Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in Contiki-NG may cast a UDP header structure at a certain offset in a packet buffer. The code does not check whether the packet buffer is large enough to fit a full UDP header structure from the offset where the casting is made. Hence, it is possible to cause an out-of-bounds read beyond the packet buffer. The problem affects anyone running devices with Contiki-NG versions previous to 4.8, and which may receive 6LoWPAN packets from external parties. The problem has been patched in Contiki-NG version 4.8.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The low-power IPv6 network stack of Contiki-NG has a buffer module (os/net/ipv6/uipbuf.c) that processes IPv6 extension headers in incoming data packets. As part of this processing, the function uipbuf_get_next_header casts a pointer to a uip_ext_hdr structure into the packet buffer at different offsets where extension headers are expected to be found, and then reads from this structure. Because of a lack of bounds checking, the casting can be done so that the structure extends beyond the packet's end. Hence, with a carefully crafted packet, it is possible to cause the Contiki-NG system to read data outside the packet buffer. A patch that fixes the vulnerability is included in Contiki-NG 4.8.

An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. An out of bounds write is present in the data section during 6LoWPAN fragment re-assembly in the face of forged fragment offsets in os/net/ipv6/sicslowpan.c.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to and including 4.8 are vulnerable to an out-of-bounds write that can occur in the BLE-L2CAP module. The Bluetooth Low Energy - Logical Link Control and Adaptation Layer Protocol (BLE-L2CAP) module handles fragmentation of packets up the configured MTU size. When fragments are reassembled, they are stored in a packet buffer of a configurable size, but there is no check to verify that the packet buffer is large enough to hold the reassembled packet. In Contiki-NG's default configuration, it is possible that an out-of-bounds write of up to 1152 bytes occurs. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be fixed by applying the patch in Contiki-NG pull request #2254 prior to the release of version 4.9.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 are vulnerable to an Out-of-bounds read. While processing the L2CAP protocol, the Bluetooth Low Energy stack of Contiki-NG needs to map an incoming channel ID to its metadata structure. While looking up the corresponding channel structure in get_channel_for_cid (in os/net/mac/ble/ble-l2cap.c), a bounds check is performed on the incoming channel ID, which is meant to ensure that the channel ID does not exceed the maximum number of supported channels.However, an integer truncation issue leads to only the lowest byte of the channel ID to be checked, which leads to an incomplete out-of-bounds check. A crafted channel ID leads to out-of-bounds memory to be read and written with attacker-controlled data. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. As a workaround, Users can apply the patch in Contiki-NG pull request 2081 on GitHub.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. It is possible to cause an out-of-bounds write in versions of Contiki-NG prior to 4.6 when transmitting a 6LoWPAN packet with a chain of extension headers. Unfortunately, the written header is not checked to be within the available space, thereby making it possible to write outside the buffer. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. The RPL-Classic and RPL-Lite implementations in the Contiki-NG operating system versions prior to 4.6 do not validate the address pointer in the RPL source routing header This makes it possible for an attacker to cause out-of-bounds writes with packets injected into the network stack. Specifically, the problem lies in the rpl_ext_header_srh_update function in the two rpl-ext-header.c modules for RPL-Classic and RPL-Lite respectively. The addr_ptr variable is calculated using an unvalidated CMPR field value from the source routing header. An out-of-bounds write can be triggered on line 151 in os/net/routing/rpl-lite/rpl-ext-header.c and line 261 in os/net/routing/rpl-classic/rpl-ext-header.c, which contain the following memcpy call with addr_ptr as destination. The problem has been patched in Contiki-NG 4.6. Users can apply a patch out-of-band as a workaround.

An issue was discovered in Contiki-NG through 4.1. There is a stack-based buffer overflow in parse_relations in os/storage/antelope/aql-parser.c while parsing AQL (storage of relations).

An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. A buffer overflow is present due to an integer underflow during 6LoWPAN fragment processing in the face of truncated fragments in os/net/ipv6/sicslowpan.c. This results in accesses of unmapped memory, crashing the application. An attacker can cause a denial-of-service via a crafted 6LoWPAN frame.

An issue was discovered in Contiki-NG through 4.1. There is a stack-based buffer overflow in next_string in os/storage/antelope/aql-lexer.c while parsing AQL (parsing next string).

