In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: Fix a NULL pointer dereference A NULL pointer dereference is triggered when probing the MMIO RAPL driver on platforms with CPU ID not listed in intel_rapl_common CPU model list. This is because the intel_rapl_common module still probes on such platforms even if 'defaults_msr' is not set after commit 1488ac990ac8 ("powercap: intel_rapl: Allow probing without CPUID match"). Thus the MMIO RAPL rp->priv->defaults is NULL when registering to RAPL framework. Fix the problem by adding sanity check to ensure rp->priv->rapl_defaults is always valid.

In the Linux kernel, the following vulnerability has been resolved: spi: lpspi: Avoid potential use-after-free in probe() fsl_lpspi_probe() is allocating/disposing memory manually with spi_alloc_host()/spi_alloc_target(), but uses devm_spi_register_controller(). In case of error after the latter call the memory will be explicitly freed in the probe function by spi_controller_put() call, but used afterwards by "devm" management outside probe() (spi_unregister_controller() <- devm_spi_unregister() below). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 ... Call trace: kernfs_find_ns kernfs_find_and_get_ns sysfs_remove_group sysfs_remove_groups device_remove_attrs device_del spi_unregister_controller devm_spi_unregister release_nodes devres_release_all really_probe driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork

In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Use a cpumask to know what threads are kthreads The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthread ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4130: zero-initialize clock init data The clk_init_data struct does not have all its members initialized, causing issues when trying to expose the internal clock on the CLK pin. Fix this by zero-initializing the clk_init_data struct.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix NULL pointer dereference when get power limit Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL.

In the Linux kernel, the following vulnerability has been resolved: HID: nvidia-shield: Add missing null pointer checks to LED initialization devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. [jkosina@suse.com: tweak changelog a bit]

In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_core_get NULL dereference It is possible for clk_core_get to dereference a NULL in the following sequence: clk_core_get() of_clk_get_hw_from_clkspec() __of_clk_get_hw_from_provider() __clk_get_hw() __clk_get_hw() can return NULL which is dereferenced by clk_core_get() at hw->core. Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based clk_lookups") the check IS_ERR_OR_NULL() was performed which would have caught the NULL. Reading the description of this function it talks about returning NULL but that cannot be so at the moment. Update the function to check for hw before dereferencing it and return NULL if hw is NULL.

In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8.

In the Linux kernel, the following vulnerability has been resolved: net: hamradio: fix memory leak in mkiss_close My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tail_call_reachable rejection for interpreter when jit failed During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's ---truncated---

In the Linux kernel, the following vulnerability has been resolved: powerpc/kasan: Limit KASAN thread size increase to 32KB KASAN is seen to increase stack usage, to the point that it was reported to lead to stack overflow on some 32-bit machines (see link). To avoid overflows the stack size was doubled for KASAN builds in commit 3e8635fb2e07 ("powerpc/kasan: Force thread size increase with KASAN"). However with a 32KB stack size to begin with, the doubling leads to a 64KB stack, which causes build errors: arch/powerpc/kernel/switch.S:249: Error: operand out of range (0x000000000000fe50 is not between 0xffffffffffff8000 and 0x0000000000007fff) Although the asm could be reworked, in practice a 32KB stack seems sufficient even for KASAN builds - the additional usage seems to be in the 2-3KB range for a 64-bit KASAN build. So only increase the stack for KASAN if the stack size is < 32KB.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause a null-pointer dereference, which may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: arp: Prevent overflow in arp_req_get(). syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fixed integer types and null check locations [why]: issues fixed: - comparison with wider integer type in loop condition which can cause infinite loops - pointer dereference before null check

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in ip_mc_add1_src BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is received on HIP08 devices The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel...

In the Linux kernel, the following vulnerability has been resolved: phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path If devm_krealloc() fails, then 'efuse' is leaking. So free it to avoid a leak.

In the Linux kernel, the following vulnerability has been resolved: media: mxl111sf: change mutex_init() location Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location. Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls: dvb_usbv2_init() dvb_usbv2_adapter_init() dvb_usbv2_adapter_frontend_init() props->frontend_attach() props->init() Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex.

