A NULL pointer dereference issue was found in the ACPI code of QEMU. A malicious, privileged user within the guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition.

A NULL pointer dereference in Busybox's man applet leads to denial of service when a section name is supplied but no page argument is given

An issue was discovered in the Linux kernel through 5.11.11. synic_get in arch/x86/kvm/hyperv.c has a NULL pointer dereference for certain accesses to the SynIC Hyper-V context, aka CID-919f4ebc5987.

A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because pci_get_bus() might not return a valid pointer.

fdctrl_write_data in hw/block/fdc.c in QEMU 5.0.0 has a NULL pointer dereference via a NULL block pointer for the current drive.

A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while processing read/write ioport commands if the selected floppy drive is not initialized with a block device. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

QEMU (aka Quick Emulator), when built with the IDE disk and CD/DVD-ROM Emulator support, allows local guest OS privileged users to cause a denial of service (NULL pointer dereference and QEMU process crash) by flushing an empty CDROM device drive.

An issue was discovered in Xen through 4.14.x. When a Xenstore watch fires, the xenstore client that registered the watch will receive a Xenstore message containing the path of the modified Xenstore entry that triggered the watch, and the tag that was specified when registering the watch. Any communication with xenstored is done via Xenstore messages, consisting of a message header and the payload. The payload length is limited to 4096 bytes. Any request to xenstored resulting in a response with a payload longer than 4096 bytes will result in an error. When registering a watch, the payload length limit applies to the combined length of the watched path and the specified tag. Because watches for a specific path are also triggered for all nodes below that path, the payload of a watch event message can be longer than the payload needed to register the watch. A malicious guest that registers a watch using a very large tag (i.e., with a registration operation payload length close to the 4096 byte limit) can cause the generation of watch events with a payload length larger than 4096 bytes, by writing to Xenstore entries below the watched path. This will result in an error condition in xenstored. This error can result in a NULL pointer dereference, leading to a crash of xenstored. A malicious guest administrator can cause xenstored to crash, leading to a denial of service. Following a xenstored crash, domains may continue to run, but management operations will be impossible. Only C xenstored is affected, oxenstored is not affected.

SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.

QEMU (aka Quick Emulator) built with the TPR optimization for 32-bit Windows guests support is vulnerable to a null pointer dereference flaw. It occurs while doing I/O port write operations via hmp interface. In that, 'current_cpu' remains null, which leads to the null pointer dereference. A user or process could use this flaw to crash the QEMU instance, resulting in DoS issue.

QEMU (aka Quick Emulator) built with an IDE AHCI emulation support is vulnerable to a null pointer dereference flaw. It occurs while unmapping the Frame Information Structure (FIS) and Command List Block (CLB) entries. A privileged user inside guest could use this flaw to crash the QEMU process instance resulting in DoS.

QEMU (aka Quick Emulator) built with the USB EHCI emulation support is vulnerable to a null pointer dereference flaw. It could occur when an application attempts to write to EHCI capabilities registers. A privileged user inside quest could use this flaw to crash the QEMU process instance resulting in DoS.

The ohci_bus_start function in the USB OHCI emulation support (hw/usb/hcd-ohci.c) in QEMU allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors related to multiple eof_timers.

Redis is an in-memory database that persists on disk. Prior to versions 6.2.7 and 7.0.0, an attacker attempting to load a specially crafted Lua script can cause NULL pointer dereference which will result with a crash of the redis-server process. The problem is fixed in Redis versions 7.0.0 and 6.2.7. An additional workaround to mitigate this problem without patching the redis-server executable, if Lua scripting is not being used, is to block access to `SCRIPT LOAD` and `EVAL` commands using ACL rules.

Nullptr dereference when a null char is present in a proto symbol. The symbol is parsed incorrectly, leading to an unchecked call into the proto file's name during generation of the resulting error message. Since the symbol is incorrectly parsed, the file is nullptr. We recommend upgrading to version 3.15.0 or greater.

Vixie Cron before the 3.0pl1-133 Debian package allows local users to cause a denial of service (daemon crash) via a large crontab file because the calloc return value is not checked.

The MSI-X MMIO support in hw/pci/msix.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (NULL pointer dereference and QEMU process crash) by leveraging failure to define the .write method.

The ahci_commit_buf function in ide/ahci.c in QEMU allows attackers to cause a denial of service (NULL dereference) when the command header 'ad->cur_cmd' is null.

