An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. An out of bounds write is present in the data section during 6LoWPAN fragment re-assembly in the face of forged fragment offsets in os/net/ipv6/sicslowpan.c.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. Functions parsing the OIDs in SNMP requests lack sufficient allocated target-buffer capacity verification when writing parsed OID values. The function snmp_oid_decode_oid() may overwrite memory areas beyond the provided target buffer, when called from snmp_message_decode() upon an SNMP request reception. Because the content of the write operations is externally provided in the SNMP requests, it enables a remote overwrite of an IoT device's memory regions beyond the allocated buffer. This overflow may allow remote overwrite of stack and statically allocated variables memory regions by sending a crafted SNMP request.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. If the number of variables in the request exceeds the allocated buffer, a memory write out of the buffer boundaries occurs. This write operation provides a possibility to overwrite other variables allocated in the .bss section by the application. Because the sender of the frame is in control of the content that will be written beyond the buffer limits, and there is no strict process memory separation, this issue may allow overwriting of sensitive memory areas of an IoT device.

The Contiki-NG operating system versions 4.8 and prior can be triggered to dereference a NULL pointer in the message handling code for IPv6 router solicitiations. Contiki-NG contains an implementation of IPv6 Neighbor Discovery (ND) in the module `os/net/ipv6/uip-nd6.c`. The ND protocol includes a message type called Router Solicitation (RS), which is used to locate routers and update their address information via the SLLAO (Source Link-Layer Address Option). If the indicated source address changes, a given neighbor entry is set to the STALE state. The message handler does not check for RS messages with an SLLAO that indicates a link-layer address change that a neighbor entry can actually be created for the indicated address. The resulting pointer is used without a check, leading to the dereference of a NULL pointer of type `uip_ds6_nbr_t`. The problem has been patched in the `develop` branch of Contiki-NG, and will be included in the upcoming 4.9 release. As a workaround, users can apply Contiki-NG pull request #2271 to patch the problem directly.

contiki-ng version 4 contains a Buffer Overflow vulnerability in AQL (Antelope Query Language) database engine that can result in Attacker can perform Remote Code Execution on device using Contiki-NG operating system. This attack appear to be exploitable via Attacker must be able to run malicious AQL code (e.g. via SQL-like Injection attack).

Contiki-NG is an operating system for Internet of Things devices. An off-by-one error can be triggered in the Antelope database management system in the Contiki-NG operating system in versions 4.8 and prior. The problem exists in the Contiki File System (CFS) backend for the storage of data (file os/storage/antelope/storage-cfs.c). In the functions `storage_get_index` and `storage_put_index`, a buffer for merging two strings is allocated with one byte less than the maximum size of the merged strings, causing subsequent function calls to the cfs_open function to read from memory beyond the buffer size. The vulnerability has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. As a workaround, the problem can be fixed by applying the patch in Contiki-NG pull request #2425.

An issue was discovered in Contiki-NG tinyDTLS through 2018-08-30. One incorrect handshake could complete with different epoch numbers in the packets Client_Hello, Client_key_exchange, and Change_cipher_spec, which may cause denial of service.

Buffer over-read vulnerability in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers obtain sensitive information via crafted input to dtls_ccm_decrypt_message().

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. In versions prior to 4.5, buffer overflow can be triggered by an input packet when using either of Contiki-NG's two RPL implementations in source-routing mode. The problem has been patched in Contiki-NG 4.5. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. A buffer overflow vulnerability exists in Contiki-NG versions prior to 4.6. After establishing a TCP socket using the tcp-socket library, it is possible for the remote end to send a packet with a data offset that is unvalidated. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

An issue was discovered in Contiki through 3.0 and Contiki-NG through 4.5. The code for parsing Type A domain name answers in ip64-dns64.c doesn't verify whether the address in the answer's length is sane. Therefore, when copying an address of an arbitrary length, a buffer overflow can occur. This bug can be exploited whenever NAT64 is enabled.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. In the RPL-Classic routing protocol implementation in the Contiki-NG operating system, an incoming DODAG Information Option (DIO) control message can contain a prefix information option with a length parameter. The value of the length parameter is not validated, however, and it is possible to cause a buffer overflow when copying the prefix in the set_ip_from_prefix function. This vulnerability affects anyone running a Contiki-NG version prior to 4.7 that can receive RPL DIO messages from external parties. To obtain a patched version, users should upgrade to Contiki-NG 4.7 or later. There are no workarounds for this issue.

