The Log WP_Mail WordPress plugin through 0.1 saves sent email in a publicly accessible directory using predictable filenames, allowing any unauthenticated visitor to obtain potentially sensitive information like generated passwords.

Certain Canon devices manufactured in 2012 through 2020 (such as imageRUNNER ADVANCE iR-ADV C5250), when Catwalk Server is enabled for HTTP access, allow remote attackers to modify an e-mail address setting, and thus cause the device to send sensitive information through e-mail to the attacker. For example, an incoming FAX may be sent through e-mail to the attacker. This occurs when a PIN is not required for General User Mode, as exploited in the wild in August 2021.

adminlte is vulnerable to Sensitive Cookie Without 'HttpOnly' Flag

An Insecure Permissions issue in jeecg-boot 2.4.5 allows unauthenticated remote attackers to gain escalated privilege and view sensitive information via the httptrace interface.

The Correos Express addon for PrestaShop 1.6 through 1.7 allows remote attackers to obtain sensitive information, such as a service's owner password that can be used to modify orders via SOAP. Attackers can also retrieve information about orders or buyers.

When a certificate and its private key are installed in the Windows machine certificate store using Network and Security tool, access rights to the private key are unnecessarily granted to the operator group. * Installations based on Panorama Suite 2025 (25.00.004) are vulnerable unless update PS-2500-00-0357 (or higher) is installed * Installations based on Panorama Suite 2025 Updated Dec. 25 (25.10.007) are not vulnerable Please refer to security bulletin BS-036, available on the Panorama CSIRT website: https://my.codra.net/en-gb/csirt.

ZITADEL is an open source identity management platform. From 2.71.11 to before 3.4.10 and 4.15.0, a vulnerability was discovered in Zitadel's LDAP identity provider implementation, which fails to properly escape user-provided usernames before incorporating them into LDAP search filters. This allows unauthenticated attackers to perform LDAP Filter Injection during the login process. While this vulnerability does not allow for a full authentication bypass, an attacker can use LDAP metacharacters (such as *, (, )) to perform blind LDAP injection. By observing the different failure (or success) responses, an attacker can systematically enumerate valid usernames and extract sensitive attribute data from the connected LDAP directory. This vulnerability is fixed in 3.4.10 and 4.15.0.

Shopware is an open source eCommerce platform. In versions prior to 6.4.1.1 private files publicly accessible with Cloud Storage providers when the hashed URL is known. Users are recommend to first change their configuration to set the correct visibility according to the documentation. The visibility must be at the same level as `type`. When the Storage is saved on Amazon AWS we recommending disabling public access to the bucket containing the private files: https://docs.aws.amazon.com/AmazonS3/latest/userguide/access-control-block-public-access.html. Otherwise, update to Shopware 6.4.1.1 or install or update the Security plugin (https://store.shopware.com/en/detail/index/sArticle/518463/number/Swag136939272659) and run the command `./bin/console s3:set-visibility` to correct your cloud file visibilities.

ldapauth-fork before 2.3.3 allows remote attackers to perform LDAP injection attacks via a crafted username.

A flaw was found in tripleo-ansible version as shipped in Red Hat Openstack 16.1. The Ansible log file is readable to all users during stack update and creation. The highest threat from this vulnerability is to data confidentiality.

Froxlor through 0.9.39.5 has Incorrect Access Control for tickets not owned by the current user.

SEPPmail Secure Email Gateway before version 15.0.3 allows attackers with a specially crafted email address to read the contents of emails encrypted for other users.

An insecure permissions in /Taier/API/tenant/listTenant interface in DTStack Taier 1.3.0 allows attackers to view sensitive information via the getCookie method.

BTCPay Server through 1.0.7.0 could allow a remote attacker to obtain sensitive information, caused by failure to set the HTTPOnly flag for a cookie.

Vulnerability in the Oracle User Management product of Oracle E-Business Suite (component: Search and Register Users). Supported versions that are affected are 12.2.4-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle User Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle User Management accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).

Improper permission settings for mobile applications (com.transsion.carlcare) may lead to information leakage risk.

Broadcom RAID Controller web interface is vulnerable due to Improper permissions on the log file

Insecure Permissions vulnerability in CMSimple v.5.16 allows a remote attacker to obtain sensitive information via a crafted script to the Functionality of downloading php backup files.

In multiple managed switches by WAGO in different versions special crafted requests can lead to cookies being transferred to third parties.

Incorrect permission assignment for critical resource vulnerability in GroupSession Free edition ver5.1.1 and earlier, GroupSession byCloud ver5.1.1 and earlier, and GroupSession ZION ver5.1.1 and earlier allows a remote unauthenticated attacker to access arbitrary files on the server and obtain sensitive information via unspecified vectors.

IBM Planning Analytics 2.0 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 198755.

IBM Guardium Data Encryption (GDE) 3.0.0.3 and 4.0.0.4 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 196218.

IBM Jazz Team Server 6.0.6, 6.0.6.1, 7.0, 7.0.1, and 7.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 194891.

viewvc 1.0.3 allows improper access control to files in a repository when using the "forbidden" configuration option.

IBM Security SiteProtector System 3.1.1 could allow a remote attacker to obtain sensitive information, caused by missing 'HttpOnly' flag. A remote attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 174129.