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. Functions parsing the OIDs in SNMP requests lack sufficient allocated target-buffer capacity verification when writing parsed OID values. The function snmp_oid_decode_oid() may overwrite memory areas beyond the provided target buffer, when called from snmp_message_decode() upon an SNMP request reception. Because the content of the write operations is externally provided in the SNMP requests, it enables a remote overwrite of an IoT device's memory regions beyond the allocated buffer. This overflow may allow remote overwrite of stack and statically allocated variables memory regions by sending a crafted SNMP request.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. If the number of variables in the request exceeds the allocated buffer, a memory write out of the buffer boundaries occurs. This write operation provides a possibility to overwrite other variables allocated in the .bss section by the application. Because the sender of the frame is in control of the content that will be written beyond the buffer limits, and there is no strict process memory separation, this issue may allow overwriting of sensitive memory areas of an IoT device.

Memory access out of buffer boundaries issues was discovered in Contiki-NG 4.4 through 4.5, in the SNMP BER encoder/decoder. The length of provided input/output buffers is insufficiently verified during the encoding and decoding of data. This may lead to out-of-bounds buffer read or write access in BER decoding and encoding functions.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds write exists in the driver for IEEE 802.15.4 radios on nRF platforms in the Contiki-NG operating system. The problem is triggered when parsing radio frames in the `read_frame` function in the `arch/cpu/nrf/net/nrf-ieee-driver-arch.c` module. More specifically, the `read_frame` function performs an incomplete validation of the payload length of the packet, which is a value that can be set by an external party that sends radio packets to a Contiki-NG system. Although the value is validated to be in the range of the MTU length, it is not validated to fit into the given buffer into which the packet will be copied. The problem has been patched in the "develop" branch of Contiki-NG and is expected to be included in subsequent releases. Users are advised to update their develop branch or to update to a subsequent release when available. Users unable to upgrade should consider manually applying the changes in PR #2741.

A vulnerability has been found in Tenda W15E 15.11.0.14 and classified as critical. Affected by this vulnerability is the function formDelDhcpRule of the file /goform/DelDhcpRule. The manipulation of the argument delDhcpIndex leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261859. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the PPPOEPassword parameter at ip/goform/QuickIndex.

