Insecure Permissions vulnerability in CMSimple v.5.16 allows a remote attacker to obtain sensitive information via a crafted script to the Functionality of downloading php backup files.

An issue was discovered in certain Apple products. iOS before 11 is affected. The issue involves the "Security" component. It allows attackers to track users across installs via a crafted app that leverages Keychain data mishandling.

VMware Xenon 1.x, prior to 1.5.4-CR7_1, 1.5.7_7, 1.5.4-CR6_2, 1.3.7-CR1_2, 1.1.0-CR0-3, 1.1.0-CR3_1,1.4.2-CR4_1, and 1.5.4_8, contains an authentication bypass vulnerability due to insufficient access controls for utility endpoints. Successful exploitation of this issue may result in information disclosure.

An incorrect permission assignment for critical resource vulnerability [CWE-732] in FortiClient for Linux version 6.0.8 and below, 6.2.9 and below, 6.4.7 and below, 7.0.2 and below may allow an unauthenticated attacker to access sensitive information in log files and directories via symbolic links.

Improper Permissions Handling in the Portal on FiberHome LM53Q1 VH519R05C01S38 devices (intended for obtaining information about Internet Usage, Changing Passwords, etc.) allows remote attackers to look for the information without authenticating. The information includes Version of device, Firmware ID, Connected users to device along their MAC Addresses, etc.

Bolt before 3.3.6 does not properly restrict access to _profiler routes, related to EventListener/ProfilerListener.php and Provider/EventListenerServiceProvider.php.

Scubez Posty Readymade Classifieds has Incorrect Access Control for visiting admin/user_activate_submit.php (aka the backend PHP script), which might allow remote attackers to obtain sensitive information via a direct request.

IBM Jazz Team Server 6.0.6, 6.0.6.1, 7.0, 7.0.1, and 7.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 209057.

Certain Canon devices manufactured in 2012 through 2020 (such as imageRUNNER ADVANCE iR-ADV C5250), when Catwalk Server is enabled for HTTP access, allow remote attackers to modify an e-mail address setting, and thus cause the device to send sensitive information through e-mail to the attacker. For example, an incoming FAX may be sent through e-mail to the attacker. This occurs when a PIN is not required for General User Mode, as exploited in the wild in August 2021.

This vulnerability exists in SyroTech SY-GPON-1110-WDONT Router due to missing HTTPOnly flag for the session cookies associated with the router's web management interface. An attacker with remote access could exploit this by intercepting transmission within an HTTP session on the vulnerable system. Successful exploitation of this vulnerability could allow the attacker to capture cookies and obtain sensitive information on the targeted system.

adminlte is vulnerable to Sensitive Cookie Without 'HttpOnly' Flag

An Insecure Permissions issue in jeecg-boot 2.4.5 and earlier allows remote attackers to gain escalated privilege and view sensitive information via api uri: /sys/user/querySysUser?username=admin.

An Insecure Permissions issue in jeecg-boot 2.4.5 and earlier allows remote attackers to gain escalated privilege and view sensitive information via api uri: api uri:/sys/user/checkOnlyUser?username=admin.

A flaw was found in tripleo-ansible version as shipped in Red Hat Openstack 16.1. The Ansible log file is readable to all users during stack update and creation. The highest threat from this vulnerability is to data confidentiality.

The Debian courier-authlib package before 0.71.1-2 for Courier Authentication Library creates a /run/courier/authdaemon directory with weak permissions, allowing an attacker to read user information. This may include a cleartext password in some configurations. In general, it includes the user's existence, uid and gids, home and/or Maildir directory, quota, and some type of password information (such as a hash).

Broadcom RAID Controller web interface is vulnerable due to Improper permissions on the log file

In multiple managed switches by WAGO in different versions special crafted requests can lead to cookies being transferred to third parties.

IBM Jazz Team Server 6.0.6, 6.0.6.1, 7.0, 7.0.1, and 7.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 194891.

EisBaer Scada - CWE-732: Incorrect Permission Assignment for Critical Resource

BMC Control-M/Agent 7.0.00.000 has Insecure Password Storage.

An issue was discovered in GitLab Community and Enterprise Edition 11.3 to 12.3 in the protected environments feature. It has Insecure Permissions (issue 3 of 4).

An issue was discovered in GitLab Community and Enterprise Edition 11.3 through 12.4 when moving an issue to a public project from a private one. It has Insecure Permissions.

An issue was discovered in GitLab Community and Enterprise Edition 8.17 through 12.4 in the Search feature provided by Elasticsearch integration.. It has Insecure Permissions (issue 1 of 4).

Vulnerability of permissions being not strictly verified in the WMS module. Successful exploitation of this vulnerability may affect service confidentiality.

Limesurvey before 3.17.14 uses an anti-CSRF cookie without the HttpOnly flag, which allows attackers to access a cookie value via a client-side script.

SilverStripe through 4.3.3 has incorrect access control for protected files uploaded via Upload::loadIntoFile(). An attacker may be able to guess a filename in silverstripe/assets via the AssetControlExtension.

In Perun before version 3.9.1, VO or group manager can modify configuration of the LDAP extSource to retrieve all from Perun LDAP. Issue is fixed in version 3.9.1 by sanitisation of the input.

BigAnt Server v5.6.06 was discovered to contain an incorrect access control issue.

