broken or risky cryptographic algorithm in Philips Vue PACS versions 12.2.x.x and prior is an unnecessary risk that may result in the exposure of sensitive information.

An Information Exposure vulnerability in Juniper Networks SRC Series devices configured for NETCONF over SSH permits the negotiation of weak ciphers, which could allow a remote attacker to obtain sensitive information. A remote attacker with read and write access to network data could exploit this vulnerability to display plaintext bits from a block of ciphertext and obtain sensitive information. This issue affects all Juniper Networks SRC Series versions prior to 4.13.0-R6.

IBM Sterling Secure Proxy 6.0.1, 6.0.2, 2.4.3.2, and 3.4.3.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-ForceID: 201100.

IBM Tivoli Netcool/Impact 7.1.0.20 and 7.1.0.21 uses an insecure SSH server configuration which enables weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 203556.

IBM Security SOAR uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Sterling Secure Proxy 6.0.1, 6.0.2, 2.4.3.2, and 3.4.3.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 201095.

In JetBrains Ktor before 1.4.2, weak cipher suites were enabled by default.

Bouncy Castle BC 1.54 - 1.59, BC-FJA 1.0.0, BC-FJA 1.0.1 and earlier have a flaw in the Low-level interface to RSA key pair generator, specifically RSA Key Pairs generated in low-level API with added certainty may have less M-R tests than expected. This appears to be fixed in versions BC 1.60 beta 4 and later, BC-FJA 1.0.2 and later.

An issue was discovered in SMA Solar Technology products. The inverters make use of a weak hashing algorithm to encrypt the password for REGISTER requests. This hashing algorithm can be cracked relatively easily. An attacker will likely be able to crack the password using offline crackers. This cracked password can then be used to register at the SMA servers. NOTE: the vendor's position is that "we consider the probability of the success of such manipulation to be extremely low." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

IBM Cloud Pak System 2.3.0 through 2.3.3.3 Interim Fix 1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 197498.

IBM Security Verify Access Docker 10.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 197969

IBM Security Guardium 11.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 196280.

IBM QRadar SIEM 7.3.0 to 7.3.3 Patch 8 and 7.4.0 to 7.4.3 GA uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 194448.

IBM Guardium Data Encryption (GDE) 3.0.0.3 and 4.0.0.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 195711.

libxcrypt in SUSE openSUSE 11.0 uses the DES algorithm when the configuration specifies the MD5 algorithm, which makes it easier for attackers to conduct brute-force attacks against hashed passwords.

Firmware developed by Shenzhen Hichip Vision Technology (V6 through V20), as used by many different vendors in millions of Internet of Things devices, suffers from cryptographic issues that allow remote attackers to access user session data, as demonstrated by eavesdropping on user video/audio streams, capturing credentials, and compromising devices. This affects products marketed under the following brand names: Accfly, Alptop, Anlink, Besdersec, BOAVISION, COOAU, CPVAN, Ctronics, D3D Security, Dericam, Elex System, Elite Security, ENSTER, ePGes, Escam, FLOUREON, GENBOLT, Hongjingtian (HJT), ICAMI, Iegeek, Jecurity, Jennov, KKMoon, LEFTEK, Loosafe, Luowice, Nesuniq, Nettoly, ProElite, QZT, Royallite, SDETER, SV3C, SY2L, Tenvis, ThinkValue, TOMLOV, TPTEK, WGCC, and ZILINK.

EnroCrypt is a Python module for encryption and hashing. Prior to version 1.1.4, EnroCrypt used the MD5 hashing algorithm in the hashing file. Beginners who are unfamiliar with hashes can face problems as MD5 is considered an insecure hashing algorithm. The vulnerability is patched in v1.1.4 of the product. As a workaround, users can remove the `MD5` hashing function from the file `hashing.py`.

IceHrm before 23.0.1.OS has a risky usage of a hashed password in a request.

In Apache NiFi 1.2.0 to 1.11.4, the NiFi UI and API were protected by mandating TLS v1.2, as well as listening connections established by processors like ListenHTTP, HandleHttpRequest, etc. However intracluster communication such as cluster request replication, Site-to-Site, and load balanced queues continued to support TLS v1.0 or v1.1.

A CWE-327: Use of a Broken or Risky Cryptographic Algorithm vulnerability exists where weak cipher suites can be used for the SSH connection between Easergy Pro software and the device, which may allow an attacker to observe protected communication details. Affected Products: Easergy P5 (V01.401.102 and prior)

The Visionsoft Audit on Demand Service (VSAOD) in Visionsoft Audit 12.4.0.0 uses weak cryptography (XOR) when (1) transmitting passwords, which allows remote attackers to obtain sensitive information by sniffing the network; and (2) storing passwords in the configuration file, which allows local users to obtain sensitive information by reading this file.

VMware vSphere Data Protection (VDP) 6.1.x, 6.0.x, 5.8.x, and 5.5.x locally stores vCenter Server credentials using reversible encryption. This issue may allow plaintext credentials to be obtained.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the affected products use a weak cryptographic algorithm, which may allow confidential information to be disclosed.

Dell NetWorker Virtual Edition versions 19.8 and below contain the use of deprecated cryptographic algorithms in the SSH component. A remote unauthenticated attacker could potentially exploit this vulnerability leading to some information disclosure.

A potential security vulnerability has been identified in HPE StoreOnce Software. The SSH server supports weak key exchange algorithms which could lead to remote unauthorized access. HPE has made the following software update to resolve the vulnerability in HPE StoreOnce Software 4.3.2.