An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. DTLS servers mishandle the early use of a large epoch number. This vulnerability allows remote attackers to cause a denial of service and false-positive packet drops.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. The RPL-Classic and RPL-Lite implementations in the Contiki-NG operating system versions prior to 4.6 do not validate the address pointer in the RPL source routing header This makes it possible for an attacker to cause out-of-bounds writes with packets injected into the network stack. Specifically, the problem lies in the rpl_ext_header_srh_update function in the two rpl-ext-header.c modules for RPL-Classic and RPL-Lite respectively. The addr_ptr variable is calculated using an unvalidated CMPR field value from the source routing header. An out-of-bounds write can be triggered on line 151 in os/net/routing/rpl-lite/rpl-ext-header.c and line 261 in os/net/routing/rpl-classic/rpl-ext-header.c, which contain the following memcpy call with addr_ptr as destination. The problem has been patched in Contiki-NG 4.6. Users can apply a patch out-of-band as a workaround.

An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. A buffer overflow is present due to an integer underflow during 6LoWPAN fragment processing in the face of truncated fragments in os/net/ipv6/sicslowpan.c. This results in accesses of unmapped memory, crashing the application. An attacker can cause a denial-of-service via a crafted 6LoWPAN frame.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds write exists in the driver for IEEE 802.15.4 radios on nRF platforms in the Contiki-NG operating system. The problem is triggered when parsing radio frames in the `read_frame` function in the `arch/cpu/nrf/net/nrf-ieee-driver-arch.c` module. More specifically, the `read_frame` function performs an incomplete validation of the payload length of the packet, which is a value that can be set by an external party that sends radio packets to a Contiki-NG system. Although the value is validated to be in the range of the MTU length, it is not validated to fit into the given buffer into which the packet will be copied. The problem has been patched in the "develop" branch of Contiki-NG and is expected to be included in subsequent releases. Users are advised to update their develop branch or to update to a subsequent release when available. Users unable to upgrade should consider manually applying the changes in PR #2741.

An issue was discovered in Contiki-NG through 4.1. There is a stack-based buffer overflow in parse_relations in os/storage/antelope/aql-parser.c while parsing AQL (storage of relations).

An issue was discovered in Contiki-NG through 4.1. There is a stack-based buffer overflow in next_string in os/storage/antelope/aql-lexer.c while parsing AQL (parsing next string).

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 are vulnerable to an Out-of-bounds read. While processing the L2CAP protocol, the Bluetooth Low Energy stack of Contiki-NG needs to map an incoming channel ID to its metadata structure. While looking up the corresponding channel structure in get_channel_for_cid (in os/net/mac/ble/ble-l2cap.c), a bounds check is performed on the incoming channel ID, which is meant to ensure that the channel ID does not exceed the maximum number of supported channels.However, an integer truncation issue leads to only the lowest byte of the channel ID to be checked, which leads to an incomplete out-of-bounds check. A crafted channel ID leads to out-of-bounds memory to be read and written with attacker-controlled data. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. As a workaround, Users can apply the patch in Contiki-NG pull request 2081 on GitHub.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to and including 4.8 are vulnerable to an out-of-bounds write that can occur in the BLE-L2CAP module. The Bluetooth Low Energy - Logical Link Control and Adaptation Layer Protocol (BLE-L2CAP) module handles fragmentation of packets up the configured MTU size. When fragments are reassembled, they are stored in a packet buffer of a configurable size, but there is no check to verify that the packet buffer is large enough to hold the reassembled packet. In Contiki-NG's default configuration, it is possible that an out-of-bounds write of up to 1152 bytes occurs. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be fixed by applying the patch in Contiki-NG pull request #2254 prior to the release of version 4.9.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in the Contiki-NG operating system (file os/net/ipv6/sicslowpan.c) contains an input function that processes incoming packets and copies them into a packet buffer. Because of a missing length check in the input function, it is possible to write outside the packet buffer's boundary. The vulnerability can be exploited by anyone who has the possibility to send 6LoWPAN packets to a Contiki-NG system. In particular, the vulnerability is exposed when sending either of two types of 6LoWPAN packets: an unfragmented packet or the first fragment of a fragmented packet. If the packet is sufficiently large, a subsequent memory copy will cause an out-of-bounds write with data supplied by the attacker.

Memory access out of buffer boundaries issues was discovered in Contiki-NG 4.4 through 4.5, in the SNMP BER encoder/decoder. The length of provided input/output buffers is insufficiently verified during the encoding and decoding of data. This may lead to out-of-bounds buffer read or write access in BER decoding and encoding functions.

Adobe Illustrator CC versions 23.1 and earlier have a memory corruption vulnerability. Successful exploitation could lead to arbitrary code execution .

PDFAlto v0.4 was discovered to contain a heap buffer overflow via the component /pdfalto/src/pdfalto.cc.

