vyper is a Pythonic Smart Contract Language for the EVM. Multiple evaluation of a single expression is possible in the iterator target of a for loop. While the iterator expression cannot produce multiple writes, it can consume side effects produced in the loop body (e.g. read a storage variable updated in the loop body) and thus lead to unexpected program behavior. Specifically, reads in iterators which contain an ifexp (e.g. `for s: uint256 in ([read(), read()] if True else [])`) may interleave reads with writes in the loop body. Vyper for loops allow two kinds of iterator targets, namely the `range()` builtin and an iterable type, like SArray and DArray. During codegen, iterable lists are required to not produce any side-effects (in the following code, `range_scope` forces `iter_list` to be parsed in a constant context, which is checked against `is_constant`). However, this does not prevent the iterator from consuming side effects provided by the body of the loop. For SArrays on the other hand, `iter_list` is instantiated in the body of a `repeat` ir, so it can be evaluated several times. This issue is being addressed and is expected to be available in version 0.4.1. Users are advised to upgrade as soon as the patched release is available. There are no known workarounds for this vulnerability.

Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Apache Tomcat when using the APR/Native connector. This was particularly noticeable with client initiated closes of HTTP/2 connections. This issue affects Apache Tomcat: from 9.0.0.M1 through 9.0.106. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 through 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 9.0.107, which fixes the issue.

An exploitable denial-of-service vulnerability exists in the XML_UploadFile Wi-Fi command of the NT9665X Chipset firmware, running on the Anker Roav A1 Dashcam, version RoavA1SWV1.9. A specially crafted packet can cause a semaphore deadlock, which prevents the device from receiving any physical or network inputs. An attacker can send a specially crafted packet to trigger this vulnerability.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr If multiple connection requests attempt to create an implicit mptcp endpoint in parallel, more than one caller may end up in mptcp_pm_nl_append_new_local_addr because none found the address in local_addr_list during their call to mptcp_pm_nl_get_local_id. In this case, the concurrent new_local_addr calls may delete the address entry created by the previous caller. These deletes use synchronize_rcu, but this is not permitted in some of the contexts where this function may be called. During packet recv, the caller may be in a rcu read critical section and have preemption disabled. An example stack: BUG: scheduling while atomic: swapper/2/0/0x00000302 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) dump_stack (lib/dump_stack.c:124) __schedule_bug (kernel/sched/core.c:5943) schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970) __schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621) schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818) schedule_timeout (kernel/time/timer.c:2160) wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148) __wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444) synchronize_rcu (kernel/rcu/tree.c:3609) mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061) mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164) mptcp_pm_get_local_id (net/mptcp/pm.c:420) subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213) subflow_v4_route_req (net/mptcp/subflow.c:305) tcp_conn_request (net/ipv4/tcp_input.c:7216) subflow_v4_conn_request (net/mptcp/subflow.c:651) tcp_rcv_state_process (net/ipv4/tcp_input.c:6709) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1)) ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234) ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254) ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580) ip_sublist_rcv (net/ipv4/ip_input.c:640) ip_list_rcv (net/ipv4/ip_input.c:675) __netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631) netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774) napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114) igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb __napi_poll (net/core/dev.c:6582) net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787) handle_softirqs (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636) irq_exit_rcu (kernel/softirq.c:651) common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14)) </IRQ> This problem seems particularly prevalent if the user advertises an endpoint that has a different external vs internal address. In the case where the external address is advertised and multiple connections already exist, multiple subflow SYNs arrive in parallel which tends to trigger the race during creation of the first local_addr_list entries which have the internal address instead. Fix by skipping the replacement of an existing implicit local address if called via mptcp_pm_nl_get_local_id.

Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk prior to versions 18.20.1, 20.5.1, and 21.0.1; as well as certified-asterisk prior to 18.9-cert6; Asterisk is susceptible to a DoS due to a race condition in the hello handshake phase of the DTLS protocol when handling DTLS-SRTP for media setup. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable Asterisk servers for calls that rely on DTLS-SRTP. Commit d7d7764cb07c8a1872804321302ef93bf62cba05 contains a fix, which is part of versions 18.20.1, 20.5.1, 21.0.1, amd 18.9-cert6.

