IBM Spectrum Protect Client 8.1.0.0 through 8.1.14.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 225886.

The ax25_getname function in net/ax25/af_ax25.c in the Linux kernel before 2.6.37-rc2 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory by reading a copy of this structure.

IBM Emptoris Services Procurement 10.0.0.5 could allow a local user to view sensitive information stored locally due to improper access control. IBM X-Force ID: 128106.

arch/x86/kvm/x86.c in the Linux kernel before 2.6.36.2 does not initialize certain structure members, which allows local users to obtain potentially sensitive information from kernel stack memory via read operations on the /dev/kvm device.

net/core/ethtool.c in the Linux kernel before 2.6.36 does not initialize certain data structures, which allows local users to obtain potentially sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability for an ethtool ioctl call.

The bcm_connect function in net/can/bcm.c (aka the Broadcast Manager) in the Controller Area Network (CAN) implementation in the Linux kernel 2.6.36 and earlier creates a publicly accessible file with a filename containing a kernel memory address, which allows local users to obtain potentially sensitive information about kernel memory use by listing this filename.

The snd_hdsp_hwdep_ioctl function in sound/pci/rme9652/hdsp.c in the Linux kernel before 2.6.36-rc6 does not initialize a certain structure, which allows local users to obtain potentially sensitive information from kernel stack memory via an SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctl call.

An out-of-bounds read vulnerability was found in the SR-IPv6 implementation in the Linux kernel. The flaw exists within the processing of seg6 attributes. The issue results from the improper validation of user-supplied data, which can result in a read past the end of an allocated buffer. This flaw allows a privileged local user to disclose sensitive information on affected installations of the Linux kernel.

The actions implementation in the network queueing functionality in the Linux kernel before 2.6.36-rc2 does not properly initialize certain structure members when performing dump operations, which allows local users to obtain potentially sensitive information from kernel memory via vectors related to (1) the tcf_gact_dump function in net/sched/act_gact.c, (2) the tcf_mirred_dump function in net/sched/act_mirred.c, (3) the tcf_nat_dump function in net/sched/act_nat.c, (4) the tcf_simp_dump function in net/sched/act_simple.c, and (5) the tcf_skbedit_dump function in net/sched/act_skbedit.c.

The xfs_ioc_fsgetxattr function in fs/xfs/linux-2.6/xfs_ioctl.c in the Linux kernel before 2.6.36-rc4 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an ioctl call.

The eql_g_master_cfg function in drivers/net/eql.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an EQL_GETMASTRCFG ioctl call.

IBM Spectrum Protect Operations Center 8.1.12 and 8.1.13 could allow a local attacker to obtain sensitive information, caused by plain text user account passwords potentially being stored in the browser's application command history. By accessing browser history, an attacker could exploit this vulnerability to obtain other user accounts' passwords. IBM X-Force ID: 226322.

IBM UrbanCode Deploy (UCD) 6.2.7.15, 7.0.5.10, 7.1.2.6, and 7.2.2.1 could disclose sensitive database information to a local user in plain text. IBM X-Force ID: 221008.

IBM Spectrum Copy Data Management Admin 2.2.0.0 through 2.2.15.0 could allow a local attacker to bypass authentication restrictions, caused by the lack of proper session management. An attacker could exploit this vulnerability to bypass authentication and gain unauthorized access to the Spectrum Copy Data Management catalog which contains metadata. IBM X-Force ID: 223718.

The hso_get_count function in drivers/net/usb/hso.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a TIOCGICOUNT ioctl call.

The cxgb_extension_ioctl function in drivers/net/cxgb3/cxgb3_main.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via a CHELSIO_GET_QSET_NUM ioctl call.

The tcf_act_police_dump function in net/sched/act_police.c in the actions implementation in the network queueing functionality in the Linux kernel before 2.6.36-rc4 does not properly initialize certain structure members, which allows local users to obtain potentially sensitive information from kernel memory via vectors involving a dump operation. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-2942.

The cfg80211_wext_giwessid function in net/wireless/wext-compat.c in the Linux kernel before 2.6.36-rc3-next-20100831 does not properly initialize certain structure members, which allows local users to leverage an off-by-one error in the ioctl_standard_iw_point function in net/wireless/wext-core.c, and obtain potentially sensitive information from kernel heap memory, via vectors involving an SIOCGIWESSID ioctl call that specifies a large buffer size.

