codecov-node npm module before 3.6.5 allows remote attackers to execute arbitrary commands.The value provided as part of the gcov-root argument is executed by the exec function within lib/codecov.js. This vulnerability exists due to an incomplete fix of CVE-2020-7596.

In codecov (npm package) before version 3.7.1 the upload method has a command injection vulnerability. Clients of the codecov-node library are unlikely to be aware of this, so they might unwittingly write code that contains a vulnerability. A similar CVE (CVE-2020-7597 for GHSA-5q88-cjfq-g2mh) was issued but the fix was incomplete. It only blocked &, and command injection is still possible using backticks instead to bypass the sanitizer. The attack surface is low in this case. Particularly in the standard use of codecov, where the module is used directly in a build pipeline, not built against as a library in another application that may supply malicious input and perform command injection.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiADC version 7.0.0 through 7.0.2, FortiADC version 6.2.0 through 6.2.3, FortiADC version version 6.1.0 through 6.1.6, FortiADC version 6.0.0 through 6.0.4, FortiADC version 5.4.0 through 5.4.5 may allow an attacker to execute unauthorized code or commands via specifically crafted HTTP requests.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Gargoyle router management utility versions 1.5.x contain an authenticated OS command execution vulnerability in /utility/run_commands.sh. The application fails to properly restrict or validate input supplied via the 'commands' parameter, allowing an authenticated attacker to execute arbitrary shell commands on the underlying system. Successful exploitation may result in full compromise of the device, including unauthorized access to system files and execution of attacker-controlled commands.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.

A post-authentication remote command injection vulnerability in SonicWall SMA100 allows a remote authenticated attacker to execute OS system commands in the appliance. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances.

GitHub Actions Runner is the application that runs a job from a GitHub Actions workflow. The actions runner invokes the docker cli directly in order to run job containers, service containers, or container actions. A bug in the logic for how the environment is encoded into these docker commands was discovered in versions prior to 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4 that allows an input to escape the environment variable and modify that docker command invocation directly. Jobs that use container actions, job containers, or service containers alongside untrusted user inputs in environment variables may be vulnerable. The Actions Runner has been patched, both on `github.com` and hotfixes for GHES and GHAE customers in versions 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4. GHES and GHAE customers may want to patch their instance in order to have their runners automatically upgrade to these new runner versions. As a workaround, users may consider removing any container actions, job containers, or service containers from their jobs until they are able to upgrade their runner versions.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPPo function.

A post-authenticated command injection vulnerability in SonicWall SMA100 allows an authenticated attacker to execute OS commands as a 'nobody' user. This vulnerability impacts SMA100 version 10.2.0.5 and earlier.

Racom's MIDGE Firmware 4.4.40.105 contains an issue that allows users to escape the provided command line interface and execute arbitrary OS commands.

A security agent manual scan command injection vulnerability in the Trend Micro Deep Security 20 Agent could allow an attacker to escalate privileges and execute arbitrary code on an affected machine. In certain circumstances, attackers that have legitimate access to the domain may be able to remotely inject commands to other machines in the same domain. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability locally and must have domain user privileges to affect other machines.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiManager Cloud 7.6.0 through 7.6.1, FortiManager Cloud 7.4.0 through 7.4.4, FortiManager Cloud 7.2.2 through 7.2.7, FortiManager 7.6.0 through 7.6.1, FortiManager 7.4.0 through 7.4.5, FortiManager 7.2.1 through 7.2.8 may allow an authenticated remote attacker to execute unauthorized code via FGFM crafted requests.

Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability in `SetIPv6Status` function

IBM Security Verify Access Appliance 10.0.0 through 10.0.8 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

A vulnerability in the Command Runner tool of Cisco DNA Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation by the Command Runner tool. An attacker could exploit this vulnerability by providing crafted input during command execution or via a crafted command runner API call. A successful exploit could allow the attacker to execute arbitrary CLI commands on devices managed by Cisco DNA Center.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 7.0.0 through 7.0.2, FortiWeb version 6.3.6 through 6.3.20, FortiWeb 6.4 all versions allows attacker to execute unauthorized code or commands via specifically crafted HTTP requests.

A vulnerability in the SonicWall NSM On-Prem product allows an authenticated attacker to perform OS command injection using a crafted HTTP request. This vulnerability affects NSM On-Prem 2.2.0-R10 and earlier versions.

