Guest triggered use-after-free in Linux xen-netback A malicious or buggy network PV frontend can force Linux netback to disable the interface and terminate the receive kernel thread associated with queue 0 in response to the frontend sending a malformed packet. Such kernel thread termination will lead to a use-after-free in Linux netback when the backend is destroyed, as the kernel thread associated with queue 0 will have already exited and thus the call to kthread_stop will be performed against a stale pointer.

A race problem was found in fs/proc/task_mmu.c in the memory management sub-component in the Linux kernel. This issue may allow a local attacker with user privilege to cause a denial of service.

Use After Free vulnerability in Linux kernel traffic control index filter (tcindex) allows Privilege Escalation. The imperfect hash area can be updated while packets are traversing, which will cause a use-after-free when 'tcf_exts_exec()' is called with the destroyed tcf_ext. A local attacker user can use this vulnerability to elevate its privileges to root. This issue affects Linux Kernel: from 4.14 before git commit ee059170b1f7e94e55fa6cadee544e176a6e59c2.

A use-after-free flaw was found in the Linux kernel’s mm/mremap memory address space accounting source code. This issue occurs due to a race condition between rmap walk and mremap, allowing a local user to crash the system or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails Smatch report warning as follows: drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn: '&data->list' not removed from list If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will be freed, but data->list will not be removed from driver_data.bmc_data, then list traversal may cause UAF. Fix by removeing it from driver_data.bmc_data before free().

In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other.

A use-after-free flaw was found in vhost_net_set_backend in drivers/vhost/net.c in virtio network subcomponent in the Linux kernel due to a double fget. This flaw could allow a local attacker to crash the system, and could even lead to a kernel information leak problem.

A use-after-free vulnerability in the Linux Kernel traffic control index filter (tcindex) can be exploited to achieve local privilege escalation. The tcindex_delete function which does not properly deactivate filters in case of a perfect hashes while deleting the underlying structure which can later lead to double freeing the structure. A local attacker user can use this vulnerability to elevate its privileges to root. We recommend upgrading past commit 8c710f75256bb3cf05ac7b1672c82b92c43f3d28.

A use-after-free flaw was found in the Linux kernel’s Ext4 File System in how a user triggers several file operations simultaneously with the overlay FS usage. This flaw allows a local user to crash or potentially escalate their privileges on the system. Only if patch 9a2544037600 ("ovl: fix use after free in struct ovl_aio_req") not applied yet, the kernel could be affected.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix race at socket teardown Fix a race in the xsk socket teardown code that can lead to a NULL pointer dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any NAPI processing to terminate using synchronize_net(). After that, the release code starts to tear down the socket state and free allocated memory. BUG: kernel NULL pointer dereference, address: 00000000000000c0 PGD 8000000932469067 P4D 8000000932469067 PUD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 25 PID: 69132 Comm: grpcpp_sync_ser Tainted: G I 5.16.0+ #2 Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.2.10 03/09/2015 RIP: 0010:__xsk_sendmsg+0x2c/0x690 [...] RSP: 0018:ffffa2348bd13d50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000040 RCX: ffff8d5fc632d258 RDX: 0000000000400000 RSI: ffffa2348bd13e10 RDI: ffff8d5fc5489800 RBP: ffffa2348bd13db0 R08: 0000000000000000 R09: 00007ffffffff000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d5fc5489800 R13: ffff8d5fcb0f5140 R14: ffff8d5fcb0f5140 R15: 0000000000000000 FS: 00007f991cff9400(0000) GS:ffff8d6f1f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000000114888005 CR4: 00000000001706e0 Call Trace: <TASK> ? aa_sk_perm+0x43/0x1b0 xsk_sendmsg+0xf0/0x110 sock_sendmsg+0x65/0x70 __sys_sendto+0x113/0x190 ? debug_smp_processor_id+0x17/0x20 ? fpregs_assert_state_consistent+0x23/0x50 ? exit_to_user_mode_prepare+0xa5/0x1d0 __x64_sys_sendto+0x29/0x30 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae There are two problems with the current code. First, setting xs->dev to NULL before waiting for all users to stop using the socket is not correct. The entry to the data plane functions xsk_poll(), xsk_sendmsg(), and xsk_recvmsg() are all guarded by a test that xs->state is in the state XSK_BOUND and if not, it returns right away. But one process might have passed this test but still have not gotten to the point in which it uses xs->dev in the code. In this interim, a second process executing xsk_unbind_dev() might have set xs->dev to NULL which will lead to a crash for the first process. The solution here is just to get rid of this NULL assignment since it is not used anymore. Before commit 42fddcc7c64b ("xsk: use state member for socket synchronization"), xs->dev was the gatekeeper to admit processes into the data plane functions, but it was replaced with the state variable xs->state in the aforementioned commit. The second problem is that synchronize_net() does not wait for any process in xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() to complete, which means that the state they rely on might be cleaned up prematurely. This can happen when the notifier gets called (at driver unload for example) as it uses xsk_unbind_dev(). Solve this by extending the RCU critical region from just the ndo_xsk_wakeup to the whole functions mentioned above, so that both the test of xs->state == XSK_BOUND and the last use of any member of xs is covered by the RCU critical section. This will guarantee that when synchronize_net() completes, there will be no processes left executing xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() and state can be cleaned up safely. Note that we need to drop the RCU lock for the skb xmit path as it uses functions that might sleep. Due to this, we have to retest the xs->state after we grab the mutex that protects the skb xmit code from, among a number of things, an xsk_unbind_dev() being executed from the notifier at the same time.

