An issue was discovered in Treck IPv6 before 6.0.1.68. Improper Input Validation in the IPv6 component allows an unauthenticated remote attacker to cause an Out of Bounds Write, and possibly a Denial of Service via network access.

A heap-based buffer overflow in the Treck HTTP Server component before 6.0.1.68 allows remote attackers to cause a denial of service (crash/reset) or to possibly execute arbitrary code.

The Treck TCP/IP stack before 6.0.1.66 has an IPv6OverIPv4 tunneling Out-of-bounds Read.

The Treck TCP/IP stack before 6.0.1.66 allows Remote Code Execution, related to IPv4 tunneling.

The Treck TCP/IP stack before 6.0.1.66 allows Remote Code execution via a single invalid DNS response.

The Treck TCP/IP stack before 5.0.1.35 has an Out-of-Bounds Write via multiple malformed IPv6 packets.

An issue was discovered in the client side of Zoho ManageEngine Desktop Central 10.0.552.W. An attacker-controlled server can trigger an integer overflow in InternetSendRequestEx and InternetSendRequestByBitrate that leads to a heap-based buffer overflow and Remote Code Execution with SYSTEM privileges. This issue will occur only when untrusted communication is initiated with server. In cloud, Agent will always connect with trusted communication.

In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger writes outside of bounds of heap allocated buffers by inserting negative elements in the segment ids tensor. Users having access to `segment_ids_data` can alter `output_index` and then write to outside of `output_data` buffer. This might result in a segmentation fault but it can also be used to further corrupt the memory and can be chained with other vulnerabilities to create more advanced exploits. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that the segment ids are all positive, although this only handles the case when the segment ids are stored statically in the model. A similar validation could be done if the segment ids are generated at runtime between inference steps. If the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code.

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

Integer overflow in rgbimgmodule.c in the rgbimg module in Python 2.5 allows remote attackers to have an unspecified impact via a large image that triggers a buffer overflow. NOTE: this vulnerability exists because of an incomplete fix for CVE-2008-3143.12.

In nDPI through 3.2, there is a stack overflow in extractRDNSequence in lib/protocols/tls.c.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `data_splits` argument of `tf.raw_ops.StringNGrams` lacks validation. This allows a user to pass values that can cause heap overflow errors and even leak contents of memory In the linked code snippet, all the binary strings after `ee ff` are contents from the memory stack. Since these can contain return addresses, this data leak can be used to defeat ASLR. The issue is patched in commit 0462de5b544ed4731aa2fb23946ac22c01856b80, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

mruby through 2.1.2-rc has a heap-based buffer overflow in the mrb_yield_with_class function in vm.c because of incorrect VM stack handling. It can be triggered via the stack_copy function.

In msm_ispif_config_stereo() in Android for MSM, Firefox OS for MSM, and QRD Android before 2017-06-21, the parameter params->entries[i].vfe_intf comes from userspace without any bounds check which could potentially result in a kernel out-of-bounds write.

Mozilla developers and community members reported memory safety bugs present in Firefox 81 and Firefox ESR 78.3. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox ESR < 78.4, Firefox < 82, and Thunderbird < 78.4.

A memory corruption issue was found in Artifex Ghostscript 9.50 and 9.52. Use of a non-standard PostScript operator can allow overriding of file access controls. The 'rsearch' calculation for the 'post' size resulted in a size that was too large, and could underflow to max uint32_t. This was fixed in commit 5d499272b95a6b890a1397e11d20937de000d31b.

Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine. The `concat` built-in can write over the bounds of the memory buffer that was allocated for it and thus overwrite existing valid data. The root cause is that the `build_IR` for `concat` doesn't properly adhere to the API of copy functions (for `>=0.3.2` the `copy_bytes` function). A contract search was performed and no vulnerable contracts were found in production. The buffer overflow can result in the change of semantics of the contract. The overflow is length-dependent and thus it might go unnoticed during contract testing. However, certainly not all usages of concat will result in overwritten valid data as we require it to be in an internal function and close to the return statement where other memory allocations don't occur. This issue has been addressed in 0.4.0.

Integer Overflow or Wraparound vulnerability in the XML RPC library of OpenRobotics ros_comm communications packages allows unauthenticated network traffic to cause unexpected behavior. This issue affects: OpenRobotics ros_comm communications packages Noetic and prior versions. Fixed in https://github.com/ros/ros_comm/pull/2065.

Multiple stack-based buffer overflows in the CertDecoder::GetName function in src/asn.cpp in TaoCrypt in yaSSL before 1.9.9, as used in mysqld in MySQL 5.0.x before 5.0.90, MySQL 5.1.x before 5.1.43, MySQL 5.5.x through 5.5.0-m2, and other products, allow remote attackers to execute arbitrary code or cause a denial of service (memory corruption and daemon crash) by establishing an SSL connection and sending an X.509 client certificate with a crafted name field, as demonstrated by mysql_overflow1.py and the vd_mysql5 module in VulnDisco Pack Professional 8.11. NOTE: this was originally reported for MySQL 5.0.51a.

Dnsmasq 2.86 has a heap-based buffer overflow in print_mac (called from log_packet and dhcp_reply). NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge.

A memory corruption vulnerability is present in bspatch as shipped in Colin Percival’s bsdiff tools version 4.3. Insufficient checks when handling external inputs allows an attacker to bypass the sanity checks in place and write out of a dynamically allocated buffer boundaries.

xorg-x11-server before 1.19.5 was vulnerable to integer overflow in ProcDbeGetVisualInfo function allowing malicious X client to cause X server to crash or possibly execute arbitrary code.

