In FreeBSD 12.1-STABLE before r356035, 12.1-RELEASE before 12.1-RELEASE-p4, 11.3-STABLE before r356036, and 11.3-RELEASE before 11.3-RELEASE-p8, incomplete packet data validation may result in accessing out-of-bounds memory leading to a kernel panic or other unpredictable results.

Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.

ONTAP Select Deploy administration utility versions 2.12 & 2.12.1 ship with an HTTP service bound to the network allowing unauthenticated remote attackers to perform administrative actions.

Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.

In FreeBSD 12.0-STABLE before r350648, 12.0-RELEASE before 12.0-RELEASE-p9, 11.3-STABLE before r350650, 11.3-RELEASE before 11.3-RELEASE-p2, and 11.2-RELEASE before 11.2-RELEASE-p13, the ICMPv6 input path incorrectly handles cases where an MLDv2 listener query packet is internally fragmented across multiple mbufs. A remote attacker may be able to cause an out-of-bounds read or write that may cause the kernel to attempt to access an unmapped page and subsequently panic.

ONTAP Select Deploy administration utility versions 2.11.2 through 2.12.2 are susceptible to a code injection vulnerability which when successfully exploited could allow an unauthenticated remote attacker to enable and use a privileged user account.

libcurl versions from 7.36.0 to before 7.64.0 are vulnerable to a stack-based buffer overflow. The function creating an outgoing NTLM type-3 header (`lib/vauth/ntlm.c:Curl_auth_create_ntlm_type3_message()`), generates the request HTTP header contents based on previously received data. The check that exists to prevent the local buffer from getting overflowed is implemented wrongly (using unsigned math) and as such it does not prevent the overflow from happening. This output data can grow larger than the local buffer if very large 'nt response' data is extracted from a previous NTLMv2 header provided by the malicious or broken HTTP server. Such a 'large value' needs to be around 1000 bytes or more. The actual payload data copied to the target buffer comes from the NTLMv2 type-2 response header.

FasterXML jackson-databind 2.x before 2.9.10.2 lacks certain net.sf.ehcache blocking.

pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.

An issue was discovered in net/ipv4/sysctl_net_ipv4.c in the Linux kernel before 5.0.11. There is a net/ipv4/tcp_input.c signed integer overflow in tcp_ack_update_rtt() when userspace writes a very large integer to /proc/sys/net/ipv4/tcp_min_rtt_wlen, leading to a denial of service or possibly unspecified other impact, aka CID-19fad20d15a6.

Included in Log4j 1.2 is a SocketServer class that is vulnerable to deserialization of untrusted data which can be exploited to remotely execute arbitrary code when combined with a deserialization gadget when listening to untrusted network traffic for log data. This affects Log4j versions up to 1.2 up to 1.2.17.

OnCommand Cloud Manager versions prior to 3.8.0 are susceptible to arbitrary code execution by remote attackers.

Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.

A Polymorphic Typing issue was discovered in FasterXML jackson-databind before 2.9.10. It is related to com.zaxxer.hikari.HikariDataSource. This is a different vulnerability than CVE-2019-14540.

In FreeBSD 12.1-STABLE before r356035, 12.1-RELEASE before 12.1-RELEASE-p4, 11.3-STABLE before r356036, and 11.3-RELEASE before 11.3-RELEASE-p8, incomplete packet data validation may result in memory access after it has been freed leading to a kernel panic or other unpredictable results.

initDocumentParser in xml/XMLSchedulingDataProcessor.java in Terracotta Quartz Scheduler through 2.3.0 allows XXE attacks via a job description.

SubTypeValidator.java in FasterXML jackson-databind before 2.9.9.2 mishandles default typing when ehcache is used (because of net.sf.ehcache.transaction.manager.DefaultTransactionManagerLookup), leading to remote code execution.

Wind River VxWorks has a Buffer Overflow in the TCP component (issue 1 of 4). This is a IPNET security vulnerability: TCP Urgent Pointer = 0 that leads to an integer underflow.

Wind River VxWorks 6.7 though 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 3 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion during connect() to a remote host.