In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix qedr_create_user_qp error flow Avoid the following warning by making sure to free the allocated resources in case that qedr_init_user_queue() fail. -----------[ cut here ]----------- WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3 ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt] CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022 RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286 RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016 RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80 R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? ib_uverbs_close+0x1f/0xb0 [ib_uverbs] ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? __warn+0x81/0x110 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? report_bug+0x10a/0x140 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ib_uverbs_close+0x1f/0xb0 [ib_uverbs] __fput+0x94/0x250 task_work_run+0x5c/0x90 do_exit+0x270/0x4a0 do_group_exit+0x2d/0x90 get_signal+0x87c/0x8c0 arch_do_signal_or_restart+0x25/0x100 ? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs] exit_to_user_mode_loop+0x9c/0x130 exit_to_user_mode_prepare+0xb6/0x100 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 ? common_interrupt+0x43/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x1470abe3ec6b Code: Unable to access opcode bytes at RIP 0x1470abe3ec41. RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004 RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00 R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358 R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470 </TASK> --[ end trace 888a9b92e04c5c97 ]--

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") introduced a smatch warning about another conditional block in dpu_encoder_helper_phys_cleanup() which had assumed hw_pp will always be valid which may not necessarily be true. Lets fix the other conditional block by making sure hw_pp is valid before dereferencing it. Patchwork: https://patchwork.freedesktop.org/patch/574878/

In the Linux kernel, the following vulnerability has been resolved: llc: make llc_ui_sendmsg() more robust against bonding changes syzbot was able to trick llc_ui_sendmsg(), allocating an skb with no headroom, but subsequently trying to push 14 bytes of Ethernet header [1] Like some others, llc_ui_sendmsg() releases the socket lock before calling sock_alloc_send_skb(). Then it acquires it again, but does not redo all the sanity checks that were performed. This fix: - Uses LL_RESERVED_SPACE() to reserve space. - Check all conditions again after socket lock is held again. - Do not account Ethernet header for mtu limitation. [1] skbuff: skb_under_panic: text:ffff800088baa334 len:1514 put:14 head:ffff0000c9c37000 data:ffff0000c9c36ff2 tail:0x5dc end:0x6c0 dev:bond0 kernel BUG at net/core/skbuff.c:193 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6875 Comm: syz-executor.0 Not tainted 6.7.0-rc8-syzkaller-00101-g0802e17d9aca-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:189 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 lr : skb_panic net/core/skbuff.c:189 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 sp : ffff800096f97000 x29: ffff800096f97010 x28: ffff80008cc8d668 x27: dfff800000000000 x26: ffff0000cb970c90 x25: 00000000000005dc x24: ffff0000c9c36ff2 x23: ffff0000c9c37000 x22: 00000000000005ea x21: 00000000000006c0 x20: 000000000000000e x19: ffff800088baa334 x18: 1fffe000368261ce x17: ffff80008e4ed000 x16: ffff80008a8310f8 x15: 0000000000000001 x14: 1ffff00012df2d58 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000ff0100 x9 : e28a51f1087e8400 x8 : e28a51f1087e8400 x7 : ffff80008028f8d0 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800082b78714 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic net/core/skbuff.c:189 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 skb_push+0xf0/0x108 net/core/skbuff.c:2451 eth_header+0x44/0x1f8 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3188 [inline] llc_mac_hdr_init+0x110/0x17c net/llc/llc_output.c:33 llc_sap_action_send_xid_c+0x170/0x344 net/llc/llc_s_ac.c:85 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x1ec/0x774 net/llc/llc_sap.c:209 llc_build_and_send_xid_pkt+0x12c/0x1c0 net/llc/llc_sap.c:270 llc_ui_sendmsg+0x7bc/0xb1c net/llc/af_llc.c:997 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x194/0x274 net/socket.c:767 splice_to_socket+0x7cc/0xd58 fs/splice.c:881 do_splice_from fs/splice.c:933 [inline] direct_splice_actor+0xe4/0x1c0 fs/splice.c:1142 splice_direct_to_actor+0x2a0/0x7e4 fs/splice.c:1088 do_splice_direct+0x20c/0x348 fs/splice.c:1194 do_sendfile+0x4bc/0xc70 fs/read_write.c:1254 __do_sys_sendfile64 fs/read_write.c:1322 [inline] __se_sys_sendfile64 fs/read_write.c:1308 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1308 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x158 arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595 Code: aa1803e6 aa1903e7 a90023f5 94792f6a (d4210000)

