An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system. The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level. This issue affects Junos OS Evolved: * 22.3-EVO versions before 22.3R2-EVO, * 22.4-EVO versions before 22.4R1-S1-EVO, 22.4R2-EVO.

An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system. The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level. This issue affects Junos OS Evolved:  * All versions before 20.4R3-S7-EVO, * 21.2-EVO versions before 21.2R3-S8-EVO, * 21.4-EVO versions before 21.4R3-S7-EVO, * 22.1-EVO versions before 22.1R3-S6-EVO,  * 22.2-EVO versions before 22.2R3-EVO, * 22.3-EVO versions before 22.3R2-EVO, * 22.4-EVO versions before 22.4R2-EVO.

A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC.

An issue was discovered in EMC RecoverPoint for Virtual Machines versions prior to 5.1.1, EMC RecoverPoint version 5.1.0.0, and EMC RecoverPoint versions prior to 5.0.1.3. Command injection vulnerability in Boxmgmt CLI may allow a malicious user with boxmgmt privileges to bypass Boxmgmt CLI and run arbitrary commands with root privileges.

D-Link router DSL-2750U with firmware vME1.16 or prior versions is vulnerable to OS command injection. An unauthenticated attacker on the local network may exploit this, with CVE-2021-3707, to execute any OS commands on the vulnerable device.

CloudForms Management Engine (cfme) is vulnerable to an improper security setting in the dRuby component of CloudForms. An attacker with access to an unprivileged local shell could use this flaw to execute commands as a high privileged user.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCve74432.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

A vulnerability in specific CLI commands for the Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to perform command injection to the underlying operating system or cause a hang or disconnect of the user session. The attacker needs valid administrator credentials for the device. The vulnerability is due to incomplete input validation of user input for certain CLI ISE configuration commands. An attacker could exploit this vulnerability by authenticating as an administrative user, issuing a specific CLI command, and entering crafted, malicious user input for the command parameters. An exploit could allow the attacker to perform command injection to the lower-level Linux operating system. It is also possible the attacker could cause the ISE user interface for this management session to hang or disconnect. Cisco Bug IDs: CSCvg95479.

Dell VNX2 for File version 8.1.21.266 and earlier, contain a privilege escalation vulnerability. A local malicious admin may potentially exploit vulnerability and gain elevated privileges.

A vulnerability in the command-line interface (CLI) in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

'getlogs' utility in Dell EMC Avamar Server versions 7.2.0, 7.2.1, 7.3.0, 7.3.1, 7.4.0, 7.4.1, 7.5.0, 7.5.1 and 18.1 and Dell EMC Integrated Data Protection Appliance (IDPA) versions 2.0, 2.1 and 2.2 is affected by an OS command injection vulnerability. A malicious Avamar admin user may potentially be able to execute arbitrary commands under root privilege.

A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series routers could allow an authenticated, local attacker to execute arbitrary commands with root privileges on an affected host operating system. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. To exploit this vulnerability, the attacker would need to authenticate to the affected system by using valid administrator credentials. Cisco Bug IDs: CSCvf93332.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.

A vulnerability was found in MailCleaner up to 2023.03.14. It has been declared as critical. This vulnerability affects the function getStats/Services_silentDump/Services_stopStartMTA/Config_saveDateTime/Config_hostid/Logs_StartGetStat/dumpConfiguration of the component SOAP Service. The manipulation leads to os command injection. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-262312.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

There is a command injection vulnerability in the HG8045Q product. When the command-line interface is enabled, which is disabled by default, attackers with administrator privilege could execute part of commands.

Multiple improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerabilities [CWE-78] in Fortinet FortiManager version 7.4.0 through 7.4.2 and before 7.2.5, Fortinet FortiAnalyzer version 7.4.0 through 7.4.2 and before 7.2.5 and Fortinet FortiAnalyzer-BigData before 7.4.0 allows an authenticated privileged attacker to execute unauthorized code or commands via crafted CLI requests.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the 'libsal.so' of the Zyxel GS1900 series firmware version 2.60 could allow an authenticated local user to execute arbitrary OS commands via a crafted function call.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A command injection vulnerability in the CGI program of the Zyxel VPN2S firmware version 1.12 could allow an authenticated, local user to execute arbitrary OS commands.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software and Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input in the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system. An attacker would need valid user credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768.