A vulnerability was found in Tenda 4G300 1.01.42. It has been classified as critical. This affects the function sub_4260F0. The manipulation of the argument upfilen leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The associated identifier of this vulnerability is VDB-261987. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W15E 15.11.0.14. It has been classified as critical. Affected is the function guestWifiRuleRefresh. The manipulation of the argument qosGuestDownstream leads to stack-based buffer overflow. It is possible to launch the attack remotely. VDB-261870 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda 4G300 1.01.42. It has been rated as critical. This issue affects the function sub_429A30. The manipulation of the argument list1 leads to stack-based buffer overflow. The attack may be initiated remotely. The identifier VDB-261989 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W15E 15.11.0.14. It has been rated as critical. This issue affects the function formIPMacBindModify of the file /goform/modifyIpMacBind. The manipulation of the argument IPMacBindRuleId/IPMacBindRuleIp/IPMacBindRuleMac/IPMacBindRuleRemark leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261863. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W15E 15.11.0.14. It has been classified as critical. This affects the function formIPMacBindAdd of the file /goform/addIpMacBind. The manipulation of the argument IPMacBindRule leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261861 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Tenda W15E 15.11.0.14. Affected by this vulnerability is the function formSetDebugCfg of the file /goform/setDebugCfg. The manipulation of the argument enable/level/module leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261865 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Tenda TX9 22.03.02.10. This issue affects the function sub_42C014 of the file /goform/PowerSaveSet. The manipulation of the argument time leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261857 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W15E 15.11.0.14 and classified as critical. Affected by this issue is the function formDelPortMapping of the file /goform/DelPortMapping. The manipulation of the argument portMappingIndex leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261860. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Tenda W15E 15.11.0.14. Affected is the function formQOSRuleDel. The manipulation of the argument qosIndex leads to stack-based buffer overflow. It is possible to launch the attack remotely. The identifier of this vulnerability is VDB-261864. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W15E 15.11.0.14. It has been declared as critical. This vulnerability affects the function formIPMacBindDel of the file /goform/delIpMacBind. The manipulation of the argument IPMacBindIndex leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-261862 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda 4G300 1.01.42 and classified as critical. Affected by this vulnerability is the function sub_41E858. The manipulation of the argument GO/page leads to stack-based buffer overflow. The attack can be launched remotely. The identifier VDB-261985 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Tenda TX9 22.03.02.10. This affects the function sub_42CB94 of the file /goform/SetVirtualServerCfg. The manipulation of the argument list leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261855. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda 4G300 1.01.42 and classified as critical. Affected by this issue is the function sub_422AA4. The manipulation of the argument year/month/day/hour/minute/second leads to stack-based buffer overflow. The attack may be launched remotely. VDB-261986 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda 4G300 1.01.42. It has been declared as critical. This vulnerability affects the function sub_42775C/sub_4279CC. The manipulation of the argument page leads to stack-based buffer overflow. The attack can be initiated remotely. The identifier of this vulnerability is VDB-261988. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Tenda W15E 15.11.0.14. This affects the function formSetRemoteWebManage of the file /goform/SetRemoteWebManage. The manipulation of the argument remoteIP leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261867. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda W15E 15.11.0.14 and classified as critical. This vulnerability affects the function formSetStaticRoute of the file /goform/setStaticRoute. The manipulation of the argument staticRouteIndex leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261868. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W15E 15.11.0.14 and classified as critical. This issue affects the function formSetSysTime of the file /goform/SetSysTimeCfg. The manipulation of the argument manualTime leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261869 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC8 16.03.34.09. It has been rated as critical. This issue affects the function formSetRebootTimer of the file /goform/SetRebootTimer. The manipulation of the argument rebootTime leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261791. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Tenda RX3 16.03.13.11. This issue affects the function formSetDeviceName of the file /goform/SetOnlineDevName. The manipulation of the argument devName leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Tenda W30E 1.0.1.25(633). This affects the function formSetCfm of the file /goform/setcfm. The manipulation of the argument funcpara1 leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-260913 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. Filesystem bugs due to corrupt images are not considered a CVE for any filesystem that is only mountable by CAP_SYS_ADMIN in the initial user namespace. That includes delegated mounting.

A stack-based buffer overflow vulnerability [CWE-121] in the CA sign functionality of FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.19 and below may allow an authenticated attacker to achieve arbitrary code execution via specifically crafted password.

A vulnerability, which was classified as critical, has been found in Tenda F1202 1.2.0.20(408). Affected by this issue is the function fromwebExcptypemanFilter of the file /goform/webExcptypemanFilter. The manipulation of the argument page leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-260912. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Tenda AC500 2.0.1.9(1307). Affected by this vulnerability is the function formexeCommand of the file /goform/execCommand. The manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261145 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda W30E 1.0.1.25(633) and classified as critical. This issue affects the function frmL7PlotForm of the file /goform/frmL7ProtForm. The manipulation of the argument page leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-260915. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC500 2.0.1.9(1307). It has been rated as critical. This issue affects the function formSetCfm of the file /goform/setcfm. The manipulation of the argument funcpara1 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261143. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC1206 15.03.06.23. It has been classified as critical. Affected is the function form_fast_setting_wifi_set of the file /goform/fast_setting_wifi_set. The manipulation of the argument ssid/timeZone leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.

A vulnerability classified as critical was found in Tenda F1202 1.2.0.20(408). Affected by this vulnerability is the function fromqossetting of the file /goform/fromqossetting. The manipulation of the argument qos leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-260911. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC500 2.0.1.9(1307). It has been declared as critical. This vulnerability affects the function formQuickIndex of the file /goform/QuickIndex. The manipulation of the argument PPPOEPassword leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-261142 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC500 2.0.1.9(1307). It has been classified as critical. This affects the function R7WebsSecurityHandler of the file /goform/execCommand. The manipulation of the argument password leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261141 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Tenda AC500 2.0.1.9(1307). Affected by this issue is the function fromDhcpListClient of the file /goform/DhcpListClient. The manipulation of the argument page leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-261146 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda F1202 1.2.0.20(408). It has been rated as critical. This issue affects the function fromNatlimit of the file /goform/Natlimit. The manipulation of the argument page leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-260909 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.