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix RELEASE_LOCKOWNER The test on so_count in nfsd4_release_lockowner() is nonsense and harmful. Revert to using check_for_locks(), changing that to not sleep. First: harmful. As is documented in the kdoc comment for nfsd4_release_lockowner(), the test on so_count can transiently return a false positive resulting in a return of NFS4ERR_LOCKS_HELD when in fact no locks are held. This is clearly a protocol violation and with the Linux NFS client it can cause incorrect behaviour. If RELEASE_LOCKOWNER is sent while some other thread is still processing a LOCK request which failed because, at the time that request was received, the given owner held a conflicting lock, then the nfsd thread processing that LOCK request can hold a reference (conflock) to the lock owner that causes nfsd4_release_lockowner() to return an incorrect error. The Linux NFS client ignores that NFS4ERR_LOCKS_HELD error because it never sends NFS4_RELEASE_LOCKOWNER without first releasing any locks, so it knows that the error is impossible. It assumes the lock owner was in fact released so it feels free to use the same lock owner identifier in some later locking request. When it does reuse a lock owner identifier for which a previous RELEASE failed, it will naturally use a lock_seqid of zero. However the server, which didn't release the lock owner, will expect a larger lock_seqid and so will respond with NFS4ERR_BAD_SEQID. So clearly it is harmful to allow a false positive, which testing so_count allows. The test is nonsense because ... well... it doesn't mean anything. so_count is the sum of three different counts. 1/ the set of states listed on so_stateids 2/ the set of active vfs locks owned by any of those states 3/ various transient counts such as for conflicting locks. When it is tested against '2' it is clear that one of these is the transient reference obtained by find_lockowner_str_locked(). It is not clear what the other one is expected to be. In practice, the count is often 2 because there is precisely one state on so_stateids. If there were more, this would fail. In my testing I see two circumstances when RELEASE_LOCKOWNER is called. In one case, CLOSE is called before RELEASE_LOCKOWNER. That results in all the lock states being removed, and so the lockowner being discarded (it is removed when there are no more references which usually happens when the lock state is discarded). When nfsd4_release_lockowner() finds that the lock owner doesn't exist, it returns success. The other case shows an so_count of '2' and precisely one state listed in so_stateid. It appears that the Linux client uses a separate lock owner for each file resulting in one lock state per lock owner, so this test on '2' is safe. For another client it might not be safe. So this patch changes check_for_locks() to use the (newish) find_any_file_locked() so that it doesn't take a reference on the nfs4_file and so never calls nfsd_file_put(), and so never sleeps. With this check is it safe to restore the use of check_for_locks() rather than testing so_count against the mysterious '2'.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() Determine if the group block bitmap is corrupted before using ac_b_ex in ext4_mb_try_best_found() to avoid allocating blocks from a group with a corrupted block bitmap in the following concurrency and making the situation worse. ext4_mb_regular_allocator ext4_lock_group(sb, group) ext4_mb_good_group // check if the group bbitmap is corrupted ext4_mb_complex_scan_group // Scan group gets ac_b_ex but doesn't use it ext4_unlock_group(sb, group) ext4_mark_group_bitmap_corrupted(group) // The block bitmap was corrupted during // the group unlock gap. ext4_mb_try_best_found ext4_lock_group(ac->ac_sb, group) ext4_mb_use_best_found mb_mark_used // Allocating blocks in block bitmap corrupted group

