Flask-AppBuilder is an application development framework, built on top of the Flask web framework. In affected versions there exists a user enumeration vulnerability. This vulnerability allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Users are advised to upgrade to version 3.4.4 as soon as possible. There are no known workarounds for this issue.

Observable Response Discrepancy in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows a remote attacker to gain information about valid usernames by analyzing challenge responses from the server via the REST interface.

ECDSA/EC/Point.pm in Crypt::Perl before 0.33 does not properly consider timing attacks against the EC point multiplication algorithm.

Observable Response Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

ProFTPD 1.2.x, including 1.2.8 and 1.2.10, responds in a different amount of time when a given username exists, which allows remote attackers to identify valid usernames by timing the server response.

IBM i 7.2, 7.3, 7.4, and 7.5 Service Tools Server (SST) is vulnerable to SST user enumeration by a remote attacker. This vulnerability can be used by a malicious actor to gather information about SST users that can be targeted in further attacks. IBM X-Force ID: 287538.

In Logpoint before 7.4.0, an attacker can enumerate a valid list of usernames by using publicly exposed URLs of shared widgets.

A user enumeration vulnerability flaw was found in Venki Supravizio BPM 10.1.2. This issue occurs during password recovery, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

The web mail service in Woppoware PostMaster 4.2.2 (build 3.2.5) generates different error messages depending on whether a user exists or not, which allows remote attackers to determine valid usernames.

Umbraco is an ASP.NET content management system. Umbraco 10 prior to 10.8.4 with access to the native login screen is vulnerable to a possible user enumeration attack. This issue was fixed in version 10.8.5. As a workaround, one may disable the native login screen by exclusively using external logins.

Observable Timing Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

Snipe-IT through 6.0.14 allows attackers to check whether a user account exists because of response variations in a /password/reset request.

Jenkins Generic Webhook Trigger Plugin 1.84.1 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

Jenkins GitLab Plugin 1.5.35 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

An issue was discovered in MediaWiki before 1.35.8, 1.36.x and 1.37.x before 1.37.5, and 1.38.x before 1.38.3. HTMLUserTextField exposes the existence of hidden users.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

A vulnerability in Qlik Sense Enterprise on Windows could allow an remote attacker to enumerate domain user accounts. An attacker could exploit this vulnerability by sending authentication requests to an affected system. A successful exploit could allow the attacker to compare the response time that are returned by the affected system to determine which accounts are valid user accounts. Affected systems are only vulnerable if they have LDAP configured. The affected URI is /internal_forms_authentication/ the response time of the form is longer if the supplied user does not exists and shorter if the user exists.

The authentication method in Laravel 8.x through 9.x before 9.32.0 was discovered to be vulnerable to user enumeration via timeless timing attacks with HTTP/2 multiplexing. This is caused by the early return inside the hasValidCredentials method in the Illuminate\Auth\SessionGuard class when a user is found to not exist.

The RSA and DSA decryption code in Nettle makes it easier for attackers to discover private keys via a cache side channel attack.

Observable Discrepancy in GitHub repository healthchecks/healthchecks prior to v2.6.

OpenCRX before v5.2.2 was discovered to be vulnerable to password enumeration due to the difference in error messages received during a password reset which could enable an attacker to determine if a username, email or ID is valid.

An user enumeration vulnerability was found in SEO Panel 4.10.0. This issue occurs during user authentication, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

vantage6 is a privacy preserving federated learning infrastructure for secure insight exchange. vantage6 does not inform the user of wrong username/password combination if the username actually exists. This is an attempt to prevent bots from obtaining usernames. However, if a wrong password is entered a number of times, the user account is blocked temporarily. This issue has been fixed in version 3.8.0.

Jenkins GitHub Plugin 1.34.4 and earlier uses a non-constant time comparison function when checking whether the provided and computed webhook signatures are equal, allowing attackers to use statistical methods to obtain a valid webhook signature.