The xfs_swapext function in fs/xfs/xfs_dfrag.c in the Linux kernel before 2.6.35 does not properly check the file descriptors passed to the SWAPEXT ioctl, which allows local users to leverage write access and obtain read access by swapping one file into another file.

IBM Lotus Notes 7.0, 8.0, and 8.5 stores administrative credentials in cleartext in SURunAs.exe, which allows local users to obtain sensitive information by examining this file, aka SPR JSTN837SEG.

The btrfs_ioctl_clone function in fs/btrfs/ioctl.c in the btrfs functionality in the Linux kernel 2.6.29 through 2.6.32, and possibly other versions, does not ensure that a cloned file descriptor has been opened for reading, which allows local users to read sensitive information from a write-only file descriptor.

IBM GSKit (IBM DB2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, and 11.1) uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 139073.

The tcf_fill_node function in net/sched/cls_api.c in the netlink subsystem in the Linux kernel 2.6.x before 2.6.32-rc5, and 2.4.37.6 and earlier, does not initialize a certain tcm__pad2 structure member, which might allow local users to obtain sensitive information from kernel memory via unspecified vectors. NOTE: this issue exists because of an incomplete fix for CVE-2005-4881.

The tc_fill_tclass function in net/sched/sch_api.c in the tc subsystem in the Linux kernel 2.4.x before 2.4.37.6 and 2.6.x before 2.6.31-rc9 does not initialize certain (1) tcm__pad1 and (2) tcm__pad2 structure members, which might allow local users to obtain sensitive information from kernel memory via unspecified vectors.

IBM WebSphere Application Server (WAS) 6.1 before 6.1.0.27, and 7.0 before 7.0.0.7, does not properly handle an exception occurring after use of wsadmin scripts and configuration of JAAS-J2C Authentication Data, which allows local users to obtain sensitive information by reading the First Failure Data Capture (FFDC) log file.

arch/x86/ia32/ia32entry.S in the Linux kernel before 2.6.31.4 on the x86_64 platform does not clear certain kernel registers before a return to user mode, which allows local users to read register values from an earlier process by switching an ia32 process to 64-bit mode.

The mm_for_maps function in fs/proc/base.c in the Linux kernel 2.6.30.4 and earlier allows local users to read (1) maps and (2) smaps files under proc/ via vectors related to ELF loading, a setuid process, and a race condition.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in smb2_reconnect_server() The UAF bug is due to smb2_reconnect_server() accessing a session that is already being teared down by another thread that is executing __cifs_put_smb_ses(). This can happen when (a) the client has connection to the server but no session or (b) another thread ends up setting @ses->ses_status again to something different than SES_EXITING. To fix this, we need to make sure to unconditionally set @ses->ses_status to SES_EXITING and prevent any other threads from setting a new status while we're still tearing it down. The following can be reproduced by adding some delay to right after the ipc is freed in __cifs_put_smb_ses() - which will give smb2_reconnect_server() worker a chance to run and then accessing @ses->ipc: kinit ... mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10 [disconnect srv] ls /mnt/1 &>/dev/null sleep 30 kdestroy [reconnect srv] sleep 10 umount /mnt/1 ... CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Workqueue: cifsiod smb2_reconnect_server [cifs] RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0 Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75 7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8 RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83 RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800 RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000 R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000 FS: 0000000000000000(0000) GS:ffff888157c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x36/0x90 ? exc_general_protection+0x1c1/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? __list_del_entry_valid_or_report+0x33/0xf0 __cifs_put_smb_ses+0x1ae/0x500 [cifs] smb2_reconnect_server+0x4ed/0x710 [cifs] process_one_work+0x205/0x6b0 worker_thread+0x191/0x360 ? __pfx_worker_thread+0x10/0x10 kthread+0xe2/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In IOMMU, there is a possible information disclosure due to improper input validation. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: DTV03692061; Issue ID: DTV03692061.

In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588569; Issue ID: ALPS07588552.

In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588413; Issue ID: ALPS07588453.