In the Linux kernel, the following vulnerability has been resolved: tracefs: Use generic inode RCU for synchronizing freeing With structure layout randomization enabled for 'struct inode' we need to avoid overlapping any of the RCU-used / initialized-only-once members, e.g. i_lru or i_sb_list to not corrupt related list traversals when making use of the rcu_head. For an unlucky structure layout of 'struct inode' we may end up with the following splat when running the ftrace selftests: [<...>] list_del corruption, ffff888103ee2cb0->next (tracefs_inode_cache+0x0/0x4e0 [slab object]) is NULL (prev is tracefs_inode_cache+0x78/0x4e0 [slab object]) [<...>] ------------[ cut here ]------------ [<...>] kernel BUG at lib/list_debug.c:54! [<...>] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [<...>] CPU: 3 PID: 2550 Comm: mount Tainted: G N 6.8.12-grsec+ #122 ed2f536ca62f28b087b90e3cc906a8d25b3ddc65 [<...>] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [<...>] RIP: 0010:[<ffffffff84656018>] __list_del_entry_valid_or_report+0x138/0x3e0 [<...>] Code: 48 b8 99 fb 65 f2 ff ff ff ff e9 03 5c d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff e9 33 5a d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff <0f> 0b 4c 89 e9 48 89 ea 48 89 ee 48 c7 c7 60 8f dd 89 31 c0 e8 2f [<...>] RSP: 0018:fffffe80416afaf0 EFLAGS: 00010283 [<...>] RAX: 0000000000000098 RBX: ffff888103ee2cb0 RCX: 0000000000000000 [<...>] RDX: ffffffff84655fe8 RSI: ffffffff89dd8b60 RDI: 0000000000000001 [<...>] RBP: ffff888103ee2cb0 R08: 0000000000000001 R09: fffffbd0082d5f25 [<...>] R10: fffffe80416af92f R11: 0000000000000001 R12: fdf99c16731d9b6d [<...>] R13: 0000000000000000 R14: ffff88819ad4b8b8 R15: 0000000000000000 [<...>] RBX: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RDX: __list_del_entry_valid_or_report+0x108/0x3e0 [<...>] RSI: __func__.47+0x4340/0x4400 [<...>] RBP: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RSP: process kstack fffffe80416afaf0+0x7af0/0x8000 [mount 2550 2550] [<...>] R09: kasan shadow of process kstack fffffe80416af928+0x7928/0x8000 [mount 2550 2550] [<...>] R10: process kstack fffffe80416af92f+0x792f/0x8000 [mount 2550 2550] [<...>] R14: tracefs_inode_cache+0x78/0x4e0 [slab object] [<...>] FS: 00006dcb380c1840(0000) GS:ffff8881e0600000(0000) knlGS:0000000000000000 [<...>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [<...>] CR2: 000076ab72b30e84 CR3: 000000000b088004 CR4: 0000000000360ef0 shadow CR4: 0000000000360ef0 [<...>] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [<...>] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [<...>] ASID: 0003 [<...>] Stack: [<...>] ffffffff818a2315 00000000f5c856ee ffffffff896f1840 ffff888103ee2cb0 [<...>] ffff88812b6b9750 0000000079d714b6 fffffbfff1e9280b ffffffff8f49405f [<...>] 0000000000000001 0000000000000000 ffff888104457280 ffffffff8248b392 [<...>] Call Trace: [<...>] <TASK> [<...>] [<ffffffff818a2315>] ? lock_release+0x175/0x380 fffffe80416afaf0 [<...>] [<ffffffff8248b392>] list_lru_del+0x152/0x740 fffffe80416afb48 [<...>] [<ffffffff8248ba93>] list_lru_del_obj+0x113/0x280 fffffe80416afb88 [<...>] [<ffffffff8940fd19>] ? _atomic_dec_and_lock+0x119/0x200 fffffe80416afb90 [<...>] [<ffffffff8295b244>] iput_final+0x1c4/0x9a0 fffffe80416afbb8 [<...>] [<ffffffff8293a52b>] dentry_unlink_inode+0x44b/0xaa0 fffffe80416afbf8 [<...>] [<ffffffff8293fefc>] __dentry_kill+0x23c/0xf00 fffffe80416afc40 [<...>] [<ffffffff8953a85f>] ? __this_cpu_preempt_check+0x1f/0xa0 fffffe80416afc48 [<...>] [<ffffffff82949ce5>] ? shrink_dentry_list+0x1c5/0x760 fffffe80416afc70 [<...>] [<ffffffff82949b71>] ? shrink_dentry_list+0x51/0x760 fffffe80416afc78 [<...>] [<ffffffff82949da8>] shrink_dentry_list+0x288/0x760 fffffe80416afc80 [<...>] [<ffffffff8294ae75>] shrink_dcache_sb+0x155/0x420 fffffe80416afcc8 [<...>] [<ffffffff8953a7c3>] ? debug_smp_processor_id+0x23/0xa0 fffffe80416afce0 [<...>] [<ffffffff8294ad20>] ? do_one_tre ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tools/rtla: Fix clang warning about mount_point var size clang is reporting this warning: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source] 548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) { | ^ Increase mount_point variable size to MAX_PATH+1 to avoid the overflow.