Memory safety bugs present in Thunderbird ESR 140.10.0 and Thunderbird 150.0.0. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150.0.1, Firefox ESR 140.10.1, Thunderbird 150.0.1, and Thunderbird 140.10.1.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address.

An issue was discovered in map.c in FreedroidRPG 1.0rc2. It assumes lengths of data sets read from saved game files. It copies data from a file into a fixed-size heap-allocated buffer without size verification, leading to a heap-based buffer overflow.

Buffer underflow in src/http/ngx_http_parse.c in nginx 0.1.0 through 0.5.37, 0.6.x before 0.6.39, 0.7.x before 0.7.62, and 0.8.x before 0.8.15 allows remote attackers to execute arbitrary code via crafted HTTP requests.

The snmp_pdu_parse function in snmp_api.c in net-snmp 5.7.2 and earlier does not remove the varBind variable in a netsnmp_variable_list item when parsing of the SNMP PDU fails, which allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a crafted packet.

Stack-based buffer overflow vulnerability in Vigor3900, Vigor2960, and Vigor300B with firmware before 1.5.1.1.

Softing Industrial Automation all versions prior to the latest build of version 4.47.0, The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute arbitrary code.

Malicious operation of the crafted web browser cookie may cause a stack-based buffer overflow in the system web server on the EDR-G902 and EDR-G903 Series Routers (versions prior to 5.4).

A stack-based buffer overflow in DMitry (Deepmagic Information Gathering Tool) 1.3a might allow remote WHOIS servers to execute arbitrary code via a long line in a response that is mishandled by nic_format_buff.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. Functions parsing the OIDs in SNMP requests lack sufficient allocated target-buffer capacity verification when writing parsed OID values. The function snmp_oid_decode_oid() may overwrite memory areas beyond the provided target buffer, when called from snmp_message_decode() upon an SNMP request reception. Because the content of the write operations is externally provided in the SNMP requests, it enables a remote overwrite of an IoT device's memory regions beyond the allocated buffer. This overflow may allow remote overwrite of stack and statically allocated variables memory regions by sending a crafted SNMP request.

A stack-based buffer overflow on DrayTek Vigor2960, Vigor3900, and Vigor300B devices before 1.5.1.1 allows remote attackers to execute arbitrary code via the formuserphonenumber parameter in an authusersms action to mainfunction.cgi.

Multiple integer overflows in FreeType 2.3.9 and earlier allow remote attackers to execute arbitrary code via vectors related to large values in certain inputs in (1) smooth/ftsmooth.c, (2) sfnt/ttcmap.c, and (3) cff/cffload.c.

An out-of-bounds write vulnerability exists in the Gaussian format orientation functionality of Open Babel 3.1.1 and master commit 530dbfa3. A specially crafted malformed file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

An out-of-bounds write vulnerability exists in the Ethernet/IP server functionality of EIP Stack Group OpENer 2.3 and development commit 8c73bf3. A specially crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability classified as critical was found in Axiomatic Bento4. Affected by this vulnerability is an unknown functionality of the file AvcInfo.cpp of the component avcinfo. The manipulation leads to heap-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-212005 was assigned to this vulnerability.

A vulnerability was found in Axiomatic Bento4. It has been classified as critical. Affected is the function WriteSample of the component mp42hevc. The manipulation leads to heap-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-212010 is the identifier assigned to this vulnerability.

Morita Shogi 64 through 2020-05-02 for Nintendo 64 devices allows remote attackers to execute arbitrary code via crafted packet data to the built-in modem because 0x800b3e94 (aka the IF subcommand to top-level command 7) has a stack-based buffer overflow.

An issue was discovered in janus-gateway (aka Janus WebRTC Server) through 0.10.0. janus_sdp_merge in sdp.c has a stack-based buffer overflow.

A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

In Morgan Stanley Hobbes through 2020-05-21, the array implementation lacks bounds checking, allowing exploitation of an out-of-bounds (OOB) read/write vulnerability that leads to both local and remote code (via RPC) execution.

In MiniShare before 1.4.2, there is a stack-based buffer overflow via an HTTP PUT request, which allows an attacker to achieve arbitrary code execution, a similar issue to CVE-2018-19861, CVE-2018-19862, and CVE-2019-17601. NOTE: this product is discontinued.

U.S. Air Force Sensor Data Management System extract75 has a buffer overflow that leads to code execution. An overflow in a global variable (sBuffer) leads to a Write-What-Where outcome. Writing beyond sBuffer will clobber most global variables until reaching a pointer such as DES_info or image_info. By controlling that pointer, one achieves an arbitrary write when its fields are assigned. The data written is from a potentially untrusted NITF file in the form of an integer. The attacker can gain control of the instruction pointer.

md2roff 1.7 has a stack-based buffer overflow via a Markdown file containing a large number of consecutive characters to be processed. NOTE: the vendor's position is that the product is not intended for untrusted input

A heap-based buffer overflow in Fortinet FortiAnalyzer version 7.4.0 through 7.4.2, 7.2.0 through 7.2.5, 7.0.0 through 7.0.12, 6.4.0 through 6.4.14, FortiManager version 7.4.0 through 7.4.2, 7.2.0 through 7.2.5, 7.0.0 through 7.0.12, 6.4.0 through 6.4.14 allows attacker to escalation of privilege via specially crafted http requests

A code execution vulnerability exists in the WS-Addressing plugin functionality of Genivia gSOAP 2.8.107. A specially crafted SOAP request can lead to remote code execution. An attacker can send an HTTP request to trigger this vulnerability.