An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. A buffer overflow is present due to an integer underflow during 6LoWPAN fragment processing in the face of truncated fragments in os/net/ipv6/sicslowpan.c. This results in accesses of unmapped memory, crashing the application. An attacker can cause a denial-of-service via a crafted 6LoWPAN frame.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds read can be caused by an incoming DIO message when using the RPL-Lite implementation in the Contiki-NG operating system. More specifically, the prefix information of the DIO message contains a field that specifies the length of an IPv6 address prefix. The value of this field is not validated, which means that an attacker can set a value that is longer than the maximum prefix length. Subsequently, a memcmp function call that compares different prefixes can be called with a length argument that surpasses the boundary of the array allocated for the prefix, causing an out-of-bounds read. The problem has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. Users are advised to update as soon as they are able to or to manually apply the changes in Contiki-NG pull request #2721.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An attacker can trigger out-of-bounds reads in the RPL-Lite implementation of the RPL protocol in the Contiki-NG operating system. This vulnerability is caused by insufficient control of the lengths for DIO and DAO messages, in particular when they contain RPL sub-option headers. The problem has been patched in Contiki-NG 4.9. Users are advised to upgrade. Users unable to upgrade should manually apply the code changes in PR #2484.

An issue was discovered in Contiki through 3.0. An Integer Overflow exists in the uIP TCP/IP Stack component when parsing TCP MSS options of IPv4 network packets in uip_process in net/ipv4/uip.c.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. In verions prior to 4.6, an attacker can perform a denial-of-service attack by triggering an infinite loop in the processing of IPv6 neighbor solicitation (NS) messages. This type of attack can effectively shut down the operation of the system because of the cooperative scheduling used for the main parts of Contiki-NG and its communication stack. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. An unaligned memory access can be triggered in the two RPL implementations of the Contiki-NG operating system. The problem can occur when either one of these RPL implementations is enabled and connected to an RPL instance. If an IPv6 packet containing an odd number of padded bytes before the RPL option, it can cause the rpl_ext_header_hbh_update function to read a 16-bit integer from an odd address. The impact of this unaligned read is architecture-dependent, but can potentially cause the system to crash. The problem has not been patched as of release 4.9, but will be included in the next release. One can apply the changes in Contiki-NG pull request #2962 to patch the system or wait for the next release.

An issue was discovered in uIP through 1.0, as used in Contiki and Contiki-NG. Domain name parsing lacks bounds checks, allowing an attacker to corrupt memory with crafted DNS packets.

An issue was discovered in Contiki-NG tinyDTLS through 2018-08-30. One incorrect handshake could complete with different epoch numbers in the packets Client_Hello, Client_key_exchange, and Change_cipher_spec, which may cause denial of service.

An assertion failure discovered in in check_certificate_request() in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers to cause a denial of service.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. Because of insufficient validation of IPv6 neighbor discovery options in Contiki-NG, attackers can send neighbor solicitation packets that trigger an out-of-bounds read. The problem exists in the module os/net/ipv6/uip-nd6.c, where memory read operations from the main packet buffer, <code>uip_buf</code>, are not checked if they go out of bounds. In particular, this problem can occur when attempting to read the 2-byte option header and the Source Link-Layer Address Option (SLLAO). This attack requires ipv6 be enabled for the network. The problem has been patched in the develop branch of Contiki-NG. The upcoming 4.8 release of Contiki-NG will include the patch.Users unable to upgrade may apply the patch in Contiki-NG PR #1654.

An issue was discovered in Contiki-NG through 4.1. There is a stack-based buffer overflow in next_string in os/storage/antelope/aql-lexer.c while parsing AQL (parsing next string).

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to and including 4.8 are vulnerable to an out-of-bounds write that can occur in the BLE-L2CAP module. The Bluetooth Low Energy - Logical Link Control and Adaptation Layer Protocol (BLE-L2CAP) module handles fragmentation of packets up the configured MTU size. When fragments are reassembled, they are stored in a packet buffer of a configurable size, but there is no check to verify that the packet buffer is large enough to hold the reassembled packet. In Contiki-NG's default configuration, it is possible that an out-of-bounds write of up to 1152 bytes occurs. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be fixed by applying the patch in Contiki-NG pull request #2254 prior to the release of version 4.9.

An issue was discovered in Contiki-NG through 4.1. There is a stack-based buffer overflow in parse_relations in os/storage/antelope/aql-parser.c while parsing AQL (storage of relations).