In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid-of: fix NULL-deref on failed power up A while back the I2C HID implementation was split in an ACPI and OF part, but the new OF driver never initialises the client pointer which is dereferenced on power-up failures.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family.

In the Linux kernel, the following vulnerability has been resolved: Fix memory leak in posix_clock_open() If the clk ops.open() function returns an error, we don't release the pccontext we allocated for this clock. Re-organize the code slightly to make it all more obvious.

In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal On unloading of the scmi_perf_domain module got the below splat, when in the DT provided to the system under test the '#power-domain-cells' property was missing. Indeed, this particular setup causes the probe to bail out early without giving any error, which leads to the ->remove() callback gets to run too, but without all the expected initialized structures in place. Add a check and bail out early on remove too. Call trace: scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain] scmi_dev_remove+0x28/0x40 [scmi_core] device_remove+0x54/0x90 device_release_driver_internal+0x1dc/0x240 driver_detach+0x58/0xa8 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x70 scmi_driver_unregister+0x28/0x180 [scmi_core] scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain] __arm64_sys_delete_module+0x1a8/0x2c0 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: nbd: null check for nla_nest_start nla_nest_start() may fail and return NULL. Insert a check and set errno based on other call sites within the same source code.

In the Linux kernel, the following vulnerability has been resolved: net: fix removing a namespace with conflicting altnames Mark reports a BUG() when a net namespace is removed. kernel BUG at net/core/dev.c:11520! Physical interfaces moved outside of init_net get "refunded" to init_net when that namespace disappears. The main interface name may get overwritten in the process if it would have conflicted. We need to also discard all conflicting altnames. Recent fixes addressed ensuring that altnames get moved with the main interface, which surfaced this problem.

In the Linux kernel, the following vulnerability has been resolved: Both cadence-quadspi ->runtime_suspend() and ->runtime_resume() implementations start with: struct cqspi_st *cqspi = dev_get_drvdata(dev); struct spi_controller *host = dev_get_drvdata(dev); This obviously cannot be correct, unless "struct cqspi_st" is the first member of " struct spi_controller", or the other way around, but it is not the case. "struct spi_controller" is allocated by devm_spi_alloc_host(), which allocates an extra amount of memory for private data, used to store "struct cqspi_st". The ->probe() function of the cadence-quadspi driver then sets the device drvdata to store the address of the "struct cqspi_st" structure. Therefore: struct cqspi_st *cqspi = dev_get_drvdata(dev); is correct, but: struct spi_controller *host = dev_get_drvdata(dev); is not, as it makes "host" point not to a "struct spi_controller" but to the same "struct cqspi_st" structure as above. This obviously leads to bad things (memory corruption, kernel crashes) directly during ->probe(), as ->probe() enables the device using PM runtime, leading the ->runtime_resume() hook being called, which in turns calls spi_controller_resume() with the wrong pointer. This has at least been reported [0] to cause a kernel crash, but the exact behavior will depend on the memory contents. [0] https://lore.kernel.org/all/20240226121803.5a7r5wkpbbowcxgx@dhruva/ This issue potentially affects all platforms that are currently using the cadence-quadspi driver.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix iopt_access_list_id overwrite bug Syzkaller reported the following WARN_ON: WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360 Call Trace: iommufd_access_change_ioas+0x2fe/0x4e0 iommufd_access_destroy_object+0x50/0xb0 iommufd_object_remove+0x2a3/0x490 iommufd_object_destroy_user iommufd_access_destroy+0x71/0xb0 iommufd_test_staccess_release+0x89/0xd0 __fput+0x272/0xb50 __fput_sync+0x4b/0x60 __do_sys_close __se_sys_close __x64_sys_close+0x8b/0x110 do_syscall_x64 The mismatch between the access pointer in the list and the passed-in pointer is resulting from an overwrite of access->iopt_access_list_id, in iopt_add_access(). Called from iommufd_access_change_ioas() when xa_alloc() succeeds but iopt_calculate_iova_alignment() fails. Add a new_id in iopt_add_access() and only update iopt_access_list_id when returning successfully.

