Some HTTP/2 implementations are vulnerable to a flood of empty frames, potentially leading to a denial of service. The attacker sends a stream of frames with an empty payload and without the end-of-stream flag. These frames can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends time processing each frame disproportionate to attack bandwidth. This can consume excess CPU.

Multipart form parsing can consume large amounts of CPU and memory when processing form inputs containing very large numbers of parts. This stems from several causes: 1. mime/multipart.Reader.ReadForm limits the total memory a parsed multipart form can consume. ReadForm can undercount the amount of memory consumed, leading it to accept larger inputs than intended. 2. Limiting total memory does not account for increased pressure on the garbage collector from large numbers of small allocations in forms with many parts. 3. ReadForm can allocate a large number of short-lived buffers, further increasing pressure on the garbage collector. The combination of these factors can permit an attacker to cause an program that parses multipart forms to consume large amounts of CPU and memory, potentially resulting in a denial of service. This affects programs that use mime/multipart.Reader.ReadForm, as well as form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. With fix, ReadForm now does a better job of estimating the memory consumption of parsed forms, and performs many fewer short-lived allocations. In addition, the fixed mime/multipart.Reader imposes the following limits on the size of parsed forms: 1. Forms parsed with ReadForm may contain no more than 1000 parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxparts=. 2. Form parts parsed with NextPart and NextRawPart may contain no more than 10,000 header fields. In addition, forms parsed with ReadForm may contain no more than 10,000 header fields across all parts. This limit may be adjusted with the environment variable GODEBUG=multipartmaxheaders=.

Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.35 and 3.6.7, there is a potential vulnerability in Traefik ACME TLS certificates' automatic generation: the ACME TLS-ALPN fast path can allow unauthenticated clients to tie up go routines and file descriptors indefinitely when the ACME TLS challenge is enabled. A malicious client can open many connections, send a minimal ClientHello with acme-tls/1, then stop responding, leading to denial of service of the entry point. The vulnerability is fixed in 2.11.35 and 3.6.7.

Some HTTP/2 implementations are vulnerable to a settings flood, potentially leading to a denial of service. The attacker sends a stream of SETTINGS frames to the peer. Since the RFC requires that the peer reply with one acknowledgement per SETTINGS frame, an empty SETTINGS frame is almost equivalent in behavior to a ping. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.

Undici is an HTTP/1.1 client for Node.js. Prior to 7.18.0 and 6.23.0, the number of links in the decompression chain is unbounded and the default maxHeaderSize allows a malicious server to insert thousands compression steps leading to high CPU usage and excessive memory allocation. This vulnerability is fixed in 7.18.0 and 6.23.0.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, specially crafted traffic can cause Suricata to consume large amounts of memory while parsing DNP3 traffic. This can lead to the process slowing down and running out of memory, potentially leading to it getting killed by the OOM killer. Versions 8.0.3 or 7.0.14 contain a patch. As a workaround, disable the DNP3 parser in the suricata yaml (disabled by default).

Connections received from the proxy port may not count towards total accepted connections, resulting in server crashes if the total number of connections exceeds available resources. This only applies to connections accepted from the proxy port, pending the proxy protocol header.

Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB.

In Django 3.2 before 3.2.17, 4.0 before 4.0.9, and 4.1 before 4.1.6, the parsed values of Accept-Language headers are cached in order to avoid repetitive parsing. This leads to a potential denial-of-service vector via excessive memory usage if the raw value of Accept-Language headers is very large.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 8.0 before 18.6.6, 18.7 before 18.7.4, and 18.8 before 18.8.4 that, under certain conditions could have allowed an unauthenticated user to cause denial of service by uploading malicious files.

Allocation of Resources Without Limits or Throttling in the HDF5 weight loading component in Google Keras 3.0.0 through 3.13.0 on all platforms allows a remote attacker to cause a Denial of Service (DoS) through memory exhaustion and a crash of the Python interpreter via a crafted .keras archive containing a valid model.weights.h5 file whose dataset declares an extremely large shape.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.7 before 18.7.4, and 18.8 before 18.8.4 that could have allowed an unauthenticated user to cause denial of service through CPU exhaustion by submitting specially crafted markdown files that trigger exponential processing in markdown preview.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.3 before 18.6.4, 18.7 before 18.7.2, and 18.8 before 18.8.2 that could have allowed an unauthenticated user to create a denial of service condition by sending repeated malformed SSH authentication requests.

Varnish Cache before 7.3.2 and 7.4.x before 7.4.3 (and before 6.0.13 LTS), and Varnish Enterprise 6 before 6.0.12r6, allows credits exhaustion for an HTTP/2 connection control flow window, aka a Broke Window Attack.

The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.

