Tenda G3 Router firmware v15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the usbPartitionName parameter in the formSetUSBPartitionUmount function.

A vulnerability, which was classified as critical, was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023. This affects the function setDiagnosisCfg. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237513 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the Hostname parameter within the WAN settings. This vulnerability is exploited via a crafted payload.

There are command injection vulnerabilities in the underlying Soft AP Daemon service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An issue in franfinance before v.2.0.27 allows a remote attacker to execute arbitrary code via the validation.php, and controllers/front/validation.php components.

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [1] or [2], based on DDNS type, the ddns->username variable, that has the value of the userName parameter provided through the SetDdns API, is not validated properly. This would lead to an OS command injection.

The management console in Symantec Web Gateway 5.0.x before 5.0.3.18 allows remote attackers to execute arbitrary commands via crafted input to application scripts.

The affected On-Premise cnMaestro allows an unauthenticated attacker to access the cnMaestro server and execute arbitrary code in the privileges of the web server. This lack of validation could allow an attacker to append arbitrary data to the logger command.

The management console in Symantec Web Gateway 5.0.x before 5.0.3.18 allows remote attackers to execute arbitrary shell commands via crafted input to application scripts, related to an "injection" issue.

D-LINK DIR-806 1200M11AC wireless router DIR806A1_FW100CNb11 is vulnerable to command injection due to lax filtering of REMOTE_PORT parameters.

A remote code execution vulnerability exists in mintplex-labs/anything-llm due to improper handling of environment variables. Attackers can exploit this vulnerability by injecting arbitrary environment variables via the `POST /api/system/update-env` endpoint, which allows for the execution of arbitrary code on the host running anything-llm. The vulnerability is present in the latest version of anything-llm, with the latest commit identified as fde905aac1812b84066ff72e5f2f90b56d4c3a59. This issue has been fixed in version 1.0.0. Successful exploitation could lead to code execution on the host, enabling attackers to read and modify data accessible to the user running the service, potentially leading to a denial of service.

The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd).

An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [1] or [2], based on DDNS type, the ddns->password variable, that has the value of the password parameter provided through the SetDdns API, is not validated properly. This would lead to an OS command injection.

A command injection vulnerability in the web interface of the Zyxel NWA-1100-NH firmware could allow an attacker to execute arbitrary OS commands on the device.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getImageMP4.php is vulnerable to a command injection attack.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getSpiritsFromVideo.php is vulnerable to a command injection attack.

NextcloudPi is a ready to use image for Virtual Machines, Raspberry Pi, Odroid HC1, Rock64 and other boards. A command injection vulnerability in NextCloudPi allows command execution as the root user via the NextCloudPi web-panel. Due to a security misconfiguration this can be used by anyone with access to NextCloudPi web-panel, no authentication is required. It is recommended that the NextCloudPi is upgraded to 1.53.1.

IBM API Connect 5.0.0.0 and 5.0.8.6 Developer Portal is vulnerable to command injection. An attacker with a specially crafted request can run arbitrary code on the server and gain complete access to the system. IBM X-Force ID: 159123.

BinderHub is a kubernetes-based cloud service that allows users to share reproducible interactive computing environments from code repositories. In affected versions a remote code execution vulnerability has been identified in BinderHub, where providing BinderHub with maliciously crafted input could execute code in the BinderHub context, with the potential to egress credentials of the BinderHub deployment, including JupyterHub API tokens, kubernetes service accounts, and docker registry credentials. This may provide the ability to manipulate images and other user created pods in the deployment, with the potential to escalate to the host depending on the underlying kubernetes configuration. Users are advised to update to version 0.2.0-n653. If users are unable to update they may disable the git repo provider by specifying the `BinderHub.repo_providers` as a workaround.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to execute arbitrary commands on the system, caused by improper validation of user-supplied input by the Spectrum Copy Data Management Admin Console login and uploadcertificate function . A remote attacker could inject arbitrary shell commands which would be executed on the affected system. IBM X-Force ID: 214958.

A command injection vulnerability in Nokogiri v1.10.3 and earlier allows commands to be executed in a subprocess via Ruby's `Kernel.open` method. Processes are vulnerable only if the undocumented method `Nokogiri::CSS::Tokenizer#load_file` is being called with unsafe user input as the filename. This vulnerability appears in code generated by the Rexical gem versions v1.0.6 and earlier. Rexical is used by Nokogiri to generate lexical scanner code for parsing CSS queries. The underlying vulnerability was addressed in Rexical v1.0.7 and Nokogiri upgraded to this version of Rexical in Nokogiri v1.10.4.

MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote unauthenticated attacker to execute an arbitrary OS command.

** UNSUPPORTED WHEN ASSIGNED ** The command injection vulnerability in the CGI program "remote_help-cgi" in Zyxel NAS326 firmware versions before V5.21(AAZF.17)C0 and NAS542 firmware versions before V5.21(ABAG.14)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted HTTP POST request.