In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow() There are code paths from which the function is called without holding the RCU read lock, resulting in a suspicious RCU usage warning [1]. Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire the RCU read lock before calling l3mdev_master_upper_ifindex_by_index_rcu(). [1] WARNING: suspicious RCU usage 6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/361: #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60 stack backtrace: CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0xba/0x110 lockdep_rcu_suspicious.cold+0x4f/0xd6 dev_get_by_index_rcu+0x1d3/0x210 l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0 ip_tunnel_bind_dev+0x72f/0xa00 ip_tunnel_newlink+0x368/0x7a0 ipgre_newlink+0x14c/0x170 __rtnl_newlink+0x1173/0x19c0 rtnl_newlink+0x6c/0xa0 rtnetlink_rcv_msg+0x3cc/0xf60 netlink_rcv_skb+0x171/0x450 netlink_unicast+0x539/0x7f0 netlink_sendmsg+0x8c1/0xd80 ____sys_sendmsg+0x8f9/0xc20 ___sys_sendmsg+0x197/0x1e0 __sys_sendmsg+0x122/0x1f0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

An issue was discovered in the Linux kernel before 5.15.11. There is a memory leak in the __rds_conn_create() function in net/rds/connection.c in a certain combination of circumstances.

In the Linux kernel, the following vulnerability has been resolved: fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super When configuring a hugetlb filesystem via the fsconfig() syscall, there is a possible NULL dereference in hugetlbfs_fill_super() caused by assigning NULL to ctx->hstate in hugetlbfs_parse_param() when the requested pagesize is non valid. E.g: Taking the following steps: fd = fsopen("hugetlbfs", FSOPEN_CLOEXEC); fsconfig(fd, FSCONFIG_SET_STRING, "pagesize", "1024", 0); fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0); Given that the requested "pagesize" is invalid, ctxt->hstate will be replaced with NULL, losing its previous value, and we will print an error: ... ... case Opt_pagesize: ps = memparse(param->string, &rest); ctx->hstate = h; if (!ctx->hstate) { pr_err("Unsupported page size %lu MB\n", ps / SZ_1M); return -EINVAL; } return 0; ... ... This is a problem because later on, we will dereference ctxt->hstate in hugetlbfs_fill_super() ... ... sb->s_blocksize = huge_page_size(ctx->hstate); ... ... Causing below Oops. Fix this by replacing cxt->hstate value only when then pagesize is known to be valid. kernel: hugetlbfs: Unsupported page size 0 MB kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 800000010f66c067 P4D 800000010f66c067 PUD 1b22f8067 PMD 0 kernel: Oops: 0000 [#1] PREEMPT SMP PTI kernel: CPU: 4 PID: 5659 Comm: syscall Tainted: G E 6.8.0-rc2-default+ #22 5a47c3fef76212addcc6eb71344aabc35190ae8f kernel: Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017 kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0 kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28 kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004 kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000 kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004 kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000 kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400 kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0 kernel: Call Trace: kernel: <TASK> kernel: ? __die_body+0x1a/0x60 kernel: ? page_fault_oops+0x16f/0x4a0 kernel: ? search_bpf_extables+0x65/0x70 kernel: ? fixup_exception+0x22/0x310 kernel: ? exc_page_fault+0x69/0x150 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: ? hugetlbfs_fill_super+0xb4/0x1a0 kernel: ? hugetlbfs_fill_super+0x28/0x1a0 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: vfs_get_super+0x40/0xa0 kernel: ? __pfx_bpf_lsm_capable+0x10/0x10 kernel: vfs_get_tree+0x25/0xd0 kernel: vfs_cmd_create+0x64/0xe0 kernel: __x64_sys_fsconfig+0x395/0x410 kernel: do_syscall_64+0x80/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? exc_page_fault+0x69/0x150 kernel: entry_SYSCALL_64_after_hwframe+0x6e/0x76 kernel: RIP: 0033:0x7ffbc0cb87c9 kernel: Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 96 0d 00 f7 d8 64 89 01 48 kernel: RSP: 002b:00007ffc29d2f388 EFLAGS: 00000206 ORIG_RAX: 00000000000001af kernel: RAX: fffffffffff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix null deref accessing lag dev It could be the lag dev is null so stop processing the event. In bond_enslave() the active/backup slave being set before setting the upper dev so first event is without an upper dev. After setting the upper dev with bond_master_upper_dev_link() there is a second event and in that event we have an upper dev.

