A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321.
A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.
A vulnerability in the Secure Sockets Layer (SSL) packet reassembly functionality of the detection engine in Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the detection engine to consume excessive system memory on an affected device, which could cause a denial of service (DoS) condition. The vulnerability is due to the affected software improperly handling changes to SSL connection states. An attacker could exploit this vulnerability by sending crafted SSL connections through an affected device. A successful exploit could allow the attacker to cause the detection engine to consume excessive system memory on the affected device, which could cause a DoS condition. The device may need to be reloaded manually to recover from this condition. This vulnerability affects Cisco Firepower System Software Releases 6.0.0 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Firewalls with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, Firepower 4100 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower 9300 Series Security Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower Threat Defense Virtual for VMware, Industrial Security Appliance 3000, Sourcefire 3D System Appliances. Cisco Bug IDs: CSCve23031.
A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly. The vulnerability is due to a lack of sufficient memory management protections under heavy SNMP polling loads. An attacker could exploit this vulnerability by sending a high rate of SNMP requests to the SNMP daemon through the management interface on an affected device. A successful exploit could allow the attacker to cause the SNMP daemon process to consume a large amount of system memory over time, which could then lead to an unexpected device restart, causing a denial of service (DoS) condition. This vulnerability affects all versions of SNMP.
A vulnerability in Cisco Aironet Access Point (AP) Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper handling of clients that are trying to connect to the AP. An attacker could exploit this vulnerability by sending authentication requests from multiple clients to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.
A vulnerability in the Secure Login Enhancements capability of Cisco Nexus 1000V Switch for VMware vSphere could allow an unauthenticated, remote attacker to cause an affected Nexus 1000V Virtual Supervisor Module (VSM) to become inaccessible to users through the CLI. The vulnerability is due to improper resource allocation during failed CLI login attempts when login parameters that are part of the Secure Login Enhancements capability are configured on an affected device. An attacker could exploit this vulnerability by performing a high amount of login attempts against the affected device. A successful exploit could cause the affected device to become inaccessible to other users, resulting in a denial of service (DoS) condition requiring a manual power cycle of the VSM to recover.
A vulnerability in the PROFINET handler for Link Layer Discovery Protocol (LLDP) messages of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a crash on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of LLDP messages in the PROFINET LLDP message handler. An attacker could exploit this vulnerability by sending a malicious LLDP message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.
A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI.
A vulnerability in the web interface of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition. Note: This vulnerability applies to IP Version 4 (IPv4) and IP Version 6 (IPv6) HTTP traffic.
A vulnerability in the implementation of the Border Gateway Protocol (BGP) module in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain BGP packets. An attacker could exploit this vulnerability by sending a crafted BGP packet. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
A vulnerability in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) on an affected device. The vulnerability is due to improper resource management while processing specific packets. An attacker could exploit this vulnerability by sending a series of crafted UDP packets to a specific port on an affected device. A successful exploit could either allow the attacker to tear down the connection between the AP and the wireless LAN controller, resulting in the affected device not being able to process client traffic, or cause the vulnerable device to reload, triggering a DoS condition. After the attack, the affected device should automatically recover its normal functions without manual intervention.
A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper validation of fields in Cisco SD-WAN peering messages that are encapsulated in UDP packets. An attacker could exploit this vulnerability by sending crafted UDP messages to the targeted system. A successful exploit could allow the attacker to cause services on the device to fail, resulting in a DoS condition that could impact the targeted device and other devices that depend on it.
A vulnerability in the WLAN Local Profiling feature of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect parsing of HTTP packets while performing HTTP-based endpoint device classifications. An attacker could exploit this vulnerability by sending a crafted HTTP packet to an affected device. A successful exploit could cause an affected device to reboot, resulting in a DoS condition.
A vulnerability in the OSPF Version 2 (OSPFv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation when the affected software processes certain OSPFv2 packets with Link-Local Signaling (LLS) data. An attacker could exploit this vulnerability by sending a malformed OSPFv2 packet to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.
Multiple vulnerabilities in the Media Gateway Control Protocol (MGCP) inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to inefficient memory management. An attacker could exploit these vulnerabilities by sending crafted MGCP packets through an affected device. An exploit could allow the attacker to cause memory exhaustion resulting in a restart of an affected device, causing a DoS condition for traffic traversing the device.
A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.