A vulnerability was found in Undertow where the ProxyProtocolReadListener reuses the same StringBuilder instance across multiple requests. This issue occurs when the parseProxyProtocolV1 method processes multiple requests on the same HTTP connection. As a result, different requests may share the same StringBuilder instance, potentially leading to information leakage between requests or responses. In some cases, a value from a previous request or response may be erroneously reused, which could lead to unintended data exposure. This issue primarily results in errors and connection termination but creates a risk of data leakage in multi-request environments.

An issue was discovered in Mitsubishi Electric Automation MELSEC-Q series Ethernet interface modules QJ71E71-100, all versions, QJ71E71-B5, all versions, and QJ71E71-B2, all versions. The affected Ethernet interface module is connected to a MELSEC-Q PLC, which may allow a remote attacker to connect to the PLC via Port 5002/TCP and cause a denial of service, requiring the PLC to be reset to resume operation. This is caused by an Unrestricted Externally Accessible Lock.

emp3r0r is a C2 designed by Linux users for Linux environments. Prior to version 3.21.2, multiple shared maps are accessed without consistent synchronization across goroutines. Under concurrent activity, Go runtime can trigger `fatal error: concurrent map read and map write`, causing C2 process crash (availability loss). Version 3.21.2 fixes this issue.

Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, ParameterAnalysis in pkg/scanning/parameterAnalysis.go runs two sequential worker stages that both write to the same results channel. The channel is correctly closed after the first stage completes (close(results) at line 438), but the second stage — which processes POST-body parameters (dp) — is then launched with the same already-closed channel as its output. When a scanned parameter is reflected, processParams executes results <- paramResult on the closed channel, triggering a Go runtime panic that crashes the entire dalfox process. In server mode, the crash is remotely triggerable by any unauthenticated caller who can reach the REST API, because the default configuration has no API key and the second stage activates whenever options.Data != "" (i.e., the attacker supplies the data field) and the target reflects at least one parameter. This vulnerability is fixed in 2.13.0.

The process_packet function in ntp_proto.c in ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (peer-variable modification) by sending spoofed packets from many source IP addresses in a certain scenario, as demonstrated by triggering an incorrect leap indication.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. In versions 2023.01 and prior, an attacker can send multiple crafted frames to the device to trigger a race condition. The race condition invalidates assumptions about the program state and leads to an invalid memory access resulting in denial of service. This issue is patched in pull request 19679. There are no known workarounds.

Grafana is an open-source platform for monitoring and observability. Using public dashboards users can query multiple distinct data sources using mixed queries. However such query has a possibility of crashing a Grafana instance. The only feature that uses mixed queries at the moment is public dashboards, but it's also possible to cause this by calling the query API directly. This might enable malicious users to crash Grafana instances through that endpoint. Users may upgrade to version 9.4.12 and 9.5.3 to receive a fix.

Gotenberg is a Docker-powered stateless API for PDF files. Prior to 8.32.0, the webhook middleware spawns a goroutine that holds a reference to the request's echo.Context after the synchronous handler returns ErrAsyncProcess and Echo recycles the context back to its sync.Pool. When a concurrent request claims the recycled context, c.Reset() clears the store. If the webhook goroutine reaches hardTimeoutMiddleware at that moment, an unchecked type assertion on a nil store entry panics outside any recover() scope, crashing the Gotenberg process. Any anonymous caller reaches the webhook path (default webhook-deny-list filters only the webhook destination, not the submitter). A single-source stress of ~24 webhook requests plus ~60 GET /version requests crashes the process in about two seconds. This vulnerability is fixed in 8.32.0.

