An attacker sending specially crafted data packets to the Mobile Device Server can cause memory corruption which could result to a Denial of Service (DoS) or code execution.

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (setDoubleL2tpConfig->guest_ip_check(overflow arg: mask) modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects DC112A before 1.0.0.52, R6400 before 1.0.1.68, RAX200 before 1.0.3.106, WNDR3400v3 before 1.0.1.38, XR300 before 1.0.3.68, R8500 before 1.0.2.144, RAX75 before 1.0.3.106, R8300 before 1.0.2.144, and RAX80 before 1.0.3.106.

FreeType 2 before 2017-03-08 has an out-of-bounds write caused by a heap-based buffer overflow related to the TT_Get_MM_Var function in truetype/ttgxvar.c and the sfnt_init_face function in sfnt/sfobjs.c.

FFmpeg before 2017-02-07 has an out-of-bounds write caused by a heap-based buffer overflow related to the decode_frame function in libavcodec/pictordec.c.

An unauthenticated attacker can trigger a stack based buffer overflow in the DP Service (TCP port 3500). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.

LibreOffice before 2017-03-11 has an out-of-bounds write caused by a heap-based buffer overflow in the SVMConverter::ImplConvertFromSVM1 function in vcl/source/gdi/svmconverter.cxx.

Tenda AC Series Router AC11_V02.03.01.104_CN was discovered to contain a stack buffer overflow in the wifiBasicCfg module. This vulnerability allows attackers to cause a Denial of Service (DoS) via crafted overflow data.

D-LINK DI-8003 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function.

Tenda AC6 v2.0 v15.03.06.50 was discovered to contain a buffer overflow in the function 'fromSetSysTime.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6260 before 1.1.0.76, R6800 before 1.2.0.62, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, and AC2600 before 1.2.0.62.

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (setDoublePppoeConfig->guest_ip_check(overflow arg: mask) modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50

gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing '\0' character.

An issue was discovered in the nix crate 0.16.0 and later before 0.20.2, 0.21.x before 0.21.2, and 0.22.x before 0.22.2 for Rust. unistd::getgrouplist has an out-of-bounds write if a user is in more than 16 /etc/groups groups.

Stack-based Buffer Overflow vulnerability in Shenzhen Tenda Technology Co Tenda AC6V2 (fromAdvSetLanip(overflow arg:lanMask) modules) allows Overflow Buffers.This issue affects Tenda AC6V2: through 15.03.06.50

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function modifyAccPwdRegister.

Tenda AC Series Router AC11_V02.03.01.104_CN was discovered to contain a stack buffer overflow in the onlineList module. This vulnerability allows attackers to cause a Denial of Service (DoS) via crafted overflow data.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.74, D8500 before 1.0.3.60, DC112A before 1.0.0.56, R6300v2 before 1.0.4.50, R6400 before 1.0.1.68, R7000 before 1.0.11.116, R7100LG before 1.0.0.70, RBS40V before 2.6.2.8, RBW30 before 2.6.2.2, RS400 before 1.5.1.80, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.

NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.66, D6400 before 1.0.0.100, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.52, DGN2200v4 before 1.0.0.118, EAX80 before 1.0.1.64, R6250 before 1.0.4.48, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R7960P before 1.4.1.64, R8000 before 1.0.4.62, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, R6400v2 before 1.0.4.106, R7000P before 1.3.2.132, R8000P before 1.4.1.64, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, R6700v3 before 1.0.4.106, R6900P before 1.3.2.132, R7900P before 1.4.1.64, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.3.106.

Multiple models of the Uniview IP Camera (e.g., IPC_G6103 B6103.16.10.B25.201218, IPC_G61, IPC21, IPC23, IPC32, IPC36, IPC62, and IPC_HCMN) offer an undocumented UDP service on port 7788 that allows a remote unauthenticated attacker to overflow an internal buffer and achieve code execution. By using this buffer overflow, a remote attacker can start the telnetd service. This service has a hardcoded default username and password (root/123456). Although it has a restrictive shell, this can be easily bypassed via the built-in ECHO shell command.

Asus RT-AC68U <3.0.0.4.385.20633 and RT-AC5300 <3.0.0.4.384.82072 are affected by a buffer overflow in blocking_request.cgi.

TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formSetLg.

There is a stack buffer overflow vulnerability in the formSetPPTPServer function of Tenda-AX3 router V16.03.12.10_CN. The v10 variable is directly retrieved from the http request parameter startIp. Then v10 will be splice to stack by function sscanf without any security check,which causes stack overflow. By POSTing the page /goform/SetPptpServerCfg with proper startIp, the attacker can easily perform remote code execution with carefully crafted overflow data.

The boa httpd of Trendnet TEW-820AP 1.01.B01 has a stack overflow vulnerability in /boafrm/formIPv6Addr, /boafrm/formIpv6Setup, /boafrm/formDnsv6. The reason is that the check of ipv6 address is not sufficient, which allows attackers to construct payloads for attacks.

Dnsmasq 2.86 has a heap-based buffer overflow in check_bad_address (called from check_for_bogus_wildcard and FuzzCheckForBogusWildcard). NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge.

