A vulnerability in Base Software for SoftControl allows an attacker to insert and run arbitrary code in a computer running the affected product. This issue affects: .

This vulnerability allows the successful attacker to gain unauthorized access to a configuration web page delivered by the integrated web Server of EIBPORT. This issue affects EIBPORT V3 KNX: through 3.9.8; EIBPORT V3 KNX GSM: through 3.9.8.

The TextEditor 2.0 in ABB CP400 Panel Builder versions 2.0.7.05 and earlier contain a vulnerability in the file parser of the Text Editor wherein the application doesn't properly prevent the insertion of specially crafted files which could allow arbitrary code execution.

In ABB IP GATEWAY 3.39 and prior, the web server does not sufficiently verify that a request was performed by the authenticated user, which may allow an attacker to launch a request impersonating that user.

A vulnerability in ABB ARG600 Wireless Gateway series that could allow an attacker to exploit the vulnerability by remotely connecting to the serial port gateway, and/or protocol converter, depending on the configuration.

Cross-Site Request Forgery (CSRF) vulnerability in ABB Pulsar Plus System Controller NE843_S, ABB Infinity DC Power Plant allows Cross Site Request Forgery.This issue affects Pulsar Plus System Controller NE843_S : comcode 150042936; Infinity DC Power Plant: H5692448 G104 G842 G224L G630-4 G451C(2) G461(2) – comcode 150047415.

For ABB eSOMS versions 4.0 to 6.0.2, the HTTPOnly flag is not set. This can allow Javascript to access the cookie contents, which in turn might enable Cross Site Scripting.

Lack of adequate input/output validation for ABB eSOMS versions 4.0 to 6.0.2 might allow an attacker to attack such as stored cross-site scripting by storing malicious content in the database.

: Active Debug Code vulnerability in ABB Switch Actuator 4 DU-83330, ABB Switch actuator, door/light 4 DU -83330-500.This issue affects Switch Actuator 4 DU-83330: All Versions; Switch actuator, door/light 4 DU -83330-500: All Versions.

Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in ABB T-MAC Plus. This issue affects T-MAC Plus: 4.0-24.

Pluto Safety PLC Gateway Ethernet devices in ABB GATE-E1 and GATE-E2 all versions allows an unauthenticated attacker using the administrative web interface to insert an HTML/Javascript payload into any of the device properties, which may allow an attacker to display/execute the payload in a visitor browser.

Cross Site Scripting vulnerabilities where found providing a potential for malicious scripts to be injected into a client browser.  Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in ABB EIBPORT V3 KNX, ABB EIBPORT V3 KNX GSM.This issue affects EIBPORT V3 KNX: before 3.9.2; EIBPORT V3 KNX GSM: before 3.9.2.

For ABB eSOMS versions 4.0 to 6.0.2, the X-XSS-Protection HTTP response header is not set in responses from the web server. For older web browser not supporting Content Security Policy, this might increase the risk of Cross Site Scripting.

Stored Cross Site Scripting vulnerabilities exist in ASPECT if administrator creden-tials become compromisedThis issue affects ASPECT-Enterprise: through 3.*; NEXUS Series: through 3.*; MATRIX Series: through 3.*.

Log injection vulnerabilities in ASPECT provide attacker access to inject malicious browser scripts if administrator credentials become compromised.This issue affects ASPECT-Enterprise: through 3.*; NEXUS Series: through 3.*; MATRIX Series: through 3.*.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 15.4 before 15.5.7, all versions starting from 15.6 before 15.6.4, all versions starting from 15.7 before 15.7.2. Due to the improper filtering of query parameters in the wiki changes page, an attacker can execute arbitrary JavaScript on the self-hosted instances running without strict CSP.

