A vulnerability in the web-based management interface of Cisco AsyncOS for Cisco Email Security Appliance (ESA), Cisco Web Security Appliance (WSA), and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of specific HTTP request headers. An attacker could exploit this vulnerability by sending a malformed HTTP request to an affected device. A successful exploit could allow the attacker to trigger a prolonged status of high CPU utilization relative to the GUI process(es). Upon successful exploitation of this vulnerability, an affected device will still be operative, but its response time and overall performance may be degraded.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the PIM process to restart, resulting in a denial of service condition on an affected device. The vulnerability is due to the incorrect processing of crafted AutoRP packets. An attacker could exploit this vulnerability by sending crafted packets to port UDP 496 on a reachable IP address on the device. A successful exploit could allow the attacker to cause the PIM process to restart. Software versions prior to 6.2.3, 6.3.2, 6.4.0, and 6.5.1 are affected.

A vulnerability in the Cisco Encrypted Traffic Analytics (ETA) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to reload the device and causing a DoS condition.

A vulnerability in the PDF parsing module of Clam AntiVirus (ClamAV) versions 1.4.0, 1.3.2 and prior versions, all 1.2.x versions, 1.0.6 and prior versions, all 0.105.x versions, all 0.104.x versions, and 0.103.11 and all prior versions could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to an out of bounds read. An attacker could exploit this vulnerability by submitting a crafted PDF file to be scanned by ClamAV on an affected device. An exploit could allow the attacker to terminate the scanning process.

A vulnerability in the web interface of Cisco Small Business 200, 300, and 500 Series Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of requests sent to the web interface. An attacker could exploit this vulnerability by sending a malicious request to the web interface of an affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

The qtm_decompress function in libclamav/mspack.c in ClamAV before 0.96 allows remote attackers to cause a denial of service (memory corruption and application crash) via a crafted CAB archive that uses the Quantum (aka .Q) compression format. NOTE: some of these details are obtained from third party information.

Multiple vulnerabilities in the video service of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by sending crafted traffic to the video service of an affected endpoint. A successful exploit could allow the attacker to cause the video service to crash, resulting in a DoS condition on an affected device.

The CLI_ISCONTAINED macro in libclamav/others.h in ClamAV before 0.95.1 allows remote attackers to cause a denial of service (application crash) via a malformed file with UPack encoding.

A vulnerability in the packet processing functionality of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted H.323 traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to either reboot normally or reboot into maintenance mode, which could result in a DoS condition on the device.

A vulnerability in the web-based management interface of Cisco Small Business 200 Series Smart Switches, Cisco Small Business 300 Series Managed Switches, and Cisco Small Business 500 Series Stackable Managed Switches could allow an unauthenticated, remote attacker to render the web-based management interface unusable, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to cause a permanent invalid redirect for requests sent to the web-based management interface of the device, resulting in a DoS condition.

A vulnerability in the External Agent Assignment Service (EAAS) feature of Cisco Enterprise Chat and Email (ECE) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of Media Routing Peripheral Interface Manager (MR PIM) traffic that is received by an affected device. An attacker could exploit this vulnerability by sending crafted MR PIM traffic to an affected device. A successful exploit could allow the attacker to trigger a failure on the MR PIM connection between Cisco ECE and Cisco Unified Contact Center Enterprise (CCE), leading to a DoS condition on EAAS that would prevent customers from starting chat, callback, or delayed callback sessions. Note: When the attack traffic stops, the EAAS process must be manually restarted to restore normal operation. To restart the process in the System Console, choose Shared Resources > Services > Unified CCE > EAAS, then click Start.

A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

A vulnerability in the Session Initiation Protocol (SIP) protocol implementation of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of input SIP traffic. An attacker could exploit this vulnerability by sending a malformed SIP packet to an affected Cisco Unified Communications Manager. A successful exploit could allow the attacker to trigger a new registration process on all connected phones, temporarily disrupting service.

A vulnerability in the Secure Sockets Layer (SSL) input packet processor of Cisco Small Business 200, 300, and 500 Series Managed Switches could allow an unauthenticated, remote attacker to cause a memory corruption on an affected device. The vulnerability is due to improper validation of HTTPS packets. An attacker could exploit this vulnerability by sending a malformed HTTPS packet to the management web interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a denial of service (DoS) condition.

A vulnerability in the web server of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to cause the web server process to crash, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of user-supplied input on the web interface. An attacker could exploit this vulnerability by submitting a crafted HTTP request to certain endpoints of the affected software. A successful exploit could allow an attacker to cause the web server to crash. Physical access to the device may be required for a restart.

A vulnerability in the web-based management interface of Cisco RV110W, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to disconnect clients that are connected to the guest network on an affected router. The vulnerability is due to improper authorization of an HTTP request. An attacker could exploit this vulnerability by accessing the URL for device disconnection and providing the connected device information. A successful exploit could allow the attacker to deny service to specific clients that are connected to the guest network.

A vulnerability in the interactions between the DHCP and TFTP features for Cisco Small Business 300 Series (Sx300) Managed Switches could allow an unauthenticated, remote attacker to cause the device to become low on system memory, which in turn could lead to an unexpected reload of the device and result in a denial of service (DoS) condition on an affected device. The vulnerability is due to a failure to free system memory when an unexpected DHCP request is received. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the targeted device. A successful exploit could allow the attacker to cause an unexpected reload of the device.

Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to trigger high CPU usage, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of Secure Sockets Layer (SSL) renegotiation requests. An attacker could exploit this vulnerability by sending renegotiation requests at a high rate. An successful exploit could increase the resource usage on the system, eventually leading to a DoS condition. This vulnerability affects version 2.1.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

A vulnerability in the implementation of the Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains a specific BGP attribute. An attacker could exploit this vulnerability by sending BGP update messages that include a specific, malformed attribute to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim’s BGP network on an existing, valid TCP connection to a BGP peer.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

A vulnerability in the call-handling functionality of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and 8800 Series could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability is due to incomplete error handling when XML data within a SIP packet is parsed. An attacker could exploit this vulnerability by sending a SIP packet that contains a malicious XML payload to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition.

A vulnerability in the data acquisition (DAQ) component of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured access control policies or cause a denial of service (DoS) condition. The vulnerability exists because the affected software improperly manages system memory resources when inspecting traffic. An attacker could exploit this vulnerability by generating specific traffic patterns for the software to inspect. A successful exploit could allow the attacker to exhaust system memory resources used for traffic inspection. Depending on the configuration, the FTD Software could fail open and cease to inspect traffic or fail closed and result in a DoS condition. This vulnerability may require manual intervention to restore the software.

A vulnerability in the Session Initiation Protocol (SIP) inspection module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper parsing of SIP messages. An attacker could exploit this vulnerability by sending a malicious SIP packet through an affected device. A successful exploit could allow the attacker to trigger an integer underflow, causing the software to try to read unmapped memory and resulting in a crash.

A vulnerability in the common Session Initiation Protocol (SIP) library of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient sanity checks on an internal data structure. An attacker could exploit this vulnerability by sending a sequence of malicious SIP messages to an affected device. An exploit could allow the attacker to cause a NULL pointer dereference, resulting in a crash of the iosd process. This triggers a reload of the device.

A vulnerability in the WebVPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause increased CPU utilization on an affected device. The vulnerability is due to excessive processing load for a specific WebVPN HTTP page request. An attacker could exploit this vulnerability by sending multiple WebVPN HTTP page load requests for a specific URL. A successful exploit could allow the attacker to increase CPU load on the device, resulting in a denial of service (DoS) condition, which could cause traffic to be delayed through the device.

A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of transient SIP packets on which NAT is performed on an affected device. An attacker could exploit this vulnerability by using UDP port 5060 to send crafted SIP packets through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Ident protocol handler of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability exists because the affected software incorrectly handles memory structures, leading to a NULL pointer dereference. An attacker could exploit this vulnerability by opening a TCP connection to specific ports and sending traffic over that connection. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the ingress packet processing function of Cisco IOS Software for Cisco Catalyst 4000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper resource allocation when processing TCP packets directed to the device on specific Cisco Catalyst 4000 Series Switches. An attacker could exploit this vulnerability by sending crafted TCP streams to an affected device. A successful exploit could cause the affected device to run out of buffer resources, impairing operations of control plane and management plane protocols, resulting in a DoS condition. This vulnerability can be triggered only by traffic that is destined to an affected device and cannot be exploited using traffic that transits an affected device.

A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause a queue wedge on a leaf switch, which could result in critical control plane traffic to the device being dropped. This could result in one or more leaf switches being removed from the fabric. This vulnerability is due to mishandling of ingress TCP traffic to a specific port. An attacker could exploit this vulnerability by sending a stream of TCP packets to a specific port on a Switched Virtual Interface (SVI) configured on the device. A successful exploit could allow the attacker to cause a specific packet queue to queue network buffers but never process them, leading to an eventual queue wedge. This could cause control plane traffic to be dropped, resulting in a denial of service (DoS) condition where the leaf switches are unavailable. Note: This vulnerability requires a manual intervention to power-cycle the device to recover.

Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section.

A vulnerability in the IPv4 protocol handling of Cisco StarOS could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak that occurs during packet processing. An attacker could exploit this vulnerability by sending a series of crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to exhaust the available memory and cause an unexpected restart of the npusim process, leading to a DoS condition on the affected device.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability with the Border Gateway Protocol (BGP) for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a routing process to crash, which could lead to a denial of service (DoS) condition. This vulnerability is due to an issue with the installation of routes upon receipt of a BGP update. An attacker could exploit this vulnerability by sending a crafted BGP update to an affected device. A successful exploit could allow the attacker to cause the routing process to crash, which could cause the device to reload. This vulnerability applies to both Internal BGP (IBGP) and External BGP (EBGP). Note: The Cisco implementation of BGP accepts incoming BGP traffic from explicitly configured peers only. To exploit this vulnerability, an attacker would need to send a specific BGP update message over an established TCP connection that appears to come from a trusted BGP peer.

A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.

A vulnerability in the RADIUS setting Reject RADIUS requests from clients with repeated failures on Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause Cisco ISE to restart unexpectedly. This vulnerability is due to a logic error when processing a RADIUS access request for a MAC address that is already a rejected endpoint. An attacker could exploit this vulnerability by sending a specific sequence of multiple crafted RADIUS access request messages to Cisco ISE. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when Cisco ISE restarts.

Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section.

A vulnerability in the email parsing module in Clam AntiVirus (ClamAV) Software version 0.103.1 and all prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper variable initialization that may result in an NULL pointer read. An attacker could exploit this vulnerability by sending a crafted email to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process crash, resulting in a denial of service condition.

Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.