A vulnerability was found in D-Link DCS-932L 2.18.01. It has been rated as critical. Affected by this issue is the function setSystemWizard/setSystemControl of the file /setSystemWizard. The manipulation of the argument AdminID leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

PublicCMS v4.0 was discovered to contain a remote code execution (RCE) vulnerability via the cmdarray parameter.

CGI implementation in Yaws web server versions 1.81 to 2.0.7 is vulnerable to OS command injection.

D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests.

Exposed Erlang Cookie could lead to Remote Command Execution (RCE) attack. Communication between Erlang nodes is done by exchanging a shared secret (aka "magic cookie"). There are cases where the magic cookie is included in the content of the logs. An attacker can use the cookie to attach to an Erlang node and run OS level commands on the system running the Erlang node. Affects version: 6.5.1. Fix version: 6.6.0.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter. The manipulation of the argument apselect_%d/newap_text_%d leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this vulnerability is the function RP_UpgradeFWByBBS of the file /goform/RP_UpgradeFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

OX App Suite through 7.10.6 allows OS Command Injection via Documentconverter (e.g., through an email attachment).

A command injection vulnerability in HNAP1/GetNetworkTomographySettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary code.

GateOne allows remote attackers to execute arbitrary commands via shell metacharacters in the port field when attempting an SSH connection.

A remote command execution vulnerability exists in add_server_service of PPTP_SERVER in Mercury Router MER1200 v1.0.1 and Mercury Router MER1200G v1.0.1.

The download_from_url function in OpenShift Origin allows remote attackers to execute arbitrary commands via shell metacharacters in the URL of a request to download a cart.

react-dev-utils on Windows allows developers to run a local webserver for accepting various commands, including a command to launch an editor. The input to that command was not properly sanitized, allowing an attacker who can make a network request to the server (either via CSRF or by direct request) to execute arbitrary commands on the targeted system. This issue affects multiple branches: 1.x.x prior to 1.0.4, 2.x.x prior to 2.0.2, 3.x.x prior to 3.1.2, 4.x.x prior to 4.2.2, and 5.x.x prior to 5.0.2.

iTunesRPC-Remastered is a Discord Rich Presence for iTunes on Windows utility. In affected versions iTunesRPC-Remastered did not properly sanitize image file paths leading to OS level command injection. This issue has been patched in commit cdcd48b. Users are advised to upgrade.

iCMS 7.0.14 attackers to execute arbitrary OS commands via shell metacharacters in the DB_NAME parameter to install/install.php.

TOTOLINK N600R V4.3.0cu.7647_B20210106 was discovered to contain a command injection vulnerability via the pin parameter in the setWiFiWpsConfig function.

An OS command injection vulnerability exists in Russound MBX-PRE-D67F firmware version 3.1.6, allowing unauthenticated attackers to execute arbitrary commands as root via crafted input to the hostname parameter in network configuration requests. This vulnerability stems from improper neutralization of special elements used in an OS command within the network configuration handler, enabling remote code execution with the highest privileges.

A vulnerability was found in Fujian Kelixun 1.0. It has been classified as critical. This affects an unknown part of the file /app/fax/fax_view.php of the component Filename Handler. The manipulation of the argument fax_file leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

WeGIA is a web manager for charitable institutions. Prior to version 3.4.2, an OS Command Injection vulnerability was identified in the /html/configuracao/debug_info.php endpoint. The branch parameter is not properly sanitized before being concatenated and executed in a shell command on the server's operating system. This flaw allows an unauthenticated attacker to execute arbitrary commands on the server with the privileges of the web server user (www-data). This issue has been patched in version 3.4.2.

Command injection exists in pdf-image v2.0.0 due to an unescaped string parameter.

The D-Link DSR-250 (3.14) DSR-1000N (2.11B201) UPnP service contains a command injection vulnerability, which can cause remote command execution.

In Apache SpamAssassin before 3.4.5, malicious rule configuration (.cf) files can be configured to run system commands without any output or errors. With this, exploits can be injected in a number of scenarios. In addition to upgrading to SA version 3.4.5, users should only use update channels or 3rd party .cf files from trusted places.

Firejail through 0.9.62 mishandles shell metacharacters during use of the --output or --output-stderr option, which may lead to command injection.

On D-Link DIR-818LW Rev.A 2.05.B03 and DIR-860L Rev.B 2.03.B03 devices, unauthenticated remote OS command execution can occur in the soap.cgi service of the cgibin binary via an "&&" substring in the service parameter. NOTE: this issue exists because of an incomplete fix for CVE-2018-6530.