In the Linux kernel, the following vulnerability has been resolved: vfio/fsl-mc: Block calling interrupt handler without trigger The eventfd_ctx trigger pointer of the vfio_fsl_mc_irq object is initially NULL and may become NULL if the user sets the trigger eventfd to -1. The interrupt handler itself is guaranteed that trigger is always valid between request_irq() and free_irq(), but the loopback testing mechanisms to invoke the handler function need to test the trigger. The triggering and setting ioctl paths both make use of igate and are therefore mutually exclusive. The vfio-fsl-mc driver does not make use of irqfds, nor does it support any sort of masking operations, therefore unlike vfio-pci and vfio-platform, the flow can remain essentially unchanged.

In the Linux kernel, the following vulnerability has been resolved: media: ir_toy: fix a memleak in irtoy_tx When irtoy_command fails, buf should be freed since it is allocated by irtoy_tx, or there is a memleak.

In the Linux kernel, the following vulnerability has been resolved: geneve: make sure to pull inner header in geneve_rx() syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. [1] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline] BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] geneve_rx drivers/net/geneve.c:279 [inline] geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346 __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422 udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 process_backlog+0x480/0x8b0 net/core/dev.c:5976 __napi_poll+0xe3/0x980 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x8b8/0x1870 net/core/dev.c:6778 __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553 do_softirq+0x9a/0xf0 kernel/softirq.c:454 __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1296 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix memory leak This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone the skb and also make sure btmtk_process_coredump frees the skb passed following the same logic.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Avoid potential use-after-free in hci_error_reset While handling the HCI_EV_HARDWARE_ERROR event, if the underlying BT controller is not responding, the GPIO reset mechanism would free the hci_dev and lead to a use-after-free in hci_error_reset. Here's the call trace observed on a ChromeOS device with Intel AX201: queue_work_on+0x3e/0x6c __hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>] ? init_wait_entry+0x31/0x31 __hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>] hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>] process_one_work+0x1d8/0x33f worker_thread+0x21b/0x373 kthread+0x13a/0x152 ? pr_cont_work+0x54/0x54 ? kthread_blkcg+0x31/0x31 ret_from_fork+0x1f/0x30 This patch holds the reference count on the hci_dev while processing a HCI_EV_HARDWARE_ERROR event to avoid potential crash.