Signal Handler Race Condition vulnerability in Mitsubishi Electric India GC-ENET-COM whose first 2 digits of 11-digit serial number of unit are "16" allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition in Ethernet communication by sending a large number of specially crafted packets to any UDP port when GC-ENET-COM is configured as a Modbus TCP Server. The communication resumes only when the power of the main unit is turned off and on or when the GC-ENET-COM is hot-swapped from the main unit.

Undefined behavior may result due to a race condition leading to a use-after-free violation. If BIND receives an incoming DNS message signed with SIG(0), it begins work to validate that signature. If, during that validation, the "recursive-clients" limit is reached (as would occur during a query flood), and that same DNS message is discarded per the limit, there is a brief window of time while the SIG(0) validation may attempt to read the now-discarded DNS message. This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1. BIND 9 versions 9.18.28 through 9.18.49 and 9.18.28-S1 through 9.18.49-S1 are NOT affected.

Race condition vulnerability in the event notification module. Impact: Successful exploitation of this vulnerability may affect availability.

UAF vulnerability in the communication module. Impact: Successful exploitation of this vulnerability may affect availability.

A race condition was addressed with additional validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, watchOS 26.5. An app may be able to cause unexpected system termination.

OliveTin gives access to predefined shell commands from a web interface. Prior to version 3000.10.3, an unauthenticated denial-of-service vulnerability exists in OliveTin’s OAuth2 login flow. Concurrent requests to /oauth/login can trigger unsynchronized access to a shared registeredStates map, causing a Go runtime panic (fatal error: concurrent map writes) and process termination. This allows remote attackers to crash the service when OAuth2 is enabled. This issue has been patched in version 3000.10.3.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race condition during IPSec ESN update In IPSec full offload mode, the device reports an ESN (Extended Sequence Number) wrap event to the driver. The driver validates this event by querying the IPSec ASO and checking that the esn_event_arm field is 0x0, which indicates an event has occurred. After handling the event, the driver must re-arm the context by setting esn_event_arm back to 0x1. A race condition exists in this handling path. After validating the event, the driver calls mlx5_accel_esp_modify_xfrm() to update the kernel's xfrm state. This function temporarily releases and re-acquires the xfrm state lock. So, need to acknowledge the event first by setting esn_event_arm to 0x1. This prevents the driver from reprocessing the same ESN update if the hardware sends events for other reason. Since the next ESN update only occurs after nearly 2^31 packets are received, there's no risk of missing an update, as it will happen long after this handling has finished. Processing the event twice causes the ESN high-order bits (esn_msb) to be incremented incorrectly. The driver then programs the hardware with this invalid ESN state, which leads to anti-replay failures and a complete halt of IPSec traffic. Fix this by re-arming the ESN event immediately after it is validated, before calling mlx5_accel_esp_modify_xfrm(). This ensures that any spurious, duplicate events are correctly ignored, closing the race window.

In Phoenix Contact FL SWITCH SMCS series products in multiple versions if an attacker sends a hand-crafted TCP-Packet with the Urgent-Flag set and the Urgent-Pointer set to 0, the network stack will crash. The device needs to be rebooted afterwards.

Missing synchronization vulnerability in GOT2000 series GT27 model communication driver versions 01.19.000 through 01.39.010, GT25 model communication driver versions 01.19.000 through 01.39.010 and GT23 model communication driver versions 01.19.000 through 01.39.010 and GT SoftGOT2000 versions 1.170C through 1.256S allows a remote unauthenticated attacker to cause DoS condition on the MODBUS/TCP slave communication function of the products by rapidly and repeatedly connecting and disconnecting to and from the MODBUS/TCP communication port on a target. Restart or reset is required to recover.

alf.io is an open source ticket reservation system for conferences, trade shows, workshops, and meetups. Prior to version 2.0-M5, a race condition allows the user to bypass the limit on the number of promo codes and use the discount coupon multiple times. In "alf.io", an event organizer can apply price discounts by using promo codes to your events. The organizer can limit the number of promo codes that will be used for this, but the time-gap between checking the number of codes and restricting the use of the codes allows a threat actor to bypass the promo code limit. Version 2.0-M5 fixes this issue.