Insufficient policy enforcement in Navigation in Google Chrome on iOS prior to 131.0.6778.69 allowed a remote attacker to perform privilege escalation via a series of UI gestures. (Chromium security severity: Medium)

MockServer is open source software which enables easy mocking of any system you integrate with via HTTP or HTTPS. An attacker that can trick a victim into visiting a malicious site while running MockServer locally, will be able to run arbitrary code on the MockServer machine. With an overly broad default CORS configuration MockServer allows any site to send cross-site requests. Additionally, MockServer allows you to create dynamic expectations using Javascript or Velocity templates. Both engines may allow an attacker to execute arbitrary code on-behalf of MockServer. By combining these two issues (Overly broad CORS configuration + Script injection), an attacker could serve a malicious page so that if a developer running MockServer visits it, they will get compromised. For more details including a PoC see the referenced GHSL-2021-059.

The Free Builder for Elementor WordPress plugin before 1.6.7 does not sanitise submitted contact form field values before storing them and outputting them in the admin dashboard, allowing unauthenticated attackers to perform Stored Cross-Site Scripting attacks that execute when a logged-in administrator views the form submissions.

The coreActivity: Activity Logging for WordPress plugin before 1.8.1 does not escape some request data when outputting it back in the admin dashboard, allowing unauthenticated users to perform Stored XSS attack against high privilege users such as admin

Webmin 1.973 is affected by reflected Cross Site Scripting (XSS) to achieve Remote Command Execution through Webmin's running process feature.

The Autotitle for WordPress plugin through 1.0.3 does not have CSRF check in place when updating its settings, which could allow attackers to make a logged in admin change them via a CSRF attack.

A DOM-Based cross-site scripting (XSS) vulnerability in Palo Alto Networks PAN-OS software enables a remote attacker to execute a JavaScript payload in the context of an administrator’s browser when they view a specifically crafted link to the PAN-OS web interface.

Spip 4.1.10 contains a file upload vulnerability that allows attackers to upload malicious SVG files with embedded external links. Attackers can trick administrators into clicking a crafted SVG logo that redirects to a potentially dangerous URL through improper file upload filtering.

Cross-Site Request Forgery (CSRF) vulnerability leading to Cross-Site Scripting (XSS) discovered in tarteaucitron.js – Cookies legislation & GDPR WordPress plugin (versions <= 1.5.4), vulnerable parameters "tarteaucitronEmail" and "tarteaucitronPass".

QStar Archive Solutions Release RELEASE_3-0 Build 7 Patch 0 was discovered to contain a DOM Based Reflected Cross Site Scripting (XSS) vulnerability within the component qnme-ajax?method=tree_level.

iTop is an IT service management platform. When dashlet are refreshed, XSS attacks are possible. This vulnerability is fixed in 3.0.4 and 3.1.1.

iTop is an IT service management platform. When displaying/editing the user's personal tokens, XSS attacks are possible. This vulnerability is fixed in 3.1.1.

LedgerSMB does not check the origin of HTML fragments merged into the browser's DOM. By sending a specially crafted URL to an authenticated user, this flaw can be abused for remote code execution and information disclosure.

Cross-Site Request Forgery (CSRF) vulnerability in Microchip TimeProvider 4100 allows Cross Site Request Forgery, Cross-Site Scripting (XSS).This issue affects TimeProvider 4100: from 1.0.

LedgerSMB does not sufficiently HTML-encode error messages sent to the browser. By sending a specially crafted URL to an authenticated user, this flaw can be abused for remote code execution and information disclosure.

The WP Fluent Forms plugin < 3.6.67 for WordPress is vulnerable to Cross-Site Request Forgery leading to stored Cross-Site Scripting and limited Privilege Escalation due to a missing nonce check in the access control function for administrative AJAX actions

Home assistant is an open source home automation. The Home Assistant login page allows users to use their local Home Assistant credentials and log in to another website that specifies the `redirect_uri` and `client_id` parameters. Although the `redirect_uri` validation typically ensures that it matches the `client_id` and the scheme represents either `http` or `https`, Home Assistant will fetch the `client_id` and check for `<link rel="redirect_uri" href="...">` HTML tags on the page. These URLs are not subjected to the same scheme validation and thus allow for arbitrary JavaScript execution on the Home Assistant administration page via usage of `javascript:` scheme URIs. This Cross-site Scripting (XSS) vulnerability can be executed on the Home Assistant frontend domain, which may be used for a full takeover of the Home Assistant account and installation. This issue has been addressed in version 2023.9.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

A Cross-Site Request Forgery (CSRF) vulnerability was found in Kashipara Music Management System v1.0 via /music/ajax.php?action=delete_genre.

