Contiki-NG is an open-source, cross-platform operating system for internet of things devices. It is possible to cause an out-of-bounds write in versions of Contiki-NG prior to 4.6 when transmitting a 6LoWPAN packet with a chain of extension headers. Unfortunately, the written header is not checked to be within the available space, thereby making it possible to write outside the buffer. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. Functions parsing the OIDs in SNMP requests lack sufficient allocated target-buffer capacity verification when writing parsed OID values. The function snmp_oid_decode_oid() may overwrite memory areas beyond the provided target buffer, when called from snmp_message_decode() upon an SNMP request reception. Because the content of the write operations is externally provided in the SNMP requests, it enables a remote overwrite of an IoT device's memory regions beyond the allocated buffer. This overflow may allow remote overwrite of stack and statically allocated variables memory regions by sending a crafted SNMP request.

An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. An out of bounds write is present in the data section during 6LoWPAN fragment re-assembly in the face of forged fragment offsets in os/net/ipv6/sicslowpan.c.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. In versions prior to 4.5, buffer overflow can be triggered by an input packet when using either of Contiki-NG's two RPL implementations in source-routing mode. The problem has been patched in Contiki-NG 4.5. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. A buffer overflow vulnerability exists in Contiki-NG versions prior to 4.6. After establishing a TCP socket using the tcp-socket library, it is possible for the remote end to send a packet with a data offset that is unvalidated. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. In the RPL-Classic routing protocol implementation in the Contiki-NG operating system, an incoming DODAG Information Option (DIO) control message can contain a prefix information option with a length parameter. The value of the length parameter is not validated, however, and it is possible to cause a buffer overflow when copying the prefix in the set_ip_from_prefix function. This vulnerability affects anyone running a Contiki-NG version prior to 4.7 that can receive RPL DIO messages from external parties. To obtain a patched version, users should upgrade to Contiki-NG 4.7 or later. There are no workarounds for this issue.

Contiki-NG is an operating system for Internet of Things devices. An off-by-one error can be triggered in the Antelope database management system in the Contiki-NG operating system in versions 4.8 and prior. The problem exists in the Contiki File System (CFS) backend for the storage of data (file os/storage/antelope/storage-cfs.c). In the functions `storage_get_index` and `storage_put_index`, a buffer for merging two strings is allocated with one byte less than the maximum size of the merged strings, causing subsequent function calls to the cfs_open function to read from memory beyond the buffer size. The vulnerability has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. As a workaround, the problem can be fixed by applying the patch in Contiki-NG pull request #2425.

The Contiki-NG operating system versions 4.8 and prior can be triggered to dereference a NULL pointer in the message handling code for IPv6 router solicitiations. Contiki-NG contains an implementation of IPv6 Neighbor Discovery (ND) in the module `os/net/ipv6/uip-nd6.c`. The ND protocol includes a message type called Router Solicitation (RS), which is used to locate routers and update their address information via the SLLAO (Source Link-Layer Address Option). If the indicated source address changes, a given neighbor entry is set to the STALE state. The message handler does not check for RS messages with an SLLAO that indicates a link-layer address change that a neighbor entry can actually be created for the indicated address. The resulting pointer is used without a check, leading to the dereference of a NULL pointer of type `uip_ds6_nbr_t`. The problem has been patched in the `develop` branch of Contiki-NG, and will be included in the upcoming 4.9 release. As a workaround, users can apply Contiki-NG pull request #2271 to patch the problem directly.

contiki-ng version 4 contains a Buffer Overflow vulnerability in AQL (Antelope Query Language) database engine that can result in Attacker can perform Remote Code Execution on device using Contiki-NG operating system. This attack appear to be exploitable via Attacker must be able to run malicious AQL code (e.g. via SQL-like Injection attack).

An issue was discovered in Contiki-NG tinyDTLS through 2018-08-30. One incorrect handshake could complete with different epoch numbers in the packets Client_Hello, Client_key_exchange, and Change_cipher_spec, which may cause denial of service.

