FreePBX, when restapps (aka Rest Phone Apps) 15.0.19.87, 15.0.19.88, 16.0.18.40, or 16.0.18.41 is installed, allows remote attackers to execute arbitrary code, as exploited in the wild in December 2021. The fixed versions are 15.0.20 and 16.0.19.

FreePBX is an open source IP PBX. From 15.0.42 to before 16.0.45 and 17.0.7, unauthenticated users may be able to access the User Control Panel (UCP) using hard-coded initial template credentials if these were not immediately changed by the Administrator who enabled UCP. Authenticated access to ACP is required for the initial setup of UCP generic templates, but after that, without further steps by the admin, unauthenticated users may be able to gain access. This vulnerability is fixed in 16.0.45 and 17.0.7.

FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. Versions are vulnerable to authentication bypass when the authentication type is set to "webserver." When providing an Authorization header with an arbitrary value, a session is associated with the target user regardless of valid credentials. This issue is fixed in versions 16.0.44 and 17.0.23.

Sangoma FreePBX 115.0.16.26 and below, 14.0.13.11 and below, 13.0.197.13 and below have Incorrect Access Control.

The Sangoma Session Border Controller (SBC) 2.3.23-119 GA web interface is vulnerable to an authentication bypass via an argument injection vulnerability involving special characters in the username field. Upon successful exploitation, a remote unauthenticated user can login into the device's admin web portal without providing any credentials. This affects /var/webconfig/gui/Webconfig.inc.php.

The Sangoma Session Border Controller (SBC) 2.3.23-119 GA web interface is vulnerable to Argument Injection via special characters in the username field. Upon successful exploitation, a remote unauthenticated user can create a local system user with sudo privileges, and use that user to login to the system (either via the web interface or via SSH) to achieve complete compromise of the device. This affects /var/webconfig/gui/Webconfig.inc.php and /usr/local/sng/bin/sng-user-mgmt.

FreePBX is an open-source web-based graphical user interface. FreePBX 15, 16, and 17 endpoints are vulnerable due to insufficiently sanitized user-supplied data allowing unauthenticated access to FreePBX Administrator leading to arbitrary database manipulation and remote code execution. This issue has been patched in endpoint versions 15.0.66, 16.0.89, and 17.0.3.

A buffer overflow in the the Sangoma IMG2020 HTTP server through 2.3.9.6 allows an unauthenticated user to achieve remote code execution.

A vulnerability was found in FreePBX cdr 14.0. It has been classified as critical. This affects the function ajaxHandler of the file ucp/Cdr.class.php. The manipulation of the argument limit/offset leads to sql injection. Upgrading to version 14.0.5.21 is able to address this issue. The name of the patch is f1a9eea2dfff30fb99d825bac194a676a82b9ec8. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-216771.

admin/libraries/view.functions.php in FreePBX 2.9 before 2.9.0.14, 2.10 before 2.10.1.15, 2.11 before 2.11.0.23, and 12 before 12.0.1alpha22 does not restrict the set of functions accessible to the API handler, which allows remote attackers to execute arbitrary PHP code via the function and args parameters to admin/config.php.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In affected versions if the incoming STUN message contains an ERROR-CODE attribute, the header length is not checked before performing a subtraction operation, potentially resulting in an integer underflow scenario. This issue affects all users that use STUN. A malicious actor located within the victim’s network may forge and send a specially crafted UDP (STUN) message that could remotely execute arbitrary code on the victim’s machine. Users are advised to upgrade as soon as possible. There are no known workarounds.

The callme_startcall function in recordings/misc/callme_page.php in FreePBX 2.9, 2.10, and earlier allows remote attackers to execute arbitrary commands via the callmenum parameter in a c action.

Sangoma NetBorder / Vega Session Controller before 2.3.12-80-GA allows remote attackers to execute arbitrary commands via the web interface.

Insecure Permissions vulnerability in asterisk v22 allows a remote attacker to execute arbitrary code via the action_createconfig function. NOTE: this is disputed by the Supplier because the impact is limited to creating empty files outside of the Asterisk product directory (aka directory traversal) and the attack can only be performed by a privileged user who has the ability to manage the configuration.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In versions up to and including 2.11.1 when in a dialog set (or forking) scenario, a hash key shared by multiple UAC dialogs can potentially be prematurely freed when one of the dialogs is destroyed . The issue may cause a dialog set to be registered in the hash table multiple times (with different hash keys) leading to undefined behavior such as dialog list collision which eventually leading to endless loop. A patch is available in commit db3235953baa56d2fb0e276ca510fefca751643f which will be included in the next release. There are no known workarounds for this issue.

RE11S v1.11 was discovered to contain a command injection vulnerability via the component /goform/formAccept.

A vulnerability was identified in Vaelsys VaelsysV4 up to 5.1.0/5.4.0. Affected by this issue is the function execute_DataObjectProc of the file /grid/vgrid_server.php of the component Web interface. Such manipulation of the argument xajaxargs leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. Upgrading to version 5.1.1 and 5.4.1 can resolve this issue. It is suggested to upgrade the affected component.

There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. A Huawei printer has a system command injection vulnerability. Successful exploitation could lead to remote code execution.