In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger writes outside of bounds of heap allocated buffers by inserting negative elements in the segment ids tensor. Users having access to `segment_ids_data` can alter `output_index` and then write to outside of `output_data` buffer. This might result in a segmentation fault but it can also be used to further corrupt the memory and can be chained with other vulnerabilities to create more advanced exploits. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that the segment ids are all positive, although this only handles the case when the segment ids are stored statically in the model. A similar validation could be done if the segment ids are generated at runtime between inference steps. If the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code.

A vulnerability was found in Tenda AC8V4 V16.03.34.06. Affected is the function SUB_0046AC38 of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto leads to stack-based buffer overflow.

Stack-based buffer overflow in SonicWall SMA100 allows an unauthenticated user to execute arbitrary code in function libSys.so. This vulnerability impacted SMA100 version 9.0.0.3 and earlier.

Adobe Acrobat and Reader versions 2019.012.20035 and earlier, 2019.012.20035 and earlier, 2017.011.30142 and earlier, 2017.011.30143 and earlier, 2015.006.30497 and earlier, and 2015.006.30498 and earlier have an out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution .

UltraVNC revision 1203 has out-of-bounds access vulnerability in VNC client inside Ultra2 decoder, which can potentially result in code execution. This attack appears to be exploitable via network connectivity. This vulnerability has been fixed in revision 1204.

UltraVNC revision 1207 has multiple out-of-bounds access vulnerabilities connected with improper usage of ClientConnection::Copybuffer function in VNC client code, which can potentially result in code execution. This attack appears to be exploitable via network connectivity. User interaction is required to trigger these vulnerabilities. These vulnerabilities have been fixed in revision 1208.

Adobe Acrobat and Reader versions 2019.012.20035 and earlier, 2019.012.20035 and earlier, 2017.011.30142 and earlier, 2017.011.30143 and earlier, 2015.006.30497 and earlier, and 2015.006.30498 and earlier have an out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution .

D-Link DIR-853 A1 FW1.20B07 was discovered to contain a stack-based buffer overflow vulnerability via the Password parameter in the SetWanSettings module.

A heap-based buffer overflow vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2.0 through 7.2.11, FortiOS 7.0.0 through 7.0.17, FortiOS 6.4 all versions, FortiSwitchManager 7.2.0 through 7.2.6, FortiSwitchManager 7.0.0 through 7.0.5 allows attacker to execute unauthorized code or commands via specially crafted packets

Heap-based buffer overflow in the SvrAppendReceivedChunk function in xlsasink.dll in the SMTP service of Exchange Server 2000 and 2003 allows remote attackers to execute arbitrary code via a crafted X-LINK2STATE extended verb request to the SMTP port.

Certain HP LaserJet Pro, HP LaserJet Enterprise, and HP LaserJet Managed Printers may potentially be vulnerable to Remote Code Execution and Elevation of Privilege when processing a PostScript print job.

A vulnerability, which was classified as critical, was found in D-Link DAP-1620 1.03. This affects the function check_dws_cookie of the file /storage of the component Cookie Handler. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Adobe Acrobat and Reader versions 2019.012.20035 and earlier, 2019.012.20035 and earlier, 2017.011.30142 and earlier, 2017.011.30143 and earlier, 2015.006.30497 and earlier, and 2015.006.30498 and earlier have a heap overflow vulnerability. Successful exploitation could lead to arbitrary code execution .

Adobe Media Encoder versions 13.1 and earlier have an out-of-bounds write vulnerability. Successful exploitation could lead to arbitrary code execution .

UltraVNC revision 1198 has a heap buffer overflow vulnerability in VNC client code which results code execution. This attack appears to be exploitable via network connectivity. This vulnerability has been fixed in revision 1199.

UltraVNC revision 1211 has a heap buffer overflow vulnerability in VNC server code inside file transfer offer handler, which can potentially in result code execution. This attack appears to be exploitable via network connectivity. This vulnerability has been fixed in revision 1212.

In nDPI through 3.2, there is a stack overflow in extractRDNSequence in lib/protocols/tls.c.

Adobe Acrobat and Reader versions 2019.012.20035 and earlier, 2019.012.20035 and earlier, 2017.011.30142 and earlier, 2017.011.30143 and earlier, 2015.006.30497 and earlier, and 2015.006.30498 and earlier have a heap overflow vulnerability. Successful exploitation could lead to arbitrary code execution .

UltraVNC revision 1203 has multiple heap buffer overflow vulnerabilities in VNC client code inside Ultra decoder, which results in code execution. This attack appears to be exploitable via network connectivity. These vulnerabilities have been fixed in revision 1204.

examples/benchmark/tls_bench.c in a benchmark tool in wolfSSL through 3.15.7 has a heap-based buffer overflow.

A vulnerability was found in D-Link DAP-1620 1.03 and classified as critical. This issue affects the function check_dws_cookie of the file /storage. The manipulation of the argument uid leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.