In the Linux kernel, the following vulnerability has been resolved: ionic: fix kernel panic in XDP_TX action In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set hci_cmd_sync_queue shall return an error if HCI_UNREGISTER flag has been set as that means hci_unregister_dev has been called so it will likely cause a uaf after the timeout as the hdev will be freed.

Use-after-free vulnerability in the Transform object implementation in Adobe Flash Player before 18.0.0.343 and 19.x through 21.x before 21.0.0.213 on Windows and OS X and before 11.2.202.616 on Linux allows attackers to execute arbitrary code via a flash.geom.Matrix callback, a different vulnerability than CVE-2016-1011, CVE-2016-1013, CVE-2016-1017, and CVE-2016-1031.

In the Linux kernel, the following vulnerability has been resolved: ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855 Commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") is to fix firmware crash by changing the WMI command sequence, but actually skip all the peer delete operation, then it lead commit 58595c9874c6 ("ath11k: Fixing dangling pointer issue upon peer delete failure") not take effect, and then happened a use-after-free warning from KASAN. because the peer->sta is not set to NULL and then used later. Change to only skip the WMI_PEER_DELETE_CMDID for QCA6390/WCN6855. log of user-after-free: [ 534.888665] BUG: KASAN: use-after-free in ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888696] Read of size 8 at addr ffff8881396bb1b8 by task rtcwake/2860 [ 534.888705] CPU: 4 PID: 2860 Comm: rtcwake Kdump: loaded Tainted: G W 5.15.0-wt-ath+ #523 [ 534.888712] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 534.888716] Call Trace: [ 534.888720] <IRQ> [ 534.888726] dump_stack_lvl+0x57/0x7d [ 534.888736] print_address_description.constprop.0+0x1f/0x170 [ 534.888745] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888771] kasan_report.cold+0x83/0xdf [ 534.888783] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888810] ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888840] ath11k_dp_rx_process_mon_status+0x529/0xa70 [ath11k] [ 534.888874] ? ath11k_dp_rx_mon_status_bufs_replenish+0x3f0/0x3f0 [ath11k] [ 534.888897] ? check_prev_add+0x20f0/0x20f0 [ 534.888922] ? __lock_acquire+0xb72/0x1870 [ 534.888937] ? find_held_lock+0x33/0x110 [ 534.888954] ath11k_dp_rx_process_mon_rings+0x297/0x520 [ath11k] [ 534.888981] ? rcu_read_unlock+0x40/0x40 [ 534.888990] ? ath11k_dp_rx_pdev_alloc+0xd90/0xd90 [ath11k] [ 534.889026] ath11k_dp_service_mon_ring+0x67/0xe0 [ath11k] [ 534.889053] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889075] call_timer_fn+0x167/0x4a0 [ 534.889084] ? add_timer_on+0x3b0/0x3b0 [ 534.889103] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 534.889117] __run_timers.part.0+0x539/0x8b0 [ 534.889123] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889157] ? call_timer_fn+0x4a0/0x4a0 [ 534.889164] ? mark_lock_irq+0x1c30/0x1c30 [ 534.889173] ? clockevents_program_event+0xdd/0x280 [ 534.889189] ? mark_held_locks+0xa5/0xe0 [ 534.889203] run_timer_softirq+0x97/0x180 [ 534.889213] __do_softirq+0x276/0x86a [ 534.889230] __irq_exit_rcu+0x11c/0x180 [ 534.889238] irq_exit_rcu+0x5/0x20 [ 534.889244] sysvec_apic_timer_interrupt+0x8e/0xc0 [ 534.889251] </IRQ> [ 534.889254] <TASK> [ 534.889259] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 534.889265] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 534.889271] Code: 74 24 10 e8 ea c2 bf fd 48 89 ef e8 12 53 c0 fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 13 a7 b5 fd 65 8b 05 cc d9 9c 5e 85 c0 74 0a 5b 5d c3 e8 a0 ee [ 534.889276] RSP: 0018:ffffc90002e5f880 EFLAGS: 00000206 [ 534.889284] RAX: 0000000000000006 RBX: 0000000000000200 RCX: ffffffff9f256f10 [ 534.889289] RDX: 0000000000000000 RSI: ffffffffa1c6e420 RDI: 0000000000000001 [ 534.889293] RBP: ffff8881095e6200 R08: 0000000000000001 R09: ffffffffa40d2b8f [ 534.889298] R10: fffffbfff481a571 R11: 0000000000000001 R12: ffff8881095e6e68 [ 534.889302] R13: ffffc90002e5f908 R14: 0000000000000246 R15: 0000000000000000 [ 534.889316] ? mark_lock+0xd0/0x14a0 [ 534.889332] klist_next+0x1d4/0x450 [ 534.889340] ? dpm_wait_for_subordinate+0x2d0/0x2d0 [ 534.889350] device_for_each_child+0xa8/0x140 [ 534.889360] ? device_remove_class_symlinks+0x1b0/0x1b0 [ 534.889370] ? __lock_release+0x4bd/0x9f0 [ 534.889378] ? dpm_suspend+0x26b/0x3f0 [ 534.889390] dpm_wait_for_subordinate+ ---truncated---

A use-after-free flaw was found in smb2_is_status_io_timeout() in CIFS in the Linux Kernel. After CIFS transfers response data to a system call, there are still local variable points to the memory region, and if the system call frees it faster than CIFS uses it, CIFS will access a free memory region, leading to a denial of service.

In the Linux kernel, the following vulnerability has been resolved: ice: fix concurrent reset and removal of VFs Commit c503e63200c6 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions.

A use-after-free flaw was found in the Linux kernel’s core dump subsystem. This flaw allows a local user to crash the system. Only if patch 390031c94211 ("coredump: Use the vma snapshot in fill_files_note") not applied yet, then kernel could be affected.

A flaw use after free in the Linux kernel integrated infrared receiver/transceiver driver was found in the way user detaching rc device. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: vdpa: fix use-after-free on vp_vdpa_remove When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].end

A race condition was found in the Linux kernel's media/xc4000 device driver in xc4000 xc4000_get_frequency() function. This can result in return value overflow issue, possibly leading to malfunction or denial of service issue.

Use-after-free vulnerability in the ReadPWPImage function in coders/pwp.c in ImageMagick 6.9.5-5 allows remote attackers to cause a denial of service (application crash) or have other unspecified impact via a crafted file.