In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588569; Issue ID: ALPS07628518.

In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588413; Issue ID: ALPS07588436.

In wlan, there is a possible out of bounds read due to an integer overflow. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588383; Issue ID: ALPS07588383.

In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588569; Issue ID: ALPS07588569.

UCM-CQ in IBM Rational ClearCase 7.0.0.x before 7.0.0.5, 7.0.1.x before 7.0.1.4, and 7.1.x before 7.1.0.1 on Linux and AIX places a username and password on the command line, which allows local users to obtain credentials by listing the process.

The sock_getsockopt function in net/core/sock.c in the Linux kernel before 2.6.28.6 does not initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel memory via an SO_BSDCOMPAT getsockopt request.

WSPolicy in the Web Services component in IBM WebSphere Application Server (WAS) 7.0.x before 7.0.0.1 does not properly recognize the IDAssertion.isUsed binding property, which allows local users to discover a password by reading a SOAP message.

IBM WebSphere Message Broker 6.1.x before 6.1.0.2 writes a database connection password to the Event Log and System Log during exception handling for a JDBC error, which allows local users to obtain sensitive information by reading these logs.

Overlayfs did not properly perform permission checking when copying up files in an overlayfs and could be exploited from within a user namespace, if, for example, unprivileged user namespaces were allowed. It was possible to have a file not readable by an unprivileged user to be copied to a mountpoint controlled by the user, like a removable device. This was introduced in kernel version 4.19 by commit d1d04ef ("ovl: stack file ops"). This was fixed in kernel version 5.8 by commits 56230d9 ("ovl: verify permissions in ovl_path_open()"), 48bd024 ("ovl: switch to mounter creds in readdir") and 05acefb ("ovl: check permission to open real file"). Additionally, commits 130fdbc ("ovl: pass correct flags for opening real directory") and 292f902 ("ovl: call secutiry hook in ovl_real_ioctl()") in kernel 5.8 might also be desired or necessary. These additional commits introduced a regression in overlay mounts within user namespaces which prevented access to files with ownership outside of the user namespace. This regression was mitigated by subsequent commit b6650da ("ovl: do not fail because of O_NOATIMEi") in kernel 5.11.

The Workplace (aka WP) component in IBM FileNet P8 Application Engine (P8AE) 3.5.1 before 3.5.1-010 records DEBUG messages containing user credentials in the log4j.xml file, which might allow local users to obtain sensitive information by reading this file.

IBM i Access 7.1 on Windows allows local users to discover registry passwords via unspecified vectors.

IBM Informix Dynamic Server (IDS) before 9.40.xC8 and 10.00 before 10.00.xC4 stores passwords in plaintext in shared memory, which allows local users to obtain passwords by reading the memory (product defects 171893, 171894, 173772).

The waitid implementation in kernel/exit.c in the Linux kernel through 4.13.4 accesses rusage data structures in unintended cases, which allows local users to obtain sensitive information, and bypass the KASLR protection mechanism, via a crafted system call.

net/ipv4/af_inet.c in Linux kernel 2.4 does not clear sockaddr_in.sin_zero before returning IPv4 socket names from the (1) getsockname, (2) getpeername, and (3) accept functions, which allows local users to obtain portions of potentially sensitive memory.

IBM Lotus Connections 2.x before 2.0.1 stores the password for the administrative user in the trace.log file, which allows local users to obtain sensitive information by reading this file. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

IBM DB2 for Linux, UNIX and Windows 11.1 (includes DB2 Connect Server) under unusual circumstances, could expose highly sensitive information in the error log to a local user.

The sg_ioctl function in drivers/scsi/sg.c in the Linux kernel before 4.13.4 allows local users to obtain sensitive information from uninitialized kernel heap-memory locations via an SG_GET_REQUEST_TABLE ioctl call for /dev/sg0.

The move_pages system call in mm/migrate.c in the Linux kernel before 4.12.9 doesn't check the effective uid of the target process, enabling a local attacker to learn the memory layout of a setuid executable despite ASLR.

The atyfb_ioctl function in drivers/video/fbdev/aty/atyfb_base.c in the Linux kernel through 4.12.10 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory by reading locations associated with padding bytes.