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are two issues related to the mapping of pages belonging to other domains: For one, an assertion is wrong there, where the case actually needs handling. A NULL pointer de-reference could result on a release build. This is CVE-2025-58144. And then the P2M lock isn't held until a page reference was actually obtained (or the attempt to do so has failed). Otherwise the page can not only change type, but even ownership in between, thus allowing domain boundaries to be violated. This is CVE-2025-58145.

On PTX Series and QFX10k Series devices with the "inline-jflow" feature enabled, a use after free weakness in the Packet Forwarding Engine (PFE) microkernel architecture of Juniper Networks Junos OS may allow an attacker to cause a Denial of Service (DoS) condition whereby one or more Flexible PIC Concentrators (FPCs) may restart. As this is a race condition situation this issue become more likely to be hit when network instability occurs, such as but not limited to BGP/IGP reconvergences, and/or further likely to occur when more active "traffic flows" are occurring through the device. When this issue occurs, it will cause one or more FPCs to restart unexpectedly. During FPC restarts core files will be generated. While the core file is generated traffic will be disrupted. Sustained receipt of large traffic flows and reconvergence-like situations may sustain the Denial of Service (DoS) situation. This issue affects: Juniper Networks Junos OS: 18.1 version 18.1R2 and later versions prior to 18.1R3-S10 on PTX Series, QFX10K Series.

An issue was discovered in the hashconsing crate before 1.1.0 for Rust. Because HConsed does not have bounds on its Send trait or Sync trait, memory corruption can occur.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recv-recv race of completed call If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale.

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier.

NVIDIA Triton Inference Server Sagemaker HTTP server contains a vulnerability where an attacker may cause an exception. A successful exploit of this vulnerability may lead to denial of service.

NVIDIA Triton Inference Server contains a vulnerability where an attacker may cause internal state corruption. A successful exploit of this vulnerability may lead to a denial of service.

IBM Watson Speech Services Cartridge for IBM Cloud Pak for Data 4.0.0 through 5.0.2 does not properly check inputs to resources that are used concurrently, which might lead to unexpected states, possibly resulting in a crash.

In FreeRADIUS 3.0.x before 3.0.20, the EAP-pwd module used a global OpenSSL BN_CTX instance to handle all handshakes. This mean multiple threads use the same BN_CTX instance concurrently, resulting in crashes when concurrent EAP-pwd handshakes are initiated. This can be abused by an adversary as a Denial-of-Service (DoS) attack.

In FreeBSD 12.0-STABLE before r351264, 12.0-RELEASE before 12.0-RELEASE-p10, 11.3-STABLE before r351265, 11.3-RELEASE before 11.3-RELEASE-p3, and 11.2-RELEASE before 11.2-RELEASE-p14, the kernel driver for /dev/midistat implements a read handler that is not thread-safe. A multi-threaded program can exploit races in the handler to copy out kernel memory outside the boundaries of midistat's data buffer.

An issue was discovered in the spin crate before 0.5.2 for Rust, when RwLock is used. Because memory ordering is mishandled, two writers can acquire the lock at the same time, violating mutual exclusion.

The mozilla::dom::AudioParamTimeline::AudioNodeInputValue function in the Web Audio API implementation in Mozilla Firefox before 35.0 and SeaMonkey before 2.32 does not properly restrict timeline operations, which allows remote attackers to cause a denial of service (uninitialized-memory read and application crash) via crafted API calls.

Race condition in the lighttpd module in Cisco IOS XR 5.1 and earlier on Network Convergence System 6000 devices allows remote attackers to cause a denial of service (process reload) by establishing many TCP sessions, aka Bug ID CSCuq45239.

The server lacks thread safety and can be crashed by anomalous data sent by an anonymous user from a remote network. The crash causes the FTP service to become unavailable, affecting all users and processes that rely on it for file transfers. If the crash occurs during file upload or download, it could lead to incomplete file transfers, potentially corrupting data. The repeated crash might also affect the stability of the underlying system, especially if it leads to resource leaks or affects other services.