An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). If a high rate of specific valid packets are processed by the routing engine (RE) this will lead to a loss of connectivity of the RE with other components of the chassis and thereby a complete and persistent system outage. Please note that a carefully designed lo0 firewall filter will block or limit these packets which should prevent this issue from occurring. The following log messages can be seen when this issue occurs: <host> kernel: nf_conntrack: nf_conntrack: table full, dropping packet This issue affects Juniper Networks Junos OS Evolved: * All versions earlier than 20.4R3-S7-EVO; * 21.2R1-EVO and later versions; * 21.4-EVO versions earlier than 21.4R3-S5-EVO; * 22.1-EVO versions earlier than 22.1R3-S2-EVO; * 22.2-EVO versions earlier than 22.2R3-EVO; * 22.3-EVO versions earlier than 22.3R2-EVO; * 22.4-EVO versions earlier than 22.4R2-EVO.

A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS).

Due to insufficient length validation in the Open5GS GTP library versions prior to versions 2.4.13 and 2.5.7, when parsing extension headers in GPRS tunneling protocol (GPTv1-U) messages, a protocol payload with any extension header length set to zero causes an infinite loop. The affected process becomes immediately unresponsive, resulting in denial of service and excessive resource consumption. CVSS3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C

An Allocation of Resources Without Limits or Throttling vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). On QFX10K Series, Inter-Chassis Control Protocol (ICCP) is used in MC-LAG topologies to exchange control information between the devices in the topology. ICCP connection flaps and sync issues will be observed due to excessive specific traffic to the local device. This issue affects Juniper Networks Junos OS on QFX10K Series: * All versions prior to 20.2R3-S7; * 20.4 versions prior to 20.4R3-S4; * 21.1 versions prior to 21.1R3-S3; * 21.2 versions prior to 21.2R3-S1; * 21.3 versions prior to 21.3R3; * 21.4 versions prior to 21.4R3; * 22.1 versions prior to 22.1R2.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 10.8 before 18.6.6, 18.7 before 18.7.4, and 18.8 before 18.8.4 that, under certain conditions, could have allowed an unauthenticated user to cause denial of service by sending repeated GraphQL queries.

IBM Security Guardium Big Data Intelligence 4.0 (SonarG) does not properly restrict the size or amount of resources that are requested or influenced by an actor. This weakness can be used to consume more resources than intended. IBM X-Force ID: 161417.

Denial of Service issue in GraphQL endpoints in Gitlab EE/CE affecting all versions from 11.10 prior to 18.2.7, 18.3 prior to 18.3.3, and 18.4 prior to 18.4.1 allows unauthenticated users to potentially bypass query complexity limits leading to resource exhaustion and service disruption.

There is a resource management error vulnerability in eCNS280_TD V100R005C10SPC650. An attacker needs to perform specific operations to exploit the vulnerability on the affected device. Due to improper resource management of the function, the vulnerability can be exploited to cause service abnormal on affected devices.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 13.2. When querying the repository branches through API, GitLab was ignoring a query parameter and returning a considerable amount of results.

In BIP-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when OCSP authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An issue was discovered in Foxit PhantomPDF before 8.3.12. It allows memory consumption because data is created for each page of an application level.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a request to be crafted in such a way that an AIOHTTP server's memory fills up uncontrollably during processing. If an application includes a handler that uses the Request.post() method, an attacker may be able to freeze the server by exhausting the memory. This issue is fixed in version 3.13.3.

FreshRSS is a free, self-hostable RSS aggregator. From version 1.27.0 to before 1.28.0, An attacker could globally deny access to feeds via proxy modifying to 429 Retry-After for a large list of feeds on given instance, making it unusable for majority of users. This issue has been patched in version 1.28.0.

AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.

CoreDNS is a DNS server that chains plugins. Prior to version 1.14.0, multiple CoreDNS server implementations (gRPC, HTTPS, and HTTP/3) lack critical resource-limiting controls. An unauthenticated remote attacker can exhaust memory and degrade or crash the server by opening many concurrent connections, streams, or sending oversized request bodies. The issue is similar in nature to CVE-2025-47950 (QUIC DoS) but affects additional server types that do not enforce connection limits, stream limits, or message size constraints. Version 1.14.0 contains a patch.

Signal K Server is a server application that runs on a central hub in a boat. A Denial of Service (DoS) vulnerability in versions prior to 2.19.0 allows an unauthenticated attacker to crash the SignalK Server by flooding the access request endpoint (`/signalk/v1/access/requests`). This causes a "JavaScript heap out of memory" error due to unbounded in-memory storage of request objects. Version 2.19.0 fixes the issue.

A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader.

XWiki is an open-source wiki software platform. Versions 16.10.10 and below, 17.0.0-rc-1 through 17.4.3 and 17.5.0-rc-1 through 17.6.0 contain a REST API which doesn't enforce any limits for the number of items that can be requested in a single request at the moment. Depending on the number of pages in the wiki and the memory configuration, this can lead to slowness and unavailability of the wiki. As an example, the /rest/wikis/xwiki/spaces resource returns all spaces on the wiki by default, which are basically all pages. This issue is fixed in versions 17.4.4 and 16.10.11.

The orjson.dumps function in orjson thru 3.11.4 does not limit recursion for deeply nested JSON documents.

Crash in USB HID dissector in Wireshark 3.4.0 to 3.4.2 allows denial of service via packet injection or crafted capture file

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Http4s before versions 0.21.17, 0.22.0-M2, and 1.0.0-M14 have a vulnerability which can lead to a denial-of-service. Blaze-core, a library underlying http4s-blaze-server, accepts connections unboundedly on its selector pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. http4s provides a general "MaxActiveRequests" middleware mechanism for limiting open connections, but it is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. In 0.21.17, 0.22.0-M2, and 1.0.0-M14, a new "maxConnections" property, with a default value of 1024, has been added to the `BlazeServerBuilder`. Setting the value to a negative number restores unbounded behavior, but is strongly disrecommended. The NIO2 backend does not respect `maxConnections`. Its use is now deprecated in http4s-0.21, and the option is removed altogether starting in http4s-0.22. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xhv5-w9c5-2r2w.

In doInBackground of NotificationContentInflater.java, there is a possible temporary denial or service due to long running operations. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-252766417

urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.24 and prior to 2.6.0, the number of links in the decompression chain was unbounded allowing a malicious server to insert a virtually unlimited number of compression steps leading to high CPU usage and massive memory allocation for the decompressed data. This vulnerability is fixed in 2.6.0.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.

It was found in Moodle before version 3.10.1, 3.9.4, 3.8.7 and 3.5.16 that messaging did not impose a character limit when sending messages, which could result in client-side (browser) denial of service for users receiving very large messages.

On WAGO PFC200 devices in different firmware versions with special crafted packets an attacker with network access to the device could cause a denial of service for the login service of the runtime.

A vulnerability in the web UI of Cisco Umbrella could allow an unauthenticated, remote attacker to negatively affect the performance of this service. The vulnerability exists due to insufficient rate limiting controls in the web UI. An attacker could exploit this vulnerability by sending crafted HTTPS packets at a high and sustained rate. A successful exploit could allow the attacker to negatively affect the performance of the web UI. Cisco has addressed this vulnerability.

A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM &amp; Presence Service (Unified CM IM&amp;P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&amp;P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&amp;P users who were authenticated prior to an attack.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

CNCF Envoy through 1.13.0 may consume excessive amounts of memory when proxying HTTP/1.1 requests or responses with many small (i.e. 1 byte) chunks.

CiphertextHeader.java in Cryptacular 1.2.3, as used in Apereo CAS and other products, allows attackers to trigger excessive memory allocation during a decode operation, because the nonce array length associated with "new byte" may depend on untrusted input within the header of encoded data.

Bugsink is a self-hosted error tracking tool. In versions prior to 2.0.6, a specially crafted Brotli-compressed envelope can cause Bugsink to spend excessive CPU time in decompression, leading to denial of service. This can be done if the DSN is known, which it is in many common setups (JavaScript, Mobile Apps). The issue is patched in Bugsink 2.0.6. The vulnerability is similar to, but distinct from, another brotli-related problem in Bugsink, GHSA-fc2v-vcwj-269v/CVE-2025-64508.

HashiCorp Nomad and Nonad Enterprise up to 0.10.2 HTTP/RPC services allowed unbounded resource usage, and were susceptible to unauthenticated denial of service. Fixed in 0.10.3.

joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. In versions from 1.3.3 to before 1.3.5 and from 1.4.0 to before 1.4.2, the ExceededSizeError exception messages are embedded with non-decoded JWT token parts and may cause Python logging to record an arbitrarily large, forged JWT payload. In situations where a misconfigured — or entirely absent — production-grade web server sits in front of a Python web application, an attacker may be able to send arbitrarily large bearer tokens in the HTTP request headers. When this occurs, Python logging or diagnostic tools (e.g., Sentry) may end up processing extremely large log messages containing the full JWT header during the joserfc.jwt.decode() operation. The same behavior also appears when validating claims and signature payload sizes, as the library raises joserfc.errors.ExceededSizeError() with the full payload embedded in the exception message. Since the payload is already fully loaded into memory at this stage, the library cannot prevent or reject it. This issue has been patched in versions 1.3.5 and 1.4.2.