An issue in symphony v.3.6.3 and before allows a remote attacker to execute arbitrary code via the log4j component.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, EAX20 before 1.0.0.58, EAX80 before 1.0.1.68, EX7500 before 1.0.0.74, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, R6400 before 1.0.1.70, R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.116, R7000P before 1.3.3.140, R7850 before 1.0.5.68, R7900 before 1.0.4.38, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.68, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, XR1000 before 1.0.0.58, and XR300 before 1.0.3.68.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, EAX20 before 1.0.0.48, EAX80 before 1.0.1.64, EX7500 before 1.0.0.72, R6400 before 1.0.1.68, R6900P before 1.3.2.132, R7000 before 1.0.11.116, R7000P before 1.3.2.132, R7900 before 1.0.4.38, R7960P before 1.4.1.66, R8000 before 1.0.4.66, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, MK62 before 1.0.6.110, MR60 before 1.0.6.110, R6400v2 before 1.0.4.106, R8000P before 1.4.1.66, RAX20 before 1.0.2.64, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, MS60 before 1.0.6.110, R6700v3 before 1.0.4.106, R7900P before 1.4.1.66, RAX15 before 1.0.2.64, RAX50 before 1.0.2.82, RAX75 before 1.0.3.106, RBR750 before 3.2.16.22, RBR850 before 3.2.16.22, RBS750 before 3.2.16.22, RBS850 before 3.2.16.22, RBK752 before 3.2.16.22, and RBK852 before 3.2.16.22.

A command injection vulnerability has been identified in Atos Unify OpenScape 4000 Assistant and Unify OpenScape 4000 Manager (8 before R2.22.18, 10 before 0.28.13, and 10 R1 before R1.34.4) that may allow an unauthenticated attacker to upload arbitrary files and achieve administrative access to the system.

Nanoleaf Desktop App before v1.3.1 was discovered to contain a command injection vulnerability which is exploited via a crafted HTTP request.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Software Foundation Apache Airflow Hive Provider.This issue affects Apache Airflow Hive Provider: before 5.0.0.

NETIS SYSTEMS MW5360 V1.0.1.3031 was discovered to contain a command injection vulnerability via the password parameter on the login page.

TOTOLINK_A3700R_V9.1.2u.6165_20211012has a command Injection vulnerability via setOpModeCfg

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setScheduleCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument mode can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.

xterm before 375 allows code execution via font ops, e.g., because an OSC 50 response may have Ctrl-g and therefore lead to command execution within the vi line-editing mode of Zsh. NOTE: font ops are not allowed in the xterm default configurations of some Linux distributions.

Diagnosis Controller miss parameter validation, so user may attacked by command injection via HTTP Request.

lib/cmd.js in the node-windows package before 1.0.0-beta.6 for Node.js allows command injection via the PID parameter.

D-Link DIR-3040 device with firmware 120B03 was discovered to contain a command injection vulnerability via the SetTriggerLEDBlink function.

Alarm instance management has command injection when there is a specific command configured. It is only for logged-in users. We recommend you upgrade to version 2.0.6 or higher

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setWiFiAdvancedCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument bgProtection results in os command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

IP-COM EW9 V15.11.0.14(9732) was discovered to contain a command injection vulnerability in the formSetDebugCfg function.

There is a command injection vulnerability in the ssdpcgi_main function of cgibin binary in D-Link DIR-815 router firmware v1.04.

A command injection vulnerability exists in Jitsi before commit 8aa7be58522f4264078d54752aae5483bfd854b2 when launching browsers on Windows which could allow an attacker to insert an arbitrary URL which opens up the opportunity to remote execution.

A Heap Overflow vulnerability in WLInfoRailService component of Ivanti Avalanche before 6.4.3 allows a remote unauthenticated attacker to execute arbitrary commands

A vulnerability has been found in Teledyne FLIR AX8 up to 1.46.16. Affected by this issue is some unknown functionality of the file palette.php of the component Web Service Handler. The manipulation of the argument palette leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.49.16 can resolve this issue. Upgrading the affected component is advised. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

A security vulnerability has been detected in Totolink A8000RU 7.1cu.643_b20200521. Affected by this vulnerability is the function setFirewallType of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. The manipulation of the argument firewallType leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

There is a command injection vulnerability using environment variables in Bitbucket Server and Data Center. An attacker with permission to control their username can exploit this issue to execute arbitrary code on the system. This vulnerability can be unauthenticated if the Bitbucket Server and Data Center instance has enabled “Allow public signup”.

A vulnerability, which was classified as critical, was found in LB-LINK AC1900 Router 1.0.2. Affected is the function websGetVar of the file /goform/set_manpwd. The manipulation of the argument routepwd  leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used.

D-Link DIR-823G v1.0.2 was found to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via a crafted packet.

A vulnerability was identified in Shiguangwu sgwbox N3 2.0.25. This impacts an unknown function of the file /usr/sbin/http_eshell_server of the component NETREBOOT Interface. Such manipulation leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setOpenVpnClientCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument enabled can lead to os command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.

Advantech iView, versions 5.6 and prior, has an improper neutralization of special elements used in a command (“command injection”) vulnerability. Successful exploitation of this vulnerability may allow an attacker to send a HTTP GET or POST request that creates a command string without any validation. The attacker may then remotely execute code.

Versions of the package network before 0.7.0 are vulnerable to Arbitrary Command Injection due to use of the child_process exec function without input sanitization. If (attacker-controlled) user input is given to the mac_address_for function of the package, it is possible for the attacker to execute arbitrary commands on the operating system that this package is being run on.

A vulnerability was detected in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument HTTP results in os command injection. The attack may be launched remotely. The exploit is now public and may be used.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setPptpServerCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument enable causes os command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized.