Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

The post-authentication command injection vulnerability in Zyxel NAS326 firmware versions through V5.21(AAZF.15)C0 and NAS542 firmware versions through V5.21(ABAG.12)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands by sending a crafted query parameter attached to the URL of an affected device’s web management interface.

A vulnerability, which was classified as critical, has been found in Ruijie RG-EG350 up to 20240318. Affected by this issue is the function vpnAction of the file /itbox_pi/vpn_quickset_service.php?a=set_vpn of the component HTTP POST Request Handler. The manipulation of the argument ip/port/user/pass/dns/startIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-257978 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

This affects the package systeminformation before 4.27.11. This package is vulnerable to Command Injection. The attacker can concatenate curl's parameters to overwrite Javascript files and then execute any OS commands.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability classified as critical has been found in Tenda AC7 15.03.06.44. Affected is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-257940. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\snmpwalk.php does not properly restrict popen calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in a parameter.

A remote attacker with high privileges may use a writing file function to inject OS commands.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

The EyesOfNetwork web interface (aka eonweb) 5.1-0 allows remote command execution via shell metacharacters in a hosts_cacti array parameter to module/admin_device/index.php.

A remote attacker with high privileges may use a reading file function to inject OS commands.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

contentHostProperties.php in Rasilient PixelStor 5000 K:4.0.1580-20150629 (KDI Version) allows authenticated attackers to remotely execute code via the name parameter.

Tenda W20E V16.01.0.6(3392) is vulnerable to Command injection via cmd_get_ping_output.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\interface.php does not properly restrict exec calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in the host_list parameter to module/tool_all/select_tool.php.

A remote attacker with high privileges may use a deleting file function to inject OS commands.

SVR-116 firmware version 1.6.0.30028871 allows a remote authenticated attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

SOY CMS is an open source CMS (content management system) that allows you to build blogs and online shops. SOY CMS versions prior to 3.14.2 are vulnerable to an OS Command Injection vulnerability within the file upload feature when accessed by an administrator. The vulnerability enables the execution of arbitrary OS commands through specially crafted file names containing a semicolon, affecting the jpegoptim functionality. This vulnerability has been patched in version 3.14.2. Users are advised to upgrade. There are no known workarounds for this vulnerability.

T&W WIFI Repeater BE126 allows remote authenticated users to execute arbitrary code via shell metacharacters in the user parameter to cgi-bin/webupg.

A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257667. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability in Trend Micro Smart Protection Server (Standalone) 3.1 and 3.2 server administration UI allows attackers with authenticated access to execute arbitrary code on vulnerable installations.

A vulnerability classified as critical has been found in Tenda AC18 15.03.05.05. Affected is the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-257778 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Guardium 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 124633.

A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257775. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Three OS command injection vulnerabilities exist in the web interface I/O configuration functionality of MC Technologies MC LR Router 2.10.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability refers to the authetnicated OS Command injection that occurs through the attacker-controlled `timer1` parameter, at offset `0x8e80`.

Command injection vulnerability in Document.php in Synology Office 2.2.0-1502 and 2.2.1-1506 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the crafted file name of RTF documents.

Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An arbitrary code exection vulnerability exists in Linksys WUMC710 Wireless-AC Universal Media Connector with firmware <= 1.0.02 (build3). The do_setNTP function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious GET or POST request to /setNTP.cgi to execute arbitrary commands on the underlying Linux operating system as root.

Sewio’s Real-Time Location System (RTLS) Studio version 2.0.0 up to and including version 2.6.2 does not properly validate the input module name to the monitor services of the software. This could allow a remote attacker to access sensitive functions of the application and execute arbitrary system commands.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.

IBM Security Guardium 11.4 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 240901.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.

Delta Electronics DX-2100-L1-CN 2.42 is vulnerable to Command Injection via lform/net_diagnose.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

Belkin LINKSYS RE6500 devices before 1.0.11.001 allow remote authenticated users to execute arbitrary commands via goform/systemCommand?command= in conjunction with the goform/pingstart program.

NVIDIA BMC contains a vulnerability in SPX REST API, where an authorized attacker can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure and data tampering.

The Unlimited Elements For Elementor (Free Widgets, Addons, Templates) plugin for WordPress is vulnerable to command injection in all versions up to, and including, 1.5.102. This is due to insufficient filtering of template attributes during the creation of HTML for custom widgets This makes it possible for authenticated attackers, with administrator-level access and above, to execute arbitrary commands on the server.

A vulnerability has been found in Tenda AC10U 15.03.06.49 and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-257458 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function sub_3517C of the file /goform/setWan. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setDFSSetting of the file /goform/setLan. The manipulation of the argument lanNetmask/lanIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function um_red of the file /goform/RP_setBasicAuto. The manipulation of the argument hname leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

NVIDIA BMC contains a vulnerability in SPX REST API, where an authorized attacker can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure and data tampering.

Multiple vulnerabilities in Cisco Routed PON Controller Software, which runs as a docker container on hardware that is supported by Cisco IOS XR Software, could allow an authenticated, remote attacker with Administrator-level privileges on the PON Manager or direct access to the PON Manager MongoDB instance to perform command injection attacks on the PON Controller container and execute arbitrary commands as root. These vulnerabilities are due to insufficient validation of arguments that are passed to specific configuration commands. An attacker could exploit these vulnerabilities by including crafted input as the argument of an affected configuration command. A successful exploit could allow the attacker to execute arbitrary commands as root on the PON controller.

The end-of-life Netgear FVS336Gv2 and FVS336Gv3 are affected by a command injection vulnerability in the Telnet interface. An authenticated and remote attacker can execute arbitrary OS commands as root over Telnet by sending crafted "util backup_configuration" commands.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Realtek GPON router has insufficient filtering for special characters. A remote attacker authenticated as an administrator can exploit this vulnerability to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

A post-authentication command injection vulnerability in the CLI command of Zyxel ZyWALL/USG series firmware versions 4.20 through 4.72, VPN series firmware versions 4.30 through 5.32, USG FLEX series firmware versions 4.50 through 5.32, and ATP series firmware versions 4.32 through 5.32, which could allow an authenticated attacker with administrator privileges to execute OS commands.