In the Linux kernel, the following vulnerability has been resolved: USB: gadgetfs: Fix race between mounting and unmounting The syzbot fuzzer and Gerald Lee have identified a use-after-free bug in the gadgetfs driver, involving processes concurrently mounting and unmounting the gadgetfs filesystem. In particular, gadgetfs_fill_super() can race with gadgetfs_kill_sb(), causing the latter to deallocate the_device while the former is using it. The output from KASAN says, in part: BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:102 [inline] BUG: KASAN: use-after-free in atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] BUG: KASAN: use-after-free in __refcount_sub_and_test include/linux/refcount.h:272 [inline] BUG: KASAN: use-after-free in __refcount_dec_and_test include/linux/refcount.h:315 [inline] BUG: KASAN: use-after-free in refcount_dec_and_test include/linux/refcount.h:333 [inline] BUG: KASAN: use-after-free in put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] BUG: KASAN: use-after-free in gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 Write of size 4 at addr ffff8880276d7840 by task syz-executor126/18689 CPU: 0 PID: 18689 Comm: syz-executor126 Not tainted 6.1.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> ... atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 vfs_get_super fs/super.c:1190 [inline] get_tree_single+0xd0/0x160 fs/super.c:1207 vfs_get_tree+0x88/0x270 fs/super.c:1531 vfs_fsconfig_locked fs/fsopen.c:232 [inline] The simplest solution is to ensure that gadgetfs_fill_super() and gadgetfs_kill_sb() are serialized by making them both acquire a new mutex.

In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use after free in iucv_sock_close() iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.

In the Linux kernel, the following vulnerability has been resolved: PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal Keith reports a use-after-free when a DPC event occurs concurrently to hot-removal of the same portion of the hierarchy: The dpc_handler() awaits readiness of the secondary bus below the Downstream Port where the DPC event occurred. To do so, it polls the config space of the first child device on the secondary bus. If that child device is concurrently removed, accesses to its struct pci_dev cause the kernel to oops. That's because pci_bridge_wait_for_secondary_bus() neglects to hold a reference on the child device. Before v6.3, the function was only called on resume from system sleep or on runtime resume. Holding a reference wasn't necessary back then because the pciehp IRQ thread could never run concurrently. (On resume from system sleep, IRQs are not enabled until after the resume_noirq phase. And runtime resume is always awaited before a PCI device is removed.) However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness of secondary bus after reset"), which introduced that, failed to appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a reference on the child device because dpc_handler() and pciehp may indeed run concurrently. The commit was backported to v5.10+ stable kernels, so that's the oldest one affected. Add the missing reference acquisition. Abridged stack trace: BUG: unable to handle page fault for address: 00000000091400c0 CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0 RIP: pci_bus_read_config_dword+0x17/0x50 pci_dev_wait() pci_bridge_wait_for_secondary_bus() dpc_reset_link() pcie_do_recovery() dpc_handler()

A race condition was found in the Linux kernel's drm/exynos device driver in exynos_drm_crtc_atomic_disable() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.

An out-of-bounds (OOB) memory read flaw was found in parse_lease_state in the KSMBD implementation of the in-kernel samba server and CIFS in the Linux kernel. When an attacker sends the CREATE command with a malformed payload to KSMBD, due to a missing check of `NameOffset` in the `parse_lease_state()` function, the `create_context` object can access invalid memory.

A flaw was found in the Linux kernel. A use-after-free may be triggered in asus_kbd_backlight_set when plugging/disconnecting in a malicious USB device, which advertises itself as an Asus device. Similarly to the previous known CVE-2023-25012, but in asus devices, the work_struct may be scheduled by the LED controller while the device is disconnecting, triggering a use-after-free on the struct asus_kbd_leds *led structure. A malicious USB device may exploit the issue to cause memory corruption with controlled data.

nsFrameManager in Firefox 3.x before 3.0.4, Firefox 2.x before 2.0.0.18, Thunderbird 2.x before 2.0.0.18, and SeaMonkey 1.x before 1.1.13 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code by modifying properties of a file input element while it is still being initialized, then using the blur method to access uninitialized memory.