A command injection vulnerability has been reported to affect QNAP device, VioStor. If exploited, this vulnerability allows remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR FW 5.1.6 build 20211109 and later

OS Command Injection in GitHub repository ljharb/npm-lockfile in v2.0.3 and v2.0.4.

A vulnerability classified as critical has been found in Tenda AC18 15.03.05.05. Affected is the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-257778 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An exploitable command injection vulnerability exists in the Config editor of the Exhibitor Web UI versions 1.0.9 to 1.7.1. Arbitrary shell commands surrounded by backticks or $() can be inserted into the editor and will be executed by the Exhibitor process when it launches ZooKeeper. An attacker can execute any command as the user running the Exhibitor process.

Accellion File Transfer Appliance version FTA_8_0_540 suffers from an instance of CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection').

An OS command injection vulnerability exists in the name parameter of GoCast 1.1.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

The HGiga OAKlouds mobile portal does not filter special characters of the IPv6 Gateway parameter of the network interface card setting page. Remote attackers can use this vulnerability to perform command injection and execute arbitrary commands in the system without logging in.

The HGiga OAKlouds mobile portal does not filter special characters of the Ethernet number parameter of the network interface card setting page. Remote attackers can use this vulnerability to perform command injection and execute arbitrary commands in the system without logging in.

OS Command Injection in GitHub repository part-db/part-db prior to 0.5.11.

OS command injection vulnerability exists in ffBull ver.4.11, which may allow a remote unauthenticated attacker to execute an arbitrary OS command with the privilege of the running web server. Note that the developer was unreachable, therefore, users should consider stop using ffBull ver.4.11.

A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257775. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Network Attached Storage on LG N1T1*** 10124 devices allows an unauthenticated attacker to gain root access via OS command injection in the en/ajp/plugins/access.ssh/checkInstall.php destServer parameter.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getImage.php is vulnerable to a command injection attack.

NPM package gitlabhook version 0.0.17 is vulnerable to a Command Injection vulnerability. Arbitrary commands can be injected through the repository name.

ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request.

Server-Side Template Injection (SSTI) vulnerability in livehelperchat before 4.34v, allows remote attackers to execute arbitrary code and obtain sensitive information via the search parameter in lhc_web/modules/lhfaq/faqweight.php.

Zoho ManageEngine ADManager Plus version 7110 and prior has a Post-Auth OS command injection vulnerability.

QNAP QTS before 4.2.4 Build 20170313 allows attackers to gain administrator privileges and execute arbitrary commands via unspecified vectors.

The Crestron AM-100 firmware 1.6.0.2, Crestron AM-101 firmware 2.7.0.1, Barco wePresent WiPG-1000P firmware 2.3.0.10, Barco wePresent WiPG-1600W before firmware 2.4.1.19, Extron ShareLink 200/250 firmware 2.0.3.4, Teq AV IT WIPS710 firmware 1.1.0.7, SHARP PN-L703WA firmware 1.4.2.3, Optoma WPS-Pro firmware 1.0.0.5, Blackbox HD WPS firmware 1.0.0.5, InFocus LiteShow3 firmware 1.0.16, and InFocus LiteShow4 2.0.0.7 are vulnerable to command injection via the file_transfer.cgi HTTP endpoint. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

A Command Injection vulnerability exists in the getTopologyHistory service of the Apache Storm 2.x prior to 2.2.1 and Apache Storm 1.x prior to 1.2.4. A specially crafted thrift request to the Nimbus server allows Remote Code Execution (RCE) prior to authentication.

The WP Database Backup plugin for WordPress is vulnerable to OS Command Injection in versions before 5.2 via the mysqldump function. This vulnerability allows unauthenticated attackers to execute arbitrary commands on the host operating system.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to command injection via SNMP OID iso.3.6.1.4.1.3212.100.3.2.14.1. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root.

totolink a3100r V5.9c.4577 is vulnerable to os command injection. The backend of a page is executing the "ping" command, and the input field does not adequately filter special symbols. This can lead to command injection attacks.

Blink XT2 Sync Module firmware prior to 2.13.11 allows remote attackers to execute arbitrary commands on the device due to improperly sanitized input when the device retrieves updates scripts from the internet.

# Vulnerability in `pygmalion`, `pygmalion-virtualenv` and `refined` themes **Description**: these themes use `print -P` on user-supplied strings to print them to the terminal. All of them do that on git information, particularly the branch name, so if the branch has a specially-crafted name the vulnerability can be exploited. **Fixed in**: [b3ba9978](https://github.com/ohmyzsh/ohmyzsh/commit/b3ba9978). **Impacted areas**: - `pygmalion` theme. - `pygmalion-virtualenv` theme. - `refined` theme.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetUSBShareInfo. This vulnerability allows attackers to execute arbitrary commands via the usbOrdinaryUserName parameter.