A vulnerability in the VPN System Logging functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak that can deplete system memory over time, which can cause unexpected system behaviors or device crashes. The vulnerability is due to the system memory not being properly freed for a VPN System Logging event generated when a VPN session is created or deleted. An attacker could exploit this vulnerability by repeatedly creating or deleting a VPN tunnel connection, which could leak a small amount of system memory for each logging event. A successful exploit could allow the attacker to cause system memory depletion, which can lead to a systemwide denial of service (DoS) condition. The attacker does not have any control of whether VPN System Logging is configured or not on the device, but it is enabled by default.
A vulnerability in the implementation of Multiprotocol Border Gateway Protocol (MP-BGP) for the Layer 2 VPN (L2VPN) Ethernet VPN (EVPN) address family in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of Border Gateway Protocol (BGP) update messages that contain crafted EVPN attributes. An attacker could exploit this vulnerability by sending BGP update messages with specific, malformed attributes to an affected device. A successful exploit could allow the attacker to cause an affected device to crash, resulting in a DoS condition.
Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities.
A vulnerability in the IP fragment-handling implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. This memory leak could prevent traffic from being processed through the device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper error handling when specific failures occur during IP fragment reassembly. An attacker could exploit this vulnerability by sending crafted, fragmented IP traffic to a targeted device. A successful exploit could allow the attacker to continuously consume memory on the affected device and eventually impact traffic, resulting in a DoS condition. The device could require a manual reboot to recover from the DoS condition. Note: This vulnerability applies to both IP Version 4 (IPv4) and IP Version 6 (IPv6) traffic.
A vulnerability in the IP Address Resolution Protocol (ARP) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers with a 20-Gbps Embedded Services Processor (ESP) installed could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service condition. The vulnerability is due to insufficient error handling when an affected device has reached platform limitations. An attacker could exploit this vulnerability by sending a malicious series of IP ARP messages to an affected device. A successful exploit could allow the attacker to exhaust system resources, which would eventually cause the affected device to reload.
A vulnerability in the Umbrella Connector component of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches could allow an unauthenticated, remote attacker to trigger a reload, resulting in a denial of service condition on an affected device. The vulnerability is due to insufficient error handling when parsing DNS requests. An attacker could exploit this vulnerability by sending a series of malicious DNS requests to an Umbrella Connector client interface of an affected device. A successful exploit could allow the attacker to cause a crash of the iosd process, which triggers a reload of the affected device.
A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust memory resources on the affected device, leading to a denial of service (DoS) condition. The vulnerability is due to improper resource management for inbound SSL/TLS connections. An attacker could exploit this vulnerability by establishing multiple SSL/TLS connections with specific conditions to the affected device. A successful exploit could allow the attacker to exhaust the memory on the affected device, causing the device to stop accepting new SSL/TLS connections and resulting in a DoS condition for services on the device that process SSL/TLS traffic. Manual intervention is required to recover an affected device.
A vulnerability in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust process memory of an affected device. The vulnerability is due to insufficient queue management for Internet Group Management Protocol (IGMP) packets. An attacker could exploit this vulnerability by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to cause memory exhaustion, resulting in instability of other processes. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address this vulnerability.
A vulnerability in the SSL VPN negotiation process for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to inefficient direct memory access (DMA) memory management during the negotiation phase of an SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted Datagram TLS (DTLS) traffic to an affected device. A successful exploit could allow the attacker to exhaust DMA memory on the device and cause a DoS condition.
A vulnerability in the licensing service of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition.The vulnerability is due to improper handling of system resource values by the affected system. An attacker could exploit this vulnerability by sending malicious requests to the targeted system. A successful exploit could allow the attacker to cause the affected system to become unresponsive, resulting in a DoS condition and preventing the management of dependent devices.
A vulnerability in the DHCP module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to incorrect processing of certain DHCP packets. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
A vulnerability in the resource handling system of Cisco NX-OS Software for Cisco MDS 9000 Series Multilayer Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper resource usage control. An attacker could exploit this vulnerability by sending traffic to the management interface (mgmt0) of an affected device at very high rates. An exploit could allow the attacker to cause unexpected behaviors such as high CPU usage, process crashes, or even full system reboots of an affected device.
A vulnerability in the Cisco Discovery Protocol of Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of certain Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending certain Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DOS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
A vulnerability in the SSL/TLS session handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak when closing SSL/TLS connections in a specific state. An attacker could exploit this vulnerability by establishing several SSL/TLS sessions and ensuring they are closed under certain conditions. A successful exploit could allow the attacker to exhaust memory resources in the affected device, which would prevent it from processing new SSL/TLS connections, resulting in a DoS. Manual intervention is required to recover an affected device.
The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.