In the Linux kernel, the following vulnerability has been resolved: igc: avoid returning frame twice in XDP_REDIRECT When a frame can not be transmitted in XDP_REDIRECT (e.g. due to a full queue), it is necessary to free it by calling xdp_return_frame_rx_napi. However, this is the responsibility of the caller of the ndo_xdp_xmit (see for example bq_xmit_all in kernel/bpf/devmap.c) and thus calling it inside igc_xdp_xmit (which is the ndo_xdp_xmit of the igc driver) as well will lead to memory corruption. In fact, bq_xmit_all expects that it can return all frames after the last successfully transmitted one. Therefore, break for the first not transmitted frame, but do not call xdp_return_frame_rx_napi in igc_xdp_xmit. This is equally implemented in other Intel drivers such as the igb. There are two alternatives to this that were rejected: 1. Return num_frames as all the frames would have been transmitted and release them inside igc_xdp_xmit. While it might work technically, it is not what the return value is meant to represent (i.e. the number of SUCCESSFULLY transmitted packets). 2. Rework kernel/bpf/devmap.c and all drivers to support non-consecutively dropped packets. Besides being complex, it likely has a negative performance impact without a significant gain since it is anyway unlikely that the next frame can be transmitted if the previous one was dropped. The memory corruption can be reproduced with the following script which leads to a kernel panic after a few seconds. It basically generates more traffic than a i225 NIC can transmit and pushes it via XDP_REDIRECT from a virtual interface to the physical interface where frames get dropped. #!/bin/bash INTERFACE=enp4s0 INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex` sudo ip link add dev veth1 type veth peer name veth2 sudo ip link set up $INTERFACE sudo ip link set up veth1 sudo ip link set up veth2 cat << EOF > redirect.bpf.c SEC("prog") int redirect(struct xdp_md *ctx) { return bpf_redirect($INTERFACE_IDX, 0); } char _license[] SEC("license") = "GPL"; EOF clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o sudo ip link set veth2 xdp obj redirect.bpf.o cat << EOF > pass.bpf.c SEC("prog") int pass(struct xdp_md *ctx) { return XDP_PASS; } char _license[] SEC("license") = "GPL"; EOF clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o sudo ip link set $INTERFACE xdp obj pass.bpf.o cat << EOF > trafgen.cfg { /* Ethernet Header */ 0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 1, 1, # IP Src - adapt as needed 10, 0, 1, 2, # IP Dest - adapt as needed const16(6666), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } EOF sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: hfi: Add syscore callbacks for system-wide PM The kernel allocates a memory buffer and provides its location to the hardware, which uses it to update the HFI table. This allocation occurs during boot and remains constant throughout runtime. When resuming from hibernation, the restore kernel allocates a second memory buffer and reprograms the HFI hardware with the new location as part of a normal boot. The location of the second memory buffer may differ from the one allocated by the image kernel. When the restore kernel transfers control to the image kernel, its HFI buffer becomes invalid, potentially leading to memory corruption if the hardware writes to it (the hardware continues to use the buffer from the restore kernel). It is also possible that the hardware "forgets" the address of the memory buffer when resuming from "deep" suspend. Memory corruption may also occur in such a scenario. To prevent the described memory corruption, disable HFI when preparing to suspend or hibernate. Enable it when resuming. Add syscore callbacks to handle the package of the boot CPU (packages of non-boot CPUs are handled via CPU offline). Syscore ops always run on the boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend and hibernation. Syscore ops only run in these cases. [ rjw: Comment adjustment, subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_hash - Remove bogus SGL free on zero-length error path When a zero-length message is hashed by algif_hash, and an error is triggered, it tries to free an SG list that was never allocated in the first place. Fix this by not freeing the SG list on the zero-length error path.

In the Linux kernel, the following vulnerability has been resolved: md: fix kmemleak of rdev->serial If kobject_add() is fail in bind_rdev_to_array(), 'rdev->serial' will be alloc not be freed, and kmemleak occurs. unreferenced object 0xffff88815a350000 (size 49152): comm "mdadm", pid 789, jiffies 4294716910 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc f773277a): [<0000000058b0a453>] kmemleak_alloc+0x61/0xe0 [<00000000366adf14>] __kmalloc_large_node+0x15e/0x270 [<000000002e82961b>] __kmalloc_node.cold+0x11/0x7f [<00000000f206d60a>] kvmalloc_node+0x74/0x150 [<0000000034bf3363>] rdev_init_serial+0x67/0x170 [<0000000010e08fe9>] mddev_create_serial_pool+0x62/0x220 [<00000000c3837bf0>] bind_rdev_to_array+0x2af/0x630 [<0000000073c28560>] md_add_new_disk+0x400/0x9f0 [<00000000770e30ff>] md_ioctl+0x15bf/0x1c10 [<000000006cfab718>] blkdev_ioctl+0x191/0x3f0 [<0000000085086a11>] vfs_ioctl+0x22/0x60 [<0000000018b656fe>] __x64_sys_ioctl+0xba/0xe0 [<00000000e54e675e>] do_syscall_64+0x71/0x150 [<000000008b0ad622>] entry_SYSCALL_64_after_hwframe+0x6c/0x74

In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: access device through ctx instead of peer The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers.