D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.

The flash_tool gem through 0.6.0 for Ruby allows command execution via shell metacharacters in the name of a downloaded file.

Seiko SkyBridge MB-A100/A110 v4.2.0 and below was discovered to contain a command injection vulnerability via the ipAddress parameter at 07system08execute_ping_01.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability in function sub_424CB4. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter iface.

Emerson Process Management ROC800 RTU with software 3.50 and earlier, DL8000 RTU with software 2.30 and earlier, and ROC800L RTU with software 1.20 and earlier allows remote attackers to execute arbitrary commands via a TCP replay attack.

A vulnerability was discovered in DI_8400-16.07.26A1, which has been classified as critical. This issue affects the upgrade_filter_asp function in the upgrade_filter.asp file. Manipulation of the path parameter can lead to command injection.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function wget_test.asp. This vulnerability allows attackers to execute arbitrary commands via the url parameter.

Multiple versions of GARO Wallbox GLB/GTB/GTC are affected by unauthenticated command injection. The url parameter of the function module downloadAndUpdate is vulnerable to an command Injection. Unfiltered user input is used to generate code which then gets executed when downloading new firmware.

There is command injection in the addMeshNode interface of xqnetwork.lua, which leads to command execution under administrator authority on Xiaomi router AX3600 with rom versionrom< 1.1.12

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function version_upgrade.asp. This vulnerability allows attackers to execute arbitrary commands via the path parameter.

Tenda W18E V16.01.0.8(1576) has a command injection vulnerability via the hostName parameter in the formSetNetCheckTools function.

Honeywell HDZP252DI 1.00.HW02.4 and HBW2PER1 1.000.HW01.3 devices allow a video replay attack after ARP cache poisoning has been achieved.

D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in jhttpd msp_info_htm function.

An issue was discovered in D-Link DIR-816 DIR-816A2_FWv1.10CNB05_R1B011D88210 The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

An arbitrary command injection vulnerability in the Cluster Server component of Veritas InfoScale allows an unauthenticated remote attacker to execute arbitrary commands as root or administrator. These Veritas products are affected: Access 7.4.2 and earlier, Access Appliance 7.4.2 and earlier, Flex Appliance 1.2 and earlier, InfoScale 7.3.1 and earlier, InfoScale between 7.4.0 and 7.4.1, Veritas Cluster Server (VCS) 6.2.1 and earlier on Linux/UNIX, Veritas Cluster Server (VCS) 6.1 and earlier on Windows, Storage Foundation HA (SFHA) 6.2.1 and earlier on Linux/UNIX, and Storage Foundation HA (SFHA) 6.1 and earlier on Windows.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a command execution vulnerability via the sub_41D998 function.

TOTOLINK A720R v4.1.5cu.470_B20200911 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a command execution vulnerability via the sub_4155DC function.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

TP-Link Tapo C200 IP camera, on its 1.1.15 firmware version and below, is affected by an unauthenticated RCE vulnerability, present in the uhttpd binary running by default as root. The exploitation of this vulnerability allows an attacker to take full control of the camera.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_41E588 function.

A specially crafted POST request to the ProGauge MAGLINK LX CONSOLE UTILITY sub-menu can allow a remote attacker to inject arbitrary commands.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR750 before 3.2.18.2, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, R7850 before 1.0.5.68, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.68, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, and XR1000 before 1.0.0.58.

An issue in the handler function in /goform/telnet of Tenda FH1201 v1.2.0.14 (408) allows attackers to execute arbitrary commands via a crafted HTTP request.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function usb_paswd.asp. This vulnerability allows attackers to execute arbitrary commands via the name parameter.

An issue in TOTOlink X6000R V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the setTracerouteCfg function of the stecgi.cgi component.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function httpd_debug.asp. This vulnerability allows attackers to execute arbitrary commands via the time parameter.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_411994 function.

Beijing Digital China Cloud Technology Co., Ltd. DCME-320 v.7.4.12.60 has a command execution vulnerability, which can be exploited to obtain device administrator privileges via the getVar function in the code/function/system/tool/ping.php file.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_412688 function.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_415498 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_41590C function.

SequenceServer lets you rapidly set up a BLAST+ server with an intuitive user interface for personal or group use. Several HTTP endpoints did not properly sanitize user input and/or query parameters. This could be exploited to inject and run unwanted shell commands. This vulnerability has been fixed in 3.1.2.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_422BD4 function.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6900P before 1.3.2.132, R7000P before 1.3.2.132, R7100LG before 1.0.0.64, WNDR3400v3 before 1.0.1.38, and XR300 before 1.0.3.56.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a command execution vulnerability via the sub_ The 416F60 function.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, EAX20 before 1.0.0.58, EAX80 before 1.0.1.68, LAX20 before 1.1.6.28, MR60 before 1.0.6.116, MR80 before 1.1.2.20, MS60 before 1.0.6.116, MS80 before 1.1.2.20, MK62 before 1.0.6.116, MK83 before 1.1.2.20, R6400 before 1.0.1.70, R6400v2 before 1.0.4.106, R6700v3 before 1.0.4.106, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, R7850 before 1.0.5.74, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, XR1000 before 1.0.0.58, and XR300 before 1.0.3.68.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.14, EX6100v2 before 1.0.1.98, EX6150v2 before 1.0.1.98, EX6250 before 1.0.0.132, EX6400 before 1.0.2.158, EX6400v2 before 1.0.0.132, EX6410 before 1.0.0.132, EX6420 before 1.0.0.132, EX7300 before 1.0.2.158, EX7300v2 before 1.0.0.132, EX7320 before 1.0.0.132, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, R7800 before 1.0.2.78, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V before 2.6.2.4, RBS50Y before 2.6.1.40, RBW30 before 2.6.2.2, and XR500 before 2.3.2.114.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK40 before 2.5.1.16, RBR40 before 2.5.1.16, RBS40 before 2.5.1.16, RBK20 before 2.5.1.16, RBR20 before 2.5.1.16, RBS20 before 2.5.1.16, RBK50 before 2.5.1.16, RBR50 before 2.5.1.16, RBS50 before 2.5.1.16, and RBS50Y before 2.6.1.40.

Remote Code Execution vulnerability in Micro Focus ArcSight Enterprise Security Manager (ESM) product, affecting versions 7.0.2 through 7.5. The vulnerability could be exploited resulting in remote code execution.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

An issue in TOTOlink X6000R V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the setLedCfg function.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the cmd parameter in the webcmd function.

An command injection vulnerability in Trend Micro Cloud Edge could allow a remote attacker to execute arbitrary code on affected appliances. Please note: authentication is not required in order to exploit this vulnerability.

Sourcecodester Poultry Farm Management System v1.0 contains an Unauthenticated Remote Code Execution (RCE) vulnerability via the productimage parameter at /farm/product.php.

HP OpenView Network Node Manager 6.2 through 7.50 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) node parameter to connectedNodes.ovpl, (2) cdpView.ovpl, (3) freeIPaddrs.ovpl, and (4) ecscmg.ovpl.

Multiple OS command injection vulnerabilities exist in the login.cgi set_sys_init() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger these vulnerabilities.A command injection vulnerability exists within the `restart_week_value` POST parameter.