This affects all versions of package spritesheet-js. It depends on a vulnerable package platform-command. The injection point is located in line 32 in lib/generator.js, which is triggered by main entry of the package.

statuswml.cgi in Nagios before 3.1.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) ping or (2) Traceroute parameters.

An OS command injection vulnerability in Hardy Barth cPH2 eCharge Ladestation v1.87.0 and earlier, may allow an unauthenticated remote attacker to execute arbitrary commands on the system via a specifically crafted arguments passed to the connectivity check feature.

An os command injection vulnerability exists in the confsrv ucloud_add_node functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a malicious packet to trigger this vulnerability.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the ntpServIP parameter in the Time Settings.

TOTOLINK A3002R v4.0.0-B20230531.1404 was discovered to contain a command injection vulnerability via the FUN_00459fdc function.

A critical issue has been discovered in GitLab affecting all versions starting from 14.0 prior to 14.10.5, 15.0 prior to 15.0.4, and 15.1 prior to 15.1.1 where an authenticated user authorized to import projects could import a maliciously crafted project leading to remote code execution.

Tenda AC9 v15.03.05.14 was discovered to contain a command injection vulnerability via the Telnet function.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_php_pecl.php. When parsing the modulo parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9728.

An issue was discovered on KuWFi GC111 devices (Hardware Version: CPE-LM321_V3.2, Software Version: GC111-GL-LM321_V3.0_20191211). They are vulnerable to unauthenticated /goform/goform_set_cmd_process requests. A crafted POST request, using the SSID parameter, allows remote attackers to execute arbitrary OS commands with root privileges.

In GL.iNET GL-AR300M routers with firmware v4.3.7, it is possible to inject arbitrary shell commands through a crafted package name in the package information functionality.

Improper neutralization of Special Elements leading to OS Command Injection vulnerability impacting end-of-life Secure Remote Access (SRA) products and older firmware versions of Secure Mobile Access (SMA) 100 series products, specifically the SRA appliances running all 8.x, 9.0.0.5-19sv and earlier versions and Secure Mobile Access (SMA) 100 series products running older firmware 9.0.0.9-26sv and earlier versions

An issue in ZIONCOM (Hong Kong) Technology Limited A7000R v.4.1cu.4154 allows an attacker to execute arbitrary code via the cig-bin/cstecgi.cgi to the settings/setPasswordCfg function.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_crons.php. When parsing the line parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9714.

A vulnerability was found in D-Link DAR-8000-10 up to 20230809. It has been classified as critical. This affects an unknown part of the file /app/sys1.php. The manipulation of the argument cmd with the input id leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-238047. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the username parameter.

A command injection vulnerability in the component /cgi-bin/firewall.cgi of Wavlink WL-WN579A3 v1.0 allows attackers to execute arbitrary commands via a crafted input.

There are multiple unauthorized remote command execution vulnerabilities in the H3C ER2200G2, ERG2-450W, ERG2-1200W, ERG2-1350W, NR1200W series routers before ERG2AW-MNW100-R1117; H3C ER3100G2, ER3200G2, ER3260G2, ER5100G2, ER5200G2, ER6300G2, ER8300G2, ER8300G2-X series routers before ERHMG2-MNW100-R1126; GR3200, GR5200, GR8300 and other series routers before MiniGR1B0V100R018L50; GR-1800AX before MiniGRW1B0V100R009L50; GR-3000AX before SWBRW1A0V100R007L50; and GR-5400AX before SWBRW1B0V100R009L50. Attackers can bypass authentication by including specially crafted text in the request URL or message header, and then inject arbitrary malicious commands into some fields related to ACL access control list and user group functions and execute to obtain the highest ROOT privileges of remote devices, thereby completely taking over the remote target devices.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_crons.php. When parsing the user parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9740.

goform/AdvSetLanip endpoint on Tenda AC15 AC1900 15.03.05.19 devices allows remote attackers to execute arbitrary system commands via shell metacharacters in the lanIp POST parameter.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_dashboard.php. When parsing the ai_service parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9724.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

An OS command injection vulnerability exists in web2py 2.24.1 and earlier. When the product is configured to use notifySendHandler for logging (not the default configuration), a crafted web request may execute an arbitrary OS command on the web server using the product.

For u-link Management API an unauthenticated remote attacker in a man-in-the-middle position can inject arbitrary commands in responses returned by WWH servers, which are then executed with elevated privileges. To get into such a position, clients would need to use insecure proxy configurations.