Incorrect Permission Assignment for Critical Resource, Improper Control of Dynamically-Managed Code Resources vulnerability in Apache Solr. This issue affects Apache Solr: from 8.10.0 through 8.11.2, from 9.0.0 before 9.3.0. The Schema Designer was introduced to allow users to more easily configure and test new Schemas and configSets. However, when the feature was created, the "trust" (authentication) of these configSets was not considered. External library loading is only available to configSets that are "trusted" (created by authenticated users), thus non-authenticated users are unable to perform Remote Code Execution. Since the Schema Designer loaded configSets without taking their "trust" into account, configSets that were created by unauthenticated users were allowed to load external libraries when used in the Schema Designer. Users are recommended to upgrade to version 9.3.0, which fixes the issue.

An insecure permissions in /Taier/API/tenant/listTenant interface in DTStack Taier 1.3.0 allows attackers to view sensitive information via the getCookie method.

Philips e-Alert Unit (non-medical device), Version R2.1 and prior. The software, upon installation, sets incorrect permissions for an object that exposes it to an unintended actor.

An issue was discovered in shadow 4.5. newgidmap (in shadow-utils) is setuid and allows an unprivileged user to be placed in a user namespace where setgroups(2) is permitted. This allows an attacker to remove themselves from a supplementary group, which may allow access to certain filesystem paths if the administrator has used "group blacklisting" (e.g., chmod g-rwx) to restrict access to paths. This flaw effectively reverts a security feature in the kernel (in particular, the /proc/self/setgroups knob) to prevent this sort of privilege escalation.

IBM Security Information Queue (ISIQ) 1.0.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4, and 1.0.5 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 176332.

IBM Security SiteProtector System 3.1.1 could allow a remote attacker to obtain sensitive information, caused by missing 'HttpOnly' flag. A remote attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 174129.

An insecure permissions issue was discovered in GitLab Community and Enterprise Edition 9.4 and later but before 11.4.13, 11.5.x before 11.5.6, and 11.6.x before 11.6.1. The runner registration token in the CI/CD settings could not be reset. This was a security risk if one of the maintainers leaves the group and they know the token.

The window management module lacks permission verification.Successful exploitation of this vulnerability may affect confidentiality.

A vulnerability in the Gleez CMS 1.2.0 login page could allow an unauthenticated, remote attacker to perform multiple user enumerations, which can further help an attacker to perform login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side access control and login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Portal login page. An exploit could allow the attacker to identify existing users and perform brute-force password attacks on the Portal, as demonstrated by navigating to the user/4 URI.

Insecure permissions in Lone Wolf Technologies loadingDOCS 2018-08-13 allow remote attackers to download any confidential files via https requests for predictable URLs.

An issue was discovered in BTITeam XBTIT 2.5.4. When a user logs in, their password hash is rehashed using a predictable salt and stored in the "pass" cookie, which is not flagged as HTTPOnly. Due to the weak and predictable salt that is in place, an attacker who successfully steals this cookie can efficiently brute-force it to retrieve the user's cleartext password.

A vulnerability in the application policy configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data on an affected device. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data.

Incorrect access control in the /mysql/api/droboapp/data endpoint in Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to retrieve the MySQL database root password.

IBM Cloud Pak for Security 1.3.0.1(CP4S) could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie.

Froxlor through 0.9.39.5 has Incorrect Access Control for tickets not owned by the current user.

IBM Security Directory Integrator 7.2.0 and IBM Security Verify Directory Integrator 10.0.0 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 228587.

An information disclosure vulnerability exists in the cookie functionality of WWBN AVideo 11.6 and dev master commit 3f7c0364. The session cookie and the pass cookie miss the HttpOnly flag, making them accessible via JavaScript. The session cookie also misses the secure flag, which allows the session cookie to be leaked over non-HTTPS connections. This could allow an attacker to steal the session cookie via crafted HTTP requests.This vulnerability is for the pass cookie, which contains the hashed password and can be leaked via JavaScript.

In universal forwarder versions before 9.0, management services are available remotely by default. When not required, it introduces a potential exposure, but it is not a vulnerability. If exposed, we recommend each customer assess the potential severity specific to your environment. In 9.0, the universal forwarder now binds the management port to localhost preventing remote logins by default. If management services are not required in versions before 9.0, set disableDefaultPort = true in server.conf OR allowRemoteLogin = never in server.conf OR mgmtHostPort = localhost in web.conf. See Configure universal forwarder management security (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation#Configure_universal_forwarder_management_security) for more information on disabling the remote management services.

An issue was discovered in Weblib Ucopia before 6.0.13. The SSH Server has Insecure Permissions.

Insufficient access control in /api/external/7.0/system.System.get_infos in Seagate NAS OS version 4.3.15.1 allows attackers to obtain information about the NAS without authentication via empty POST requests.

An information disclosure vulnerability exists in the cookie functionality of WWBN AVideo 11.6 and dev master commit 3f7c0364. The session cookie and the pass cookie miss the HttpOnly flag, making them accessible via JavaScript. The session cookie also misses the secure flag, which allows the session cookie to be leaked over non-HTTPS connections. This could allow an attacker to steal the session cookie via crafted HTTP requests.This vulnerabilty is for the session cookie which can be leaked via JavaScript.

Sensitive information disclosure due to insecure folder permissions. The following products are affected: Acronis Cyber Protect 15 (Linux) before build 29240, Acronis Agent (Linux) before build 28037