Buffer Overflow vulnerability in Vigor2620/LTE200 3.9.8.9 and earlier and Vigor2860/2925 3.9.8 and earlier and Vigor2862/2926 3.9.9.5 and earlier and Vigor2133/2762/2832 3.9.9 and earlier and Vigor165/166 4.2.7 and earlier and Vigor2135/2765/2766 4.4.5.1 and earlier and Vigor2865/2866/2927 4.4.5.3 and earlier and Vigor2962/3910 4.3.2.8/4.4.3.1 and earlier and Vigor3912 4.3.6.1 and earlier allows a remote attacker to execute arbitrary code via the CGI parser's handling of the "Content-Length" header of HTTP POST requests.

Artifex MuJS v1.1.3 was discovered to contain a heap buffer overflow which is caused by conflicting JumpList of nested try/finally statements.

Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.

thttpd 2007 has buffer underflow.

Dnsmasq 2.86 has a heap-based buffer overflow in answer_request (called from FuzzAnswerTheRequest and fuzz_rfc1035.c). NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge.

Mozilla Network Security Services (NSS) before 3.21.4, 3.22.x through 3.28.x before 3.28.4, 3.29.x before 3.29.5, and 3.30.x before 3.30.1 allows remote attackers to cause a denial of service (out-of-bounds write) or possibly have unspecified other impact by leveraging incorrect base64 operations.

Two Buffer Overflow vulnerabilities exists in T10 V2_Firmware V4.1.8cu.5207_B20210320 in the http_request_parse function when processing host data in the HTTP request process.

H3C GR-1200W MiniGRW1A0V100R006 was discovered to contain a stack overflow via the function version_set.

A Stack-based Buffer Overflow vulnerability exists in the Tenda AC15 V15.03.05.18_multi device via the list parameter in a post request in goform/SetIpMacBind.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

An exploitable stack buffer overflow vulnerability exists in the MQTT packet parsing functionality of Cesanta Mongoose 6.8. A specially crafted MQTT SUBSCRIBE packet can cause a stack buffer overflow resulting in remote code execution. An attacker needs to send a specially crafted MQTT packet over the network to trigger this vulnerability.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 via the /cloud_config/router_post/check_reset_pwd_verify_code interface.

Buffer Overflow vulnerability in SunBK201 umicat through v.0.3.2 and fixed in v.0.3.3 allows an attacker to execute arbitrary code via the power(uct_int_t x, uct_int_t n) in src/uct_upstream.c.

An exploitable code execution vulnerability exists in the SavePatientMontage functionality of Natus Xltek NeuroWorks 8. A specially crafted network packet can cause a stack buffer overflow resulting in code execution. An attacker can a malicious packet to trigger this vulnerability.

Extreme Networks IQ Engine before 10.6r1a, and through 10.6r4 before 10.6r5, has a buffer overflow. This issue arises from the ah_webui service, which listens on TCP port 3009 by default.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reset_pwd_veirfy_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

An issue was discovered in MBed OS 6.16.0. When parsing hci reports, the hci parsing software dynamically determines the length of a list of reports by reading a byte from an input stream. It then fetches the length of the first report, uses it to calculate the beginning of the second report, etc. In doing this, it tracks the largest report so it can later allocate a buffer that fits every individual report (but only one at a time). It does not, however, validate that these addresses are all contained within the buffer passed to hciEvtProcessLeExtAdvReport. It is then possible, though unlikely, that the buffer designated to hold the reports is allocated in such a way that one of these out-of-bounds length fields is contained within the new buffer. When the (n-1)th report is copied, it overwrites the length field of the nth report. This now corrupted length field is then used for a memcpy into the new buffer, which may lead to a buffer overflow.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in /cloud_config/cloud_device/info interface, which allows a malicious user to executee arbitrary code on the system via a crafted post request.

NSS (Network Security Services) versions prior to 3.73 or 3.68.1 ESR are vulnerable to a heap overflow when handling DER-encoded DSA or RSA-PSS signatures. Applications using NSS for handling signatures encoded within CMS, S/MIME, PKCS \#7, or PKCS \#12 are likely to be impacted. Applications using NSS for certificate validation or other TLS, X.509, OCSP or CRL functionality may be impacted, depending on how they configure NSS. *Note: This vulnerability does NOT impact Mozilla Firefox.* However, email clients and PDF viewers that use NSS for signature verification, such as Thunderbird, LibreOffice, Evolution and Evince are believed to be impacted. This vulnerability affects NSS < 3.73 and NSS < 3.68.1.

An exploitable heap buffer overflow vulnerability exists in the X509 certificate parsing functionality of InsideSecure MatrixSSL 3.8.7b. A specially crafted x509 certificate can cause a buffer overflow on the heap resulting in remote code execution. To trigger this vulnerability, a specially crafted x509 certificate must be presented to the vulnerable client or server application when initiating secure connection.

Out-of-bounds write in the PCX image codec in QNX SDP versions 8.0, 7.1 and 7.0 could allow an unauthenticated attacker to cause a denial-of-service condition or execute code in the context of the process using the image codec.

An exploitable stack-based buffer overflow vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera. A specially crafted http request can cause a stack-based buffer overflow resulting in overwriting arbitrary data on the stack frame. An attacker can simply send an http request to the device to trigger this vulnerability.

TP-LINK TL-WR886N V7.0_3.0.14_Build_221115_Rel.56908n.bin was discovered to contain a stack overflow via the function getRegVeriRegister.