Buffer over-read vulnerability in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers obtain sensitive information via crafted input to dtls_ccm_decrypt_message().

An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. DTLS servers mishandle the early use of a large epoch number. This vulnerability allows remote attackers to cause a denial of service and false-positive packet drops.

An issue was discovered in Contiki through 3.0 and Contiki-NG through 4.5. The code for parsing Type A domain name answers in ip64-dns64.c doesn't verify whether the address in the answer's length is sane. Therefore, when copying an address of an arbitrary length, a buffer overflow can occur. This bug can be exploited whenever NAT64 is enabled.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. The RPL-Classic and RPL-Lite implementations in the Contiki-NG operating system versions prior to 4.6 do not validate the address pointer in the RPL source routing header This makes it possible for an attacker to cause out-of-bounds writes with packets injected into the network stack. Specifically, the problem lies in the rpl_ext_header_srh_update function in the two rpl-ext-header.c modules for RPL-Classic and RPL-Lite respectively. The addr_ptr variable is calculated using an unvalidated CMPR field value from the source routing header. An out-of-bounds write can be triggered on line 151 in os/net/routing/rpl-lite/rpl-ext-header.c and line 261 in os/net/routing/rpl-classic/rpl-ext-header.c, which contain the following memcpy call with addr_ptr as destination. The problem has been patched in Contiki-NG 4.6. Users can apply a patch out-of-band as a workaround.

An issue was discovered in Contiki-NG through 4.1. There is a stack-based buffer overflow in next_string in os/storage/antelope/aql-lexer.c while parsing AQL (parsing next string).

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to and including 4.8 are vulnerable to an out-of-bounds write that can occur in the BLE-L2CAP module. The Bluetooth Low Energy - Logical Link Control and Adaptation Layer Protocol (BLE-L2CAP) module handles fragmentation of packets up the configured MTU size. When fragments are reassembled, they are stored in a packet buffer of a configurable size, but there is no check to verify that the packet buffer is large enough to hold the reassembled packet. In Contiki-NG's default configuration, it is possible that an out-of-bounds write of up to 1152 bytes occurs. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be fixed by applying the patch in Contiki-NG pull request #2254 prior to the release of version 4.9.

An issue was discovered in Contiki-NG through 4.1. There is a stack-based buffer overflow in parse_relations in os/storage/antelope/aql-parser.c while parsing AQL (storage of relations).

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 are vulnerable to an Out-of-bounds read. While processing the L2CAP protocol, the Bluetooth Low Energy stack of Contiki-NG needs to map an incoming channel ID to its metadata structure. While looking up the corresponding channel structure in get_channel_for_cid (in os/net/mac/ble/ble-l2cap.c), a bounds check is performed on the incoming channel ID, which is meant to ensure that the channel ID does not exceed the maximum number of supported channels.However, an integer truncation issue leads to only the lowest byte of the channel ID to be checked, which leads to an incomplete out-of-bounds check. A crafted channel ID leads to out-of-bounds memory to be read and written with attacker-controlled data. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. As a workaround, Users can apply the patch in Contiki-NG pull request 2081 on GitHub.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds write exists in the driver for IEEE 802.15.4 radios on nRF platforms in the Contiki-NG operating system. The problem is triggered when parsing radio frames in the `read_frame` function in the `arch/cpu/nrf/net/nrf-ieee-driver-arch.c` module. More specifically, the `read_frame` function performs an incomplete validation of the payload length of the packet, which is a value that can be set by an external party that sends radio packets to a Contiki-NG system. Although the value is validated to be in the range of the MTU length, it is not validated to fit into the given buffer into which the packet will be copied. The problem has been patched in the "develop" branch of Contiki-NG and is expected to be included in subsequent releases. Users are advised to update their develop branch or to update to a subsequent release when available. Users unable to upgrade should consider manually applying the changes in PR #2741.