MariaDB through 10.5.9 allows an application crash in sub_select_postjoin_aggr for a NULL value of aggr.

hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check before an ide_cancel_dma_sync call.

In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer dereference.

An issue was discovered in OpenEXR before 2.5.2. An invalid tiled input file could cause invalid memory access in TiledInputFile::TiledInputFile() in IlmImf/ImfTiledInputFile.cpp, as demonstrated by a NULL pointer dereference.

A null pointer dereference flaw was found in samba's Winbind service in versions before 4.11.15, before 4.12.9 and before 4.13.1. A local user could use this flaw to crash the winbind service causing denial of service.

ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.

A NULL pointer dereference in sanei_epson_net_read in SANE Backends before 1.0.30 allows a malicious device connected to the same local network as the victim to cause a denial of service, aka GHSL-2020-075.

The sosendto function in slirp/udp.c in QEMU before 2.1.2 allows local users to cause a denial of service (NULL pointer dereference) by sending a udp packet with a value of 0 in the source port and address, which triggers access of an uninitialized socket.

There is a flaw in polkit which can allow an unprivileged user to cause polkit to crash, due to process file descriptor exhaustion. The highest threat from this vulnerability is to availability. NOTE: Polkit process outage duration is tied to the failing process being reaped and a new one being spawned

In Qemu 3.0.0, lsi_do_msgin in hw/scsi/lsi53c895a.c allows out-of-bounds access by triggering an invalid msg_len value.

In ImfChromaticities.cpp routine RGBtoXYZ(), there are some division operations such as `float Z = (1 - chroma.white.x - chroma.white.y) * Y / chroma.white.y;` and `chroma.green.y * (X + Z))) / d;` but the divisor is not checked for a 0 value. A specially crafted file could trigger a divide-by-zero condition which could affect the availability of programs linked with OpenEXR.

A memory leak flaw was found in the Linux kernel in the ccp_run_aes_gcm_cmd() function in drivers/crypto/ccp/ccp-ops.c, which allows attackers to cause a denial of service (memory consumption). This vulnerability is similar with the older CVE-2019-18808.

An out-of-bounds memory access flaw was found in the ATI VGA device emulation of QEMU. This flaw occurs in the ati_2d_blt() routine while handling MMIO write operations when the guest provides invalid values for the destination display parameters. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service.

Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime.

The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).

The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.

A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a single, large transfer request, to reduce the overhead and improve performance. The combined size of the bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a denial of service.

An integer overflow was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions prior to 6.1.0. The issue occurs while handling a "PVRDMA_REG_DSRHIGH" write from the guest due to improper input validation. This flaw allows a privileged guest user to make QEMU allocate a large amount of memory, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

A flaw double-free memory corruption in the Linux kernel HCI device initialization subsystem was found in the way user attach malicious HCI TTY Bluetooth device. A local user could use this flaw to crash the system. This flaw affects all the Linux kernel versions starting from 3.13.

The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).

A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions prior to 6.1.0. The issue occurs while handling a "PVRDMA_REG_DSRHIGH" write from the guest and may result in a crash of QEMU or cause undefined behavior due to the access of an uninitialized pointer. The highest threat from this vulnerability is to system availability.

A flaw was found in the QEMU virtual crypto device while handling data encryption/decryption requests in virtio_crypto_handle_sym_req. There is no check for the value of `src_len` and `dst_len` in virtio_crypto_sym_op_helper, potentially leading to a heap buffer overflow when the two values differ.

A DMA reentrancy issue leading to a use-after-free error was found in the e1000e NIC emulation code in QEMU. This issue could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.

Stack-based buffer overflow in hw/scsi/scsi-bus.c in QEMU, when built with SCSI-device emulation support, allows guest OS users with CAP_SYS_RAWIO permissions to cause a denial of service (instance crash) via an invalid opcode in a SCSI command descriptor block.

An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.

The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).

A stack overflow vulnerability was found in the Intel HD Audio device (intel-hda) of QEMU. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition. The highest threat from this vulnerability is to system availability. This flaw affects QEMU versions prior to 7.0.0.

Memory leak in QEMU (aka Quick Emulator), when built with USB EHCI Emulation support, allows local guest OS privileged users to cause a denial of service (memory consumption) by repeatedly hot-unplugging the device.

An issue was discovered in fs/fuse/fuse_i.h in the Linux kernel before 5.11.8. A "stall on CPU" can occur because a retry loop continually finds the same bad inode, aka CID-775c5033a0d1.

An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said issue while updating controller state fields and their subsequent processing. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.