A use-after-free vulnerability was discovered in Adobe Flash Player before 28.0.0.161. This vulnerability occurs due to a dangling pointer in the Primetime SDK related to media player handling of listener objects. A successful attack can lead to arbitrary code execution. This was exploited in the wild in January and February 2018.

Use After Free vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (bluetooth modules) allows Local Execution of Code. This vulnerability is associated with program files https://gitee.Com/anolis/cloud-kernel/blob/devel-5.10/net/bluetooth/af_bluetooth.C. This issue affects Linux kernel: from v2.6.12-rc2 before v6.8-rc1.

Adobe Flash Player versions 28.0.0.161 and earlier have an exploitable use after free vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user.

Adobe Flash Player versions 29.0.0.113 and earlier have an exploitable Use-After-Free vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user.

In the Linux kernel through 4.14.13, drivers/block/loop.c mishandles lo_release serialization, which allows attackers to cause a denial of service (__lock_acquire use-after-free) or possibly have unspecified other impact.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix stale file descriptors on failed usercopy A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded.

An issue was discovered in the __ns_get_path function in fs/nsfs.c in the Linux kernel before 4.11. Due to a race condition when accessing files, a Use After Free condition can occur. This also affects all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05.

In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del().

A race condition in Linux kernel SCTP sockets (net/sctp/socket.c) before 5.12-rc8 can lead to kernel privilege escalation from the context of a network service or an unprivileged process. If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock then an element is removed from the auto_asconf_splist list without any proper locking. This can be exploited by an attacker with network service privileges to escalate to root or from the context of an unprivileged user directly if a BPF_CGROUP_INET_SOCK_CREATE is attached which denies creation of some SCTP socket.

libarchive version commit 416694915449219d505531b1096384f3237dd6cc onwards (release v3.1.0 onwards) contains a CWE-416: Use After Free vulnerability in RAR decoder - libarchive/archive_read_support_format_rar.c that can result in Crash/DoS - it is unknown if RCE is possible. This attack appear to be exploitable via the victim must open a specially crafted RAR archive.

Use After Free vulnerability in nfc sockets in the Linux Kernel before 5.12.4 allows local attackers to elevate their privileges. In typical configurations, the issue can only be triggered by a privileged local user with the CAP_NET_RAW capability.

A use-after-free flaw was found in io_uring/poll.c in io_poll_check_events in the io_uring subcomponent in the Linux Kernel due to a race condition of poll_refs. This flaw may cause a NULL pointer dereference.

Race condition in the do_setlk function in fs/nfs/file.c in the Linux kernel before 2.6.26 allows local users to cause a denial of service (crash) via vectors resulting in an interrupted RPC call that leads to a stray FL_POSIX lock, related to improper handling of a race between fcntl and close in the EINTR case.

An issue was discovered in fs/xfs/xfs_super.c in the Linux kernel before 4.18. A use after free exists, related to xfs_fs_fill_super failure.

Use after free in Web Sockets in Google Chrome on Linux prior to 88.0.4324.182 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

An issue was discovered in the Linux kernel before 4.20. There is a race condition in smp_task_timedout() and smp_task_done() in drivers/scsi/libsas/sas_expander.c, leading to a use-after-free.

In the Linux kernel through 4.19.6, a local user could exploit a use-after-free in the ALSA driver by supplying a malicious USB Sound device (with zero interfaces) that is mishandled in usb_audio_probe in sound/usb/card.c.

Use after free in drag and drop in Google Chrome on Linux prior to 87.0.4280.141 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page.

An issue was discovered in the Linux kernel before 4.18.7. In block/blk-core.c, there is an __blk_drain_queue() use-after-free because a certain error case is mishandled.

arch/x86/kernel/ptrace.c in the Linux kernel before 2.6.25.10 on the x86_64 platform leaks task_struct references into the sys32_ptrace function, which allows local users to cause a denial of service (system crash) or have unspecified other impact via unknown vectors, possibly a use-after-free vulnerability.

Use after free in Network Internals in Google Chrome on Linux prior to 89.0.4389.72 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

A use-after-free flaw was found in the Linux kernel’s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.