Improper Input Validation vulnerability in a particular configuration setting field of Hitachi Energy TXpert Hub CoreTec 4 product, allows an attacker with access to an authorized user with ADMIN or ENGINEER role rights to inject an OS command that is executed by the system. This issue affects: Hitachi Energy TXpert Hub CoreTec 4 version 2.0.0; 2.0.1; 2.1.0; 2.1.1; 2.1.2; 2.1.3; 2.2.0; 2.2.1.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuv91356.

Multiple improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiManager, FortiAnalyzer versions 7.4.0 through 7.4.2 7.2.0 through 7.2.5 and 7.0.0 through 7.0.12 and 6.4.0 through 6.4.14 and 6.2.0 through 6.2.12 and 6.0.0 through 6.0.12 and 5.6.0 through 5.6.11 and 5.4.0 through 5.4.7 and 5.2.0 through 5.2.10 and 5.0.0 through 5.0.12 and 4.3.4 through 4.3.8 allows attacker to execute unauthorized code or commands via crafted CLI requests.

A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series Aggregation Services Routers could allow an authenticated, local attacker to perform a command injection attack on an affected system. The vulnerability is due to insufficient validation of commands that are supplied to certain configurations in the CLI of the affected operating system. An attacker could exploit this vulnerability by injecting crafted arguments into a vulnerable CLI command for an affected system. A successful exploit could allow the attacker to insert and execute arbitrary commands in the CLI of the affected system. To exploit this vulnerability, the attacker would need to authenticate to an affected system by using valid administrator credentials. Cisco Bug IDs: CSCvg29441.

A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663.

A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series Aggregation Services Routers could allow an authenticated, local attacker to execute arbitrary commands with root privileges on an affected operating system. The vulnerability is due to insufficient validation of user-supplied input by the affected operating system. An attacker could exploit this vulnerability by authenticating to an affected system and injecting malicious arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. Cisco Bug IDs: CSCvg38807.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, high-privileged, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command parameters in the CLI parser. An attacker could exploit this vulnerability by invoking a vulnerable CLI command with crafted malicious parameters. An exploit could allow the attacker to execute arbitrary commands with a non-root user account on the underlying Linux operating system of the affected device. Cisco Bug IDs: CSCvi09723.

The Check Point Gaia Portal's GUI Clients allowed authenticated administrators with permission for the GUI Clients settings to inject a command that would run on the Gaia OS.

Improper neutralization of special elements used in an OS command in Druva inSync Windows Client 6.5.0 allows a local, unauthenticated attacker to execute arbitrary operating system commands with SYSTEM privileges.

Pi-hole is a Linux network-level advertisement and Internet tracker blocking application. Multiple privilege escalation vulnerabilities were discovered in version 5.2.4 of Pi-hole core. See the referenced GitHub security advisory for details.

IBM DataPower Gateway 2018.4.1.0 through 2018.4.1.6, 7.6.0.0 through 7.6.0.15 and IBM MQ Appliance 8.0.0.0 through 8.0.0.12, 9.1.0.0 through 9.1.0.2, and 9.1.1 through 9.1.2 could allow a local attacker to execute arbitrary commands on the system, caused by a command injection vulnerability. IBM X-Force ID: 16188.

An exploitable command injection vulnerability exists in the iocheckd service ‘I/O-Check’ function of the WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can be used to inject OS commands. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1e900 the extracted gateway value from the xml file is used as an argument to /etc/config-tools/config_default_gateway number=0 state=enabled value=<contents of gateway node> using sprintf(). This command is later executed via a call to system().

changetrack 4.3 allows local users to execute arbitrary commands via CRLF sequences and shell metacharacters in a filename in a directory that is checked by changetrack.