IBM Security Information Queue (ISIQ) 1.0.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4, and 1.0.5 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 176332.

IBM Cloud Pak for Security 1.3.0.1(CP4S) could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie.

A vulnerability in the application policy configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data on an affected device. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data.

Insecure permissions exist for configd.socket in OPNsense Community Edition before 23.7 and Business Edition before 23.4.2.

An issue was discovered in Weblib Ucopia before 6.0.13. The SSH Server has Insecure Permissions.

OPNsense Community Edition before 23.7 and Business Edition before 23.4.2 was discovered to contain insecure permissions in the directory /tmp.

NMIS/BioDose V22.02 and previous version installations where the embedded Microsoft SQLServer Express is used are exposed in the Windows share accessed by clients in networked installs. By default, this directory has insecure directory paths that allow access to the SQL Server database and configuration files, which can contain sensitive data.

A regression in the fix for bug 66512 in Apache Tomcat 11.0.0-M5, 10.1.8, 9.0.74 and 8.5.88 meant that, if a response did not include any HTTP headers no AJP SEND_HEADERS messare woudl be sent for the response which in turn meant that at least one AJP proxy (mod_proxy_ajp) would use the response headers from the previous request leading to an information leak.

The Active Directory Integration / LDAP Integration plugin for WordPress is vulnerable to LDAP Injection in versions up to, and including, 4.1.5. This is due to insufficient escaping on the supplied username value. This makes it possible for attackers, with an existing account on a vulnerable WordPress instance, to extract potentially sensitive information from the LDAP directory.

Baker Hughes – Bently Nevada 3500 System TDI Firmware version 5.05 contains a vulnerability in their password retrieval functionality which could allow an attacker to access passwords stored on the device.

NVIDIA DGX A100 BMC contains a vulnerability where an attacker may cause an LDAP user injection. A successful exploit of this vulnerability may lead to information disclosure.

An insecure permissions issue was discovered in GitLab Community and Enterprise Edition 9.4 and later but before 11.4.13, 11.5.x before 11.5.6, and 11.6.x before 11.6.1. The runner registration token in the CI/CD settings could not be reset. This was a security risk if one of the maintainers leaves the group and they know the token.

In handleBondStateChanged of AdapterService.java, there is a possible unapproved data access due to a missing permission check. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.

Android 1.0 through 9.0 has Insecure Permissions. The Android bug ID is 77286983.

A vulnerability in the Policy and Charging Rules Function (PCRF) of the Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The attacker would also have to have access to the internal VLAN where CPS is deployed. The vulnerability is due to incorrect permissions of certain system files and not sufficiently protecting sensitive data that is at rest. An attacker could exploit the vulnerability by using certain tools available on the internal network interface to request and view system files. An exploit could allow the attacker to find out sensitive information about the application. Cisco Bug IDs: CSCvf77666.

Palo Alto Networks Terminal Services (aka TS) Agent 6.0, 7.0, and 8.0 before 8.0.1 uses weak permissions for unspecified resources, which allows attackers to obtain sensitive session information via unknown vectors.

cPanel before 88.0.3 has weak permissions (world readable) for the proxy subdomains log file (SEC-558).

The window management module lacks permission verification.Successful exploitation of this vulnerability may affect confidentiality.

An issue was discovered in GitLab Community and Enterprise Edition 11.3 through 12.4 when moving an issue to a public project from a private one. It has Insecure Permissions.

An issue was discovered in GitLab Community and Enterprise Edition 8.17 through 12.4 in the Search feature provided by Elasticsearch integration.. It has Insecure Permissions (issue 1 of 4).

An issue was discovered in GitLab Community and Enterprise Edition 11.3 to 12.3 in the protected environments feature. It has Insecure Permissions (issue 3 of 4).

A sensitive information disclosure vulnerability in Kyland KPS2204 6 Port Managed Din-Rail Programmable Serial Device Servers Software Version:R0002.P05 allows remote attackers to get username and password by request /cgi-bin/webadminget.cgi script via the browser.

An information disclosure vulnerability exists in the cookie functionality of WWBN AVideo 11.6 and dev master commit 3f7c0364. The session cookie and the pass cookie miss the HttpOnly flag, making them accessible via JavaScript. The session cookie also misses the secure flag, which allows the session cookie to be leaked over non-HTTPS connections. This could allow an attacker to steal the session cookie via crafted HTTP requests.This vulnerability is for the pass cookie, which contains the hashed password and can be leaked via JavaScript.

An information disclosure vulnerability exists in the cookie functionality of WWBN AVideo 11.6 and dev master commit 3f7c0364. The session cookie and the pass cookie miss the HttpOnly flag, making them accessible via JavaScript. The session cookie also misses the secure flag, which allows the session cookie to be leaked over non-HTTPS connections. This could allow an attacker to steal the session cookie via crafted HTTP requests.This vulnerabilty is for the session cookie which can be leaked via JavaScript.

OvalEdge 5.2.8.0 and earlier is affected by a Sensitive Data Exposure vulnerability via a GET request to /user/getUserWithTeam. Authentication is required. The information disclosed is associated with all registered user ID numbers.