TYPO3 is an open source PHP based web content management system released under the GNU GPL. It has been discovered that observing response time during user authentication (backend and frontend) can be used to distinguish between existing and non-existing user accounts. Extension authors of 3rd party TYPO3 extensions providing a custom authentication service should check if the extension is affected by the described problem. Affected extensions must implement new `MimicServiceInterface::mimicAuthUser`, which simulates corresponding times regular processing would usually take. Update to TYPO3 version 7.6.58 ELTS, 8.7.48 ELTS, 9.5.37 ELTS, 10.4.32 or 11.5.16 that fix this problem. There are no known workarounds for this issue.

In Jenkins 2.355 and earlier, LTS 2.332.3 and earlier, an observable timing discrepancy on the login form allows distinguishing between login attempts with an invalid username, and login attempts with a valid username and wrong password, when using the Jenkins user database security realm.

Observable Discrepancy in Packagist snipe/snipe-it prior to v5.3.9.

An issue was discovered in eZ Publish Ibexa Kernel before 7.5.15.1. The /user/sessions endpoint can be abused to determine account existence.

Due to improper authentication mechanism an unauthenticated remote attacker can enumerate valid usernames.

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the password recovery procedure for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

A vulnerability, which was classified as problematic, was found in viafintech Barzahlen Payment Module PHP SDK up to 2.0.0. Affected is the function verify of the file src/Webhook.php. The manipulation leads to observable timing discrepancy. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 2.0.1 is able to address this issue. The patch is identified as 3e7d29dc0ca6c054a6d6e211f32dae89078594c1. It is recommended to upgrade the affected component. VDB-217650 is the identifier assigned to this vulnerability.

Thinfinity VirtualUI before 3.0 allows a malicious actor to enumerate users registered in the OS (Windows) through the /changePassword URI. By accessing the vector, an attacker can determine if a username exists thanks to the message returned; it can be presented in different languages according to the configuration of VirtualUI. Common users are administrator, admin, guest and krgtbt.

wolfSSL 4.3.0 has mulmod code in wc_ecc_mulmod_ex in ecc.c that does not properly resist timing side-channel attacks.

The Page Restriction WordPress (WP) – Protect WP Pages/Post plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.3.6 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to higher-level roles such as administrator.

A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i801, RUGGEDCOM i802, RUGGEDCOM i803, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM RMC30, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RP110, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600T, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS401, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000H, RUGGEDCOM RS8000T, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900L, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS969, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSL910, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. A timing attack, in a third-party component, could make the retrieval of the private key possible, used for encryption of sensitive data. If a threat actor were to exploit this, the data integrity and security could be compromised.

IBM Guardium Data Encryption (GDE) 5.0.0.2 behaves differently or sends different responses under different circumstances in a way that is observable to an unauthorized actor, which could facilitate username enumeration. IBM X-Force ID: 213856.

Best Practical Request Tracker (RT) 4.2 before 4.2.17, 4.4 before 4.4.5, and 5.0 before 5.0.2 allows sensitive information disclosure via a timing attack against lib/RT/REST2/Middleware/Auth.pm.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 authentication process response indicates and validates the existence of a username. This may allow an attacker to enumerate different user accounts.

Pimcore is an open source data & experience management platform. In versions prior to 10.1.3, it is possible to enumerate usernames via the forgot password functionality. This issue is fixed in version 10.1.3. As a workaround, one may apply the available patch manually.

Meow hash 0.5/calico does not sufficiently thwart key recovery by an attacker who can query whether there's a collision in the bottom bits of the hashes of two messages, as demonstrated by an attack against a long-running web service that allows the attacker to infer collisions by measuring timing differences.

Using iterative requests an attacker was able to learn the size of an opaque response, as well as the contents of a server-supplied Vary header. This vulnerability affects Firefox < 119.

Under certain circumstances a CCURE Portal user could enumerate user accounts in CCURE 9000 version 2.90 and prior versions.

In mymbCONNECT24, mbCONNECT24 <= 2.9.0 an unauthenticated user can enumerate valid backend users by checking what kind of response the server sends for crafted invalid login attempts.

In MB connect line mymbCONNECT24, mbCONNECT24 in versions <= 2.8.0 an unauthenticated user can enumerate valid users by checking what kind of response the server sends.