In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function that when passed to the CsteSystem function creates a command execution vulnerability.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been classified as critical. Affected is the function SetWLanApcliSettings of the file wps.so. The manipulation of the argument PIN leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Byzoro Smart S45F Multi-Service Secure Gateway Intelligent Management Platform up to 20230906. Affected is an unknown function of the file /importexport.php. The manipulation of the argument sql leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-239358 is the identifier assigned to this vulnerability.

Totolink routers s X5000R V9.1.0u.6118_B20201102 and A7000R V9.1.0u.6115_B20201022 were discovered to contain a command injection vulnerability in the Tunnel 6in4 function via the remote6in4 parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175020.

Arris routers SBR-AC1900P 1.0.7-B05, SBR-AC3200P 1.0.7-B05 and SBR-AC1200P 1.0.5-B05 were discovered to contain a command injection vulnerability in the pptp function via the pptpUserName and pptpPassword parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Keijiban Tsumiki v1.15 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175022.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

Totolink X5000R_Firmware v9.1.0u.6118_B20201102 was discovered to contain a command injection vulnerability in the function setNtpCfg, via the tz parameters. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

Totolink A830R V5.9c.4729_B20191112, A3100R V4.1.2cu.5050_B20200504, A950RG V4.1.2cu.5161_B20200903, A800R V4.1.2cu.5137_B20200730, A3000RU V5.9c.5185_B20201128, and A810R V4.1.2cu.5182_B20201026 were discovered to contain a command injection vulnerability in the function setLanguageCfg, via the langType parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

An issue was discovered in the singleCrunch function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

An issue was discovered in the list function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

Contao Managed Edition v1.5.0 was discovered to contain a remote command execution (RCE) vulnerability via the component php_cli parameter.

The Cisco WAP4410N access point with firmware through 2.0.6.1, WRVS4400N router with firmware 1.x through 1.1.13 and 2.x through 2.0.2.1, and RVS4000 router with firmware through 2.0.3.2 allow remote attackers to read credential and configuration data, and execute arbitrary commands, via requests to the test interface on TCP port 32764, aka Bug IDs CSCum37566, CSCum43693, CSCum43700, and CSCum43685.

A vulnerability classified as critical has been found in TOTOLINK CA300-PoE 6.2c.884. This affects the function QuickSetting of the file ap.so. The manipulation of the argument hour/minute leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

An OS Command Injection in the CLI interface on DrayTek Vigor167 version 5.2.2, allows remote attackers to execute arbitrary system commands and escalate privileges via any account created within the web interface.

Multiple wireless router models from Sapido have an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. The affected models are out of support; replacing the device is recommended.

Totolink A830R V5.9c.4729_B20191112, A3100R V4.1.2cu.5050_B20200504, A950RG V4.1.2cu.5161_B20200903, A800R V4.1.2cu.5137_B20200730, A3000RU V5.9c.5185_B20201128, and A810R V4.1.2cu.5182_B20201026 were discovered to contain a command injection vulnerability in the function setWebWlanIdx, via the webWlanIdx parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted request.

An issue was discovered in the packageCmd function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

An os command injection vulnerability exists in the confsrv ucloud_add_new_node functionality of TCL LinkHub Mesh Wifi MS1G_00_01.00_14. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a malicious packet to trigger this vulnerability.

Versions of the package nemo-appium before 0.0.9 are vulnerable to Command Injection due to improper input sanitization in the 'module.exports.setup' function. **Note:** In order to exploit this vulnerability appium-running 0.1.3 has to be installed as one of nemo-appium dependencies.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not properly sanitize user input on several locations, which may allow an attacker to inject arbitrary commands.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

TinyCheck before commits 9fd360d and ea53de8 was vulnerable to command injection due to insufficient checks of input parameters in several places.

An arbitrary file writing vulnerability in the Secure PDF eXchange (SPX) feature of Sophos Firewall versions older than 21.0 MR2 (21.0.2) can lead to pre-auth remote code execution, if a specific configuration of SPX is enabled in combination with the firewall running in High Availability (HA) mode.

OS Command Injection in GitHub repository gogs/gogs prior to 0.12.11.

OS Command Injection in GitHub repository yogeshojha/rengine prior to 1.2.0.

An issue was discovered in the dump function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

OS Command Injection in GitHub repository gogs/gogs prior to 0.12.9.

QNAP QTS before 4.2.4 Build 20170313 allows attackers to gain administrator privileges and execute arbitrary commands via unspecified vectors.

A remote command execution vulnerability exists in gogs/gogs versions <=0.12.7 when deployed on a Windows server. The vulnerability arises due to improper validation of the `tree_path` parameter during file uploads. An attacker can set `tree_path=.git.` to upload a file into the .git directory, allowing them to write or rewrite the `.git/config` file. If the `core.sshCommand` is set, this can lead to remote command execution.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been rated as critical. Affected by this issue is the function setUpgradeUboot of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the ntpServIP parameter in the Time Settings.

Command Injection vulnerability in git-interface@2.1.1 in GitHub repository yarkeev/git-interface prior to 2.1.2. If both are provided by user input, then the use of a `--upload-pack` command-line argument feature of git is also supported for `git clone`, which would then allow for any operating system command to be spawned by the attacker.

An unauthenticated command-execution vulnerability exists in TerraMaster TOS through 4.2.06 via shell metacharacters in the Event parameter in include/makecvs.php during CSV creation.

TOTOLink A860R V4.1.2cu.5182_B20201027 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

TOTOLink T6 V5.9c.4085_B20190428 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

OS Command Injection in GitHub repository part-db/part-db prior to 0.5.11.

All versions of the package wifey are vulnerable to Command Injection via the connect() function due to improper input sanitization.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this issue is the function RP_checkFWByBBS of the file /goform/RP_checkFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

HGiga MailSherlock does not validate specific parameters properly. Attackers can use the vulnerability to launch Command inject attacks remotely and execute arbitrary commands of the system.

A vulnerability, which was classified as critical, was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected is the function wirelessAdvancedHidden of the file /goform/wirelessAdvancedHidden. The manipulation of the argument ExtChSelector/24GSelector/5GSelector leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations.

An issue was discovered in ClusterLabs Hawk 2.x through 2.3.0-x. There is a Ruby shell code injection issue via the hawk_remember_me_id parameter in the login_from_cookie cookie. The user logout routine could be used by unauthenticated remote attackers to execute code as hauser.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.