A flaw was found in noobaa-core in versions before 5.7.0. This flaw results in the name of an arbitrarily URL being copied into an HTML document as plain text between tags, including potentially a payload script. The input was echoed unmodified in the application response, resulting in arbitrary JavaScript being injected into an application's response. The highest threat to the system is for confidentiality, availability, and integrity.

Cross-site scripting in usertable.php in TerraMaster TOS version 3.1.03 allows attackers to execute JavaScript via the "modgroup" parameter.

ProGauge MAGLINK LX CONSOLE does not have sufficient filtering on input fields that are used to render pages which may allow cross site scripting.

The ClickBank Affiliate Ads WordPress plugin through 1.20 does not have CSRF check when saving its settings, allowing attacker to make logged in admin change them via a CSRF attack. Furthermore, due to the lack of escaping when they are outputting, it could also lead to Stored Cross-Site Scripting issues

Cross-site scripting (XSS) vulnerability in Stefan Frech online-bookmarks 0.6.12 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Poddycast is a podcast app made with Electron. Prior to version 0.8.1, an attacker can create a podcast or episode with malicious characters and execute commands on the client machine. The application does not clean the HTML characters of the podcast information obtained from the Feed, which allows the injection of HTML and JS code (cross-site scripting). Being an application made in electron, cross-site scripting can be scaled to remote code execution, making it possible to execute commands on the machine where the application is running. The vulnerability is patched in Poddycast version 0.8.1.

A mutation cross-site scripting (XSS) issue in Typora through 0.9.9.31.2 on macOS and through 0.9.81 on Linux leads to Remote Code Execution through Mermaid code blocks. To exploit this vulnerability, one must open a file in Typora. The XSS vulnerability is then triggered due to improper HTML sanitization. Given that the application is based on the Electron framework, the XSS leads to remote code execution in an unsandboxed environment.

The Jupyter notebook is a web-based notebook environment for interactive computing. In affected versions untrusted notebook can execute code on load. Jupyter Notebook uses a deprecated version of Google Caja to sanitize user inputs. A public Caja bypass can be used to trigger an XSS when a victim opens a malicious ipynb document in Jupyter Notebook. The XSS allows an attacker to execute arbitrary code on the victim computer using Jupyter APIs.

An exposed remote debugging port in Naver Comic Viewer prior to 1.0.15.0 allowed a remote attacker to execute arbitrary code via a crafted HTML page.

Cross Site Scripting vulnerability in Martin Kucej i-librarian v.5.11.0 and before allows a local attacker to execute arbitrary code via the search function in the import component.

A Cross-Site Scripting (XSS) vulnerability exists in Webmin 1.973 via the Scheduled Cron Jobs feature.

idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) vulnerability via /admin/userGroup_deal.php?mudi=add&nohrefStr=close

A reflected cross-site scripted (XSS) vulnerability in Codazon Magento Themes v1.1.0.0 to v2.4.7 allows attackers to execute arbitrary Javascript in the context of a user's browser via a crafted payload injected into the cat parameter.

wire-webapp is the web version of Wire, an open-source messenger. A cross-site scripting vulnerability exists in wire-webapp prior to version 2021-06-01-production.0. If a user is instructed to open an image in a new tab (right click -> open in new tab, or copy the URL and paste it in the URL bar), an the image payload is executed on the domain hosting the app (app.wire.com). In particular, if an image contains malicious code in addition to the actual picture, this code is executed on app.wire.com. This allows the attacker to fully control the user account. The vulnerability was patched in version 2021-06-01-production.0. As a workaround, users should not try to open image URLs.

A flaw in the WordPress plugin, WP Maintenance before 5.0.6, allowed attackers to enable a vulnerable site's maintenance mode and inject malicious code affecting site visitors. There was CSRF with resultant XSS.