A stack-based buffer overflow vulnerability exists in the JSON Parsing getblockschedule() functionality of Netgear RAX30 1.0.11.96 and 1.0.7.78. A specially crafted HTTP request can lead to code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Netgear Inc WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the parse_st_header function due to use of a request header parameter in a strncpy where size is determined based on the input specified. By sending a specially crafted packet, an attacker can take control of the program counter and hijack control flow of the program to execute arbitrary system commands.

NETGEAR RAX30 soap_serverd Stack-based Buffer Overflow Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the soap_serverd binary. When parsing SOAP message headers, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-19839.

A vulnerability classified as critical has been found in Netgear EX6150 1.0.0.46_1.0.76. This affects the function sub_410090. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

NETGEAR RAX30 rex_cgi JSON Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of JSON data. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19355.

A vulnerability was found in Netgear EX3700 up to 1.0.0.88. It has been classified as critical. Affected is the function sub_41619C of the file /mtd. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.0.0.98 is able to address this issue. It is recommended to upgrade the affected component. This vulnerability only affects products that are no longer supported by the maintainer.

NETGEAR RAX30 soap_serverd Stack-based Buffer Overflow Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30. Authentication is not required to exploit this vulnerability. The specific flaw exists within the soap_serverd binary. When parsing the request headers, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-19840.

A vulnerability was found in Netgear EX6100 1.0.2.28_1.1.138. It has been rated as critical. Affected by this issue is the function sub_415EF8. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow vulnerability exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the usb_folder parameter.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the read_access parameter.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow vulnerability exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the share_name parameter.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the UPnP service, which listens on TCP port 5000 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9643.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the setupwizard.cgi page. When parsing the SOAP_LOGIN_TOKEN environment variable, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14107.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the circled daemon. A crafted circleinfo.txt file can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15879.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9703.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers with firmware 1.0.4.84_10.0.58. Authentication is not required to exploit this vulnerability. The specific flaw exists within the acsd service, which listens on TCP port 5916 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-9853.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR R6400, R6700, R7000, R7850, R7900, R8000, RS400, and XR300 routers with firmware 1.0.4.84_10.0.58. Authentication is not required to exploit this vulnerability. The specific flaw exists within the check_ra service. A crafted raePolicyVersion in a RAE_Policy.json file can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9852.

NETGEAR RAX30 cmsCli_authenticate Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within a shared library used by the telnetd service, which listens on TCP port 23 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19918.

NETGEAR Multiple Routers httpd Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of multiple NETGEAR routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. When parsing the strings file, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-13709.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6400 and R6700 firmware version 1.0.4.98 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the upnpd service, which listens on UDP port 1900 by default. A crafted MX header field in an SSDP message can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11851.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the var:page parameter provided to the webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13271.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the webproc endpoint, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12104.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the var:menu parameter provided to the webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13270.

A vulnerability has been identified in RUGGEDCOM RM1224 (All versions >= V4.3 and < V6.4), SCALANCE M-800 (All versions >= V4.3 and < V6.4), SCALANCE S615 (All versions >= V4.3 and < V6.4), SCALANCE SC-600 Family (All versions >= V2.0 and < V2.1.3), SCALANCE XB-200 (All versions < V4.1), SCALANCE XC-200 (All versions < V4.1), SCALANCE XF-200BA (All versions < V4.1), SCALANCE XM400 (All versions < V6.2), SCALANCE XP-200 (All versions < V4.1), SCALANCE XR-300WG (All versions < V4.1), SCALANCE XR500 (All versions < V6.2). Affected devices contain a stack-based buffer overflow vulnerability in the handling of STP BPDU frames that could allow a remote attacker to trigger a denial-of-service condition or potentially remote code execution. Successful exploitation requires the passive listening feature of the device to be active.

gpsd versions 2.90 to 3.17 and microjson versions 1.0 to 1.3, an open source project, allow a stack-based buffer overflow, which may allow remote attackers to execute arbitrary code on embedded platforms via traffic on Port 2947/TCP or crafted JSON inputs.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Losant Arduino MQTT Client prior to V2.7. User interaction is not required to exploit this vulnerability. The specific flaw exists within the parsing of MQTT PUBLISH packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-6436.

DeltaV Versions 11.3.1, 12.3.1, 13.3.0, 13.3.1, and R5 is vulnerable to a buffer overflow exploit through an open communication port to allow arbitrary code execution.

BT: Unchecked user input in bap_broadcast_assistant