A flaw was found in the Linux kernel. A heap based buffer overflow in mwifiex_uap_parse_tail_ies function in drivers/net/wireless/marvell/mwifiex/ie.c might lead to memory corruption and possibly other consequences.

In order to decrypt SM2 encrypted data an application is expected to call the API function EVP_PKEY_decrypt(). Typically an application will call this function twice. The first time, on entry, the "out" parameter can be NULL and, on exit, the "outlen" parameter is populated with the buffer size required to hold the decrypted plaintext. The application can then allocate a sufficiently sized buffer and call EVP_PKEY_decrypt() again, but this time passing a non-NULL value for the "out" parameter. A bug in the implementation of the SM2 decryption code means that the calculation of the buffer size required to hold the plaintext returned by the first call to EVP_PKEY_decrypt() can be smaller than the actual size required by the second call. This can lead to a buffer overflow when EVP_PKEY_decrypt() is called by the application a second time with a buffer that is too small. A malicious attacker who is able present SM2 content for decryption to an application could cause attacker chosen data to overflow the buffer by up to a maximum of 62 bytes altering the contents of other data held after the buffer, possibly changing application behaviour or causing the application to crash. The location of the buffer is application dependent but is typically heap allocated. Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k).

In Apache Solr versions 5.0.0 to 5.5.5 and 6.0.0 to 6.6.5, the Config API allows to configure the JMX server via an HTTP POST request. By pointing it to a malicious RMI server, an attacker could take advantage of Solr's unsafe deserialization to trigger remote code execution on the Solr side.

An integer overflow in the implementation of the posix_memalign in memalign functions in the GNU C Library (aka glibc or libc6) 2.26 and earlier could cause these functions to return a pointer to a heap area that is too small, potentially leading to heap corruption.

A Vulnerability in Brocade Network Advisor versions before 14.1.0 could allow a remote unauthenticated attacker to execute arbitray code. The vulnerability could also be exploited to execute arbitrary OS Commands.

Buffer overflow in the decodearr function in ntpq in ntp 4.2.8p6 through 4.2.8p10 allows remote attackers to execute arbitrary code by leveraging an ntpq query and sending a response with a crafted array.

All StorageGRID Webscale versions are susceptible to a vulnerability which could permit an unauthenticated attacker to communicate with systems on the same network as the StorageGRID Webscale Admin Node via HTTP or to take over services on the Admin Node.

Zend/zend_hash.c in PHP before 7.0.15 and 7.1.x before 7.1.1 mishandles certain cases that require large array allocations, which allows remote attackers to execute arbitrary code or cause a denial of service (integer overflow, uninitialized memory access, and use of arbitrary destructor function pointers) via crafted serialized data.

A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.

FasterXML jackson-databind 2.0.0 through 2.9.10.2 lacks certain xbean-reflect/JNDI blocking, as demonstrated by org.apache.xbean.propertyeditor.JndiConverter.

This affects the package express-fileupload before 1.1.8. If the parseNested option is enabled, sending a corrupt HTTP request can lead to denial of service or arbitrary code execution.

NetApp FAS 8300/8700 and AFF A400 Baseboard Management Controller (BMC) firmware versions 13.x prior to 13.1P1 were shipped with a default account enabled that could allow unauthorized arbitrary command execution via local access.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in Alfresco Community Edition versions 6.0 and lower. An unauthenticated, remote attacker could authenticate to Alfresco's Solr Web Admin Interface. The vulnerability is due to the presence of a default private key that is present in all default installations. An attacker could exploit this vulnerability by using the extracted private key and bundling it into a PKCS12. A successful exploit could allow the attacker to gain information about the target system (e.g., OS type, system file locations, Java version, Solr version, etc.) as well as the ability to launch further attacks by leveraging the access to Alfresco's Solr Web Admin Interface.

Undocumented Default Cryptographic Key Vulnerability in Cohesity DataPlatform version 6.3 prior 6.3.1g, 6.4 up to 6.4.1c and 6.5.1 through 6.5.1b. The ssh key can provide an attacker access to the linux system in the affected version.