A vulnerability in the TCP state machine of Cisco RF Gateway 1 devices could allow an unauthenticated, remote attacker to prevent an affected device from delivering switched digital video (SDV) or video on demand (VoD) streams, resulting in a denial of service (DoS) condition. The vulnerability is due to a processing error with TCP connections to the affected device. An attacker could exploit this vulnerability by establishing a large number of TCP connections to an affected device and not actively closing those TCP connections. A successful exploit could allow the attacker to prevent the affected device from delivering SDV or VoD streams to set-top boxes. Cisco Bug IDs: CSCvf19887.
A vulnerability in Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient limitations on the number of connections that can be made to the affected software. An attacker could exploit this vulnerability by opening multiple connections to the server and exhausting server resources. A successful exploit could cause the server to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvf41006.
A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition.
A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to insufficient resource management while establishing SSL VPN sessions. An attacker could exploit this vulnerability by sending a series of crafted HTTPS requests to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the Cisco Fabric Services over IP (CFSoIP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of incoming CFSoIP packets. An attacker could exploit this vulnerability by sending crafted CFSoIP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
A vulnerability in the NETCONF over SSH feature of Cisco IOS XE Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to insufficient resource management. An attacker could exploit this vulnerability by initiating a large number of NETCONF over SSH connections. A successful exploit could allow the attacker to exhaust resources, causing the device to reload and resulting in a DoS condition on an affected device.
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default.
A vulnerability in the Virtual Shell (VSH) session management for Cisco NX-OS Software could allow an authenticated, remote attacker to cause a VSH process to fail to delete upon termination. This can lead to a build-up of VSH processes that overtime can deplete system memory. When there is no system memory available, this can cause unexpected system behaviors and crashes. The vulnerability is due to the VSH process not being properly deleted when a remote management connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly performing a remote management connection to the device and terminating the connection in an unexpected manner. A successful exploit could allow the attacker to cause the VSH processes to fail to delete, which can lead to a system-wide denial of service (DoS) condition. The attacker must have valid user credentials to log in to the device using the remote management connection.
A vulnerability in the cryptographic driver for Cisco Adaptive Security Appliance Software (ASA) and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reboot unexpectedly. The vulnerability is due to incomplete input validation of a Secure Sockets Layer (SSL) or Transport Layer Security (TLS) ingress packet header. An attacker could exploit this vulnerability by sending a crafted TLS/SSL packet to an interface on the targeted device. An exploit could allow the attacker to cause the device to reload, which will result in a denial of service (DoS) condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is required to exploit this vulnerability.
A vulnerability in the processing of IP Service Level Agreement (SLA) packets by Cisco IOS Software and Cisco IOS XE software could allow an unauthenticated, remote attacker to cause an interface wedge and an eventual denial of service (DoS) condition on the affected device. The vulnerability is due to improper socket resources handling in the IP SLA responder application code. An attacker could exploit this vulnerability by sending crafted IP SLA packets to an affected device. An exploit could allow the attacker to cause an interface to become wedged, resulting in an eventual denial of service (DoS) condition on the affected device.
A vulnerability in the interactions between the DHCP and TFTP features for Cisco Small Business 300 Series (Sx300) Managed Switches could allow an unauthenticated, remote attacker to cause the device to become low on system memory, which in turn could lead to an unexpected reload of the device and result in a denial of service (DoS) condition on an affected device. The vulnerability is due to a failure to free system memory when an unexpected DHCP request is received. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the targeted device. A successful exploit could allow the attacker to cause an unexpected reload of the device.
Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.
A vulnerability in the email parsing module Clam AntiVirus (ClamAV) Software versions 0.102.0, 0.101.4 and prior could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to inefficient MIME parsing routines that result in extremely long scan times of specially formatted email files. An attacker could exploit this vulnerability by sending a crafted email file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process to scan the crafted email file indefinitely, resulting in a denial of service condition.
A vulnerability in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains crafted EVPN attributes. An attacker could indirectly exploit the vulnerability by sending BGP EVPN update messages with a specific, malformed attribute to an affected system and waiting for a user on the device to display the EVPN operational routes’ status. If successful, the attacker could cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.
A vulnerability in the Decryption Policy Default Action functionality of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to bypass a configured drop policy and allow traffic onto the network that should have been denied. The vulnerability is due to the incorrect handling of SSL-encrypted traffic when Decrypt for End-User Notification is disabled in the configuration. An attacker could exploit this vulnerability by sending a SSL connection through the affected device. A successful exploit could allow the attacker to bypass a configured drop policy to block specific SSL connections. Releases 10.1.x and 10.5.x are affected.