Intelbras WiFiber 120AC inMesh before 1-1-220826 allows command injection by authenticated users, as demonstrated by the /boaform/formPing6 and /boaform/formTracert URIs for ping and traceroute.

IBM App Connect Enterprise Certified Container 11.4, 11.5, 11.6, 12.0, 12.1, 12.2, and 12.3 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

An OS command injection vulnerability exists in the httpd txt/restore.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This issue affects some unknown processing of the file /useratte/resmanage.php. The manipulation of the argument load leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-264533 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

Linksys AX3200 1.1.00 is vulnerable to OS command injection by authenticated users via shell metacharacters to the diagnostics traceroute page.

In NOKIA 1350 OMS R14.2, multiple OS Command Injection vulnerabilities occurs. This allows authenticated users to execute commands on the operating system.

In NOKIA NFM-T R19.9, an OS Command Injection vulnerability occurs in /cgi-bin/R19.9/log.pl of the VM Manager WebUI via the cmd HTTP GET parameter. This allows authenticated users to execute commands, with root privileges, on the operating system.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 17 of 46).

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240506. Affected by this issue is some unknown functionality of the file /view/bugSolve/viewData/detail.php. The manipulation of the argument filename leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263936. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Ruijie RG-UAC up to 20240506. Affected by this vulnerability is an unknown functionality of the file /view/networkConfig/RouteConfig/StaticRoute/static_route_edit_commit.php. The manipulation of the argument oldipmask/oldgateway leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263935. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in the httpd SNMP functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP response can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.2.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 233786.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Improper neutralization of special elements in the SMA100 management interface '/cgi-bin/viewcert' POST http method allows a remote authenticated attacker to inject arbitrary commands as a 'nobody' user. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in FortiSOAR IMAP connector version 3.5.7 and below may allow an authenticated attacker to execute unauthorized code or commands via a specifically crafted playbook

There is a command injection vulnerability that may allow an attacker to inject malicious input on the device's operating system.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root This issue affects Iocharger firmware for AC model chargers before version 24120701. Likelihood: Moderate – It might be difficult for an attacker to identify the file structure of the <redated> directory, and then modify the backup to add a new CGI script in the correct directory. Furthermore, the attacker will need an account to restore the settings backup, or convince a user with such access to upload a modified backup file. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and deletefiles and services. CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, but the level of authentication does not matter (PR:L), nor is any user interaction required (UI:N). The attack leads to a full compromised (VC:H/VI:H/VA:H), and compromised devices can be used to pivot into networks that should potentially not be accessible (SC:L/SI:L/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y).

A low privileged remote attacker can read and write files as root due to improper neutralization of special elements in the variable EMAIL_RELAY_PASSWORD in mGuard devices.

The management portal component of JetNexus/EdgeNexus ADC 4.2.8 was discovered to contain a command injection vulnerability. This vulnerability allows authenticated attackers to execute arbitrary commands through a specially crafted payload. This vulnerability can also be exploited from an unauthenticated context via unspecified vectors

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root This issue affects Iocharger firmware for AC model chargers before version 24120701. Likelihood: High. However, the attacker will need a (low privilege) account to gain access to the action.exe CGI binary and upload the crafted firmware file, or convince a user with such access to upload it. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and deletefiles and services. CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, but the level of authentication does not matter (PR:L), nor is any user interaction required (UI:N). The attack leads to a full compromised (VC:H/VI:H/VA:H), and compromised devices can be used to pivot into networks that should potentially not be accessible (SC:L/SI:L/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y).

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in Rakuten Turbo 5G firmware version V1.3.18 and earlier. If this vulnerability is exploited, a remote authenticated attacker may execute an arbitrary OS command.

A command execution vulnerability exists in the access control functionality of Netgear Orbi Router RBR750 4.6.8.5. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A Command Injection vulnerability exists in the do_upgrade_post function of the httpd binary in Linksys E1500 v1.0.06.001. As a result, an authenticated attacker can execute OS commands with root privileges.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setUrlFilterRules. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in delBlacklist. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setModifyVpnUser. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setDmzCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

N-Reporter and N-Cloud, products of the N-Partner, have an OS Command Injection vulnerability. Remote attackers with normal user privilege can execute arbitrary system commands by manipulating user inputs on a specific page.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setAccessDeviceCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.