The BluStar component in Mitel InAttend before 2.5 SP3 and CMG before 8.4 SP3 Suite Servers has a default password, which could allow remote attackers to gain unauthorized access and execute arbitrary scripts with potential impacts to the confidentiality, integrity and availability of the system.

An issue was discovered on Tenda AC15 devices. A remote, unauthenticated attacker can make a request to /goform/telnet, creating a telnetd service on the device. This service is password protected; however, several default accounts exist on the device that are root accounts, which can be used to log in.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability.

Router Default Credentials in Kraftway 24F2XG Router firmware version 3.5.30.1118 allow remote attackers to get privileged access to the router.

A vulnerability in Sierra Wireless AirLink GX400, GX440, ES440, and LS300 routers with firmware before 4.4.7 and GX450, ES450, RV50, RV50X, MP70, and MP70E routers with firmware before 4.9.3 could allow an unauthenticated remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges.

Ceragon FibeAir IP-10 wireless radios through 7.2.0 have a default password of mateidu for the mateidu account (a hidden user account established by the vendor). This account can be accessed via both the web interface and SSH. In the web interface, this simply grants an attacker read-only access to the device's settings. However, when using SSH, this gives an attacker access to a Linux shell. NOTE: the vendor has commented "The mateidu user is a known user, which is mentioned in the FibeAir IP-10 User Guide. Customers are instructed to change the mateidu user password. Changing the user password fully solves the vulnerability."

The SD-WAN Orchestrator 3.3.2, 3.4.x, and 4.0.x has default passwords allowing for a Pass-the-Hash Attack. SD-WAN Orchestrator ships with default passwords for predefined accounts which may lead to to a Pass-the-Hash attack.

vsftpd on TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n has a backdoor admin account with the 1234 password, a backdoor guest account with the guest password, and a backdoor test account with the test password.

The previous default setting for Airflow's Experimental API was to allow all API requests without authentication, but this poses security risks to users who miss this fact. From Airflow 1.10.11 the default has been changed to deny all requests by default and is documented at https://airflow.apache.org/docs/1.10.11/security.html#api-authentication. Note this change fixes it for new installs but existing users need to change their config to default `[api]auth_backend = airflow.api.auth.backend.deny_all` as mentioned in the Updating Guide: https://github.com/apache/airflow/blob/1.10.11/UPDATING.md#experimental-api-will-deny-all-request-by-default

An issue was discovered in Schneider Electric Wonderware Historian 2014 R2 SP1 P01 and earlier. Wonderware Historian creates logins with default passwords, which can allow a malicious entity to compromise Historian databases. In some installation scenarios, resources beyond those created by Wonderware Historian may be compromised as well.

The default configuration of broker.conf in Red Hat OpenShift Enterprise 2.x before 2.1 has a password of "mooo" for a Mongo account, which allows remote attackers to hijack the broker by providing this password, related to the openshift.sh script in Openshift Extras before 20130920. NOTE: this may overlap CVE-2013-4253 and CVE-2013-4281.

Lansweeper 6.0.x through 7.2.x has a default installation in which the admin password is configured for the admin account, unless "Built-in admin" is manually unchecked. This allows command execution via the Add New Package and Scheduled Deployments features.

An issue was discovered in Schneider Electric Tableau Server/Desktop Versions 7.0 to 10.1.3 in Wonderware Intelligence Versions 2014R3 and prior. These versions contain a system account that is installed by default. The default system account is difficult to configure with non-default credentials after installation, and changing the default credentials in the embedded Tableau Server is not documented. If Tableau Server is used with Windows integrated security (Active Directory), the software is not vulnerable. However, when Tableau Server is used with local authentication mode, the software is vulnerable. The default system account could be used to gain unauthorized access.

MiR robot controllers (central computation unit) makes use of Ubuntu 16.04.2 an operating system, Thought for desktop uses, this operating system presents insecure defaults for robots. These insecurities include a way for users to escalate their access beyond what they were granted via file creation, access race conditions, insecure home directory configurations and defaults that facilitate Denial of Service (DoS) attacks.

Prima Systems FlexAir devices have Default Credentials.