An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. A buffer overflow is present due to an integer underflow during 6LoWPAN fragment processing in the face of truncated fragments in os/net/ipv6/sicslowpan.c. This results in accesses of unmapped memory, crashing the application. An attacker can cause a denial-of-service via a crafted 6LoWPAN frame.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in the Contiki-NG operating system (file os/net/ipv6/sicslowpan.c) contains an input function that processes incoming packets and copies them into a packet buffer. Because of a missing length check in the input function, it is possible to write outside the packet buffer's boundary. The vulnerability can be exploited by anyone who has the possibility to send 6LoWPAN packets to a Contiki-NG system. In particular, the vulnerability is exposed when sending either of two types of 6LoWPAN packets: an unfragmented packet or the first fragment of a fragmented packet. If the packet is sufficiently large, a subsequent memory copy will cause an out-of-bounds write with data supplied by the attacker.

Memory access out of buffer boundaries issues was discovered in Contiki-NG 4.4 through 4.5, in the SNMP BER encoder/decoder. The length of provided input/output buffers is insufficiently verified during the encoding and decoding of data. This may lead to out-of-bounds buffer read or write access in BER decoding and encoding functions.

In cd_CodeMsg of cd_codec.c, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-250100597References: N/A

In SDP_AddAttribute of sdp_db.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-261867748

Buffer overflow in system firmware for EDK II may allow unauthenticated user to potentially enable escalation of privilege and/or denial of service via network access.

A memory corruption vulnerability exists in the Windows Server DHCP service when an attacker sends specially crafted packets to a DHCP failover server, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka 'Windows DHCP Client Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0698, CVE-2019-0726.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka 'Windows DHCP Client Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0697, CVE-2019-0698.

In ixheaacd_adts_crc_start_reg of ixheaacd_adts_crc_check.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android-9. Android ID: A-113261928.

Google V8, as used in Google Chrome before 15.0.874.121, allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors that trigger an out-of-bounds write operation.

A memory corruption vulnerability exists in the Windows Server DHCP service when an attacker sends specially crafted packets to a DHCP server, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.

In CDMA PPP protocol, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privilege needed. User interaction is not needed for exploitation. Patch ID: MOLY01068234; Issue ID: ALPS08010003.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client. An attacker who successfully exploited the vulnerability could run arbitrary code on the client machine. To exploit the vulnerability, an attacker could send specially crafted DHCP responses to a client. The security update addresses the vulnerability by correcting how Windows DHCP clients handle certain DHCP responses.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka 'Windows DHCP Client Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0697, CVE-2019-0726.

A memory corruption vulnerability exists in the Windows Server DHCP service when processing specially crafted packets, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.

In impeg2d_mc_fullx_fully of impeg2d_mc.c there is a possible out of bound write due to missing bounds check. This could lead to remote arbitrary code execution with no additional execution privileges needed. User interaction is needed for exploitation.

Google V8, as used in Google Chrome before 13.0.782.215, allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors that trigger an out-of-bounds write.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka "Microsoft Exchange Memory Corruption Vulnerability." This affects Microsoft Exchange Server.

In gatt_end_operation of gatt_utils.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

In the deserialization constructor of NanoAppFilter.java, there is a possible loss of data due to type confusion. This could lead to local escalation of privilege in the system server with no additional execution privileges needed. User interaction is not needed for exploitation.

The VMware vCenter Server contains a memory corruption vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may trigger a memory corruption vulnerability which may bypass authentication.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Improper access control settings in ASP Bootloader may allow an attacker to corrupt the return address causing a stack-based buffer overrun potentially leading to arbitrary code execution.

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. Within `DecodeTreeBlock` which is called during the decompression of an XMI file, a UINT32 is loaded from the file and used as trusted input as the length of a buffer. An attacker can provide a malicious file to trigger this vulnerability.

A malicious DNS response can trigger a number of OOB reads, writes, and other memory issues

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress_segment() that results in a memory corruption and probably even a remote code execution.

In lcsm_SendRrAcquiAssist of lcsm_bcm_assist.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-246169606References: N/A