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 are vulnerable to an Out-of-bounds read. While processing the L2CAP protocol, the Bluetooth Low Energy stack of Contiki-NG needs to map an incoming channel ID to its metadata structure. While looking up the corresponding channel structure in get_channel_for_cid (in os/net/mac/ble/ble-l2cap.c), a bounds check is performed on the incoming channel ID, which is meant to ensure that the channel ID does not exceed the maximum number of supported channels.However, an integer truncation issue leads to only the lowest byte of the channel ID to be checked, which leads to an incomplete out-of-bounds check. A crafted channel ID leads to out-of-bounds memory to be read and written with attacker-controlled data. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. As a workaround, Users can apply the patch in Contiki-NG pull request 2081 on GitHub.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. It is possible to cause an out-of-bounds write in versions of Contiki-NG prior to 4.6 when transmitting a 6LoWPAN packet with a chain of extension headers. Unfortunately, the written header is not checked to be within the available space, thereby making it possible to write outside the buffer. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUF_SIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUF_SIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds write exists in the driver for IEEE 802.15.4 radios on nRF platforms in the Contiki-NG operating system. The problem is triggered when parsing radio frames in the `read_frame` function in the `arch/cpu/nrf/net/nrf-ieee-driver-arch.c` module. More specifically, the `read_frame` function performs an incomplete validation of the payload length of the packet, which is a value that can be set by an external party that sends radio packets to a Contiki-NG system. Although the value is validated to be in the range of the MTU length, it is not validated to fit into the given buffer into which the packet will be copied. The problem has been patched in the "develop" branch of Contiki-NG and is expected to be included in subsequent releases. Users are advised to update their develop branch or to update to a subsequent release when available. Users unable to upgrade should consider manually applying the changes in PR #2741.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. Functions parsing the OIDs in SNMP requests lack sufficient allocated target-buffer capacity verification when writing parsed OID values. The function snmp_oid_decode_oid() may overwrite memory areas beyond the provided target buffer, when called from snmp_message_decode() upon an SNMP request reception. Because the content of the write operations is externally provided in the SNMP requests, it enables a remote overwrite of an IoT device's memory regions beyond the allocated buffer. This overflow may allow remote overwrite of stack and statically allocated variables memory regions by sending a crafted SNMP request.

An issue was discovered in Contiki-NG through 4.3 and Contiki through 3.0. An out of bounds write is present in the data section during 6LoWPAN fragment re-assembly in the face of forged fragment offsets in os/net/ipv6/sicslowpan.c.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in the Contiki-NG operating system (file os/net/ipv6/sicslowpan.c) contains an input function that processes incoming packets and copies them into a packet buffer. Because of a missing length check in the input function, it is possible to write outside the packet buffer's boundary. The vulnerability can be exploited by anyone who has the possibility to send 6LoWPAN packets to a Contiki-NG system. In particular, the vulnerability is exposed when sending either of two types of 6LoWPAN packets: an unfragmented packet or the first fragment of a fragmented packet. If the packet is sufficiently large, a subsequent memory copy will cause an out-of-bounds write with data supplied by the attacker.

Memory access out of buffer boundaries issues was discovered in Contiki-NG 4.4 through 4.5, in the SNMP BER encoder/decoder. The length of provided input/output buffers is insufficiently verified during the encoding and decoding of data. This may lead to out-of-bounds buffer read or write access in BER decoding and encoding functions.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. If the number of variables in the request exceeds the allocated buffer, a memory write out of the buffer boundaries occurs. This write operation provides a possibility to overwrite other variables allocated in the .bss section by the application. Because the sender of the frame is in control of the content that will be written beyond the buffer limits, and there is no strict process memory separation, this issue may allow overwriting of sensitive memory areas of an IoT device.

The shader translator implementation in Google Chrome before 17.0.963.46 allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

In Wireshark 2.4.0 to 2.4.5 and 2.2.0 to 2.2.13, the ADB dissector could crash with a heap-based buffer overflow. This was addressed in epan/dissectors/packet-adb.c by checking for a length inconsistency.

Those using HtmlUnit to browse untrusted webpages may be vulnerable to Denial of service attacks (DoS). If HtmlUnit is running on user supplied web pages, an attacker may supply content that causes HtmlUnit to crash by a stack overflow. This effect may support a denial of service attack.This issue affects htmlunit before 2.70.0.

Qt 5.x before 5.15.6 and 6.x through 6.1.2 has an out-of-bounds write in QOutlineMapper::convertPath (called from QRasterPaintEngine::fill and QPaintEngineEx::stroke).

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105 and classified as critical. This issue affects some unknown processing of the file /boafrm/formMapDel of the component HTTP POST Request Handler. The manipulation of the argument devicemac1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

The audioop module in Python 2.7 and 3.2 does not verify the relationships between size arguments and byte string lengths, which allows context-dependent attackers to cause a denial of service (memory corruption and application crash) via crafted arguments, as demonstrated by a call to audioop.reverse with a one-byte string, a different vulnerability than CVE-2010-1634.

TOTOLINK T6 V4.1.9cu.5179_B20201015 was discovered to contain a stack overflow via the url parameter in the function FUN_00418540.

Polipo through 1.1.1, when NDEBUG is used, allows a heap-based buffer overflow during parsing of a Range header. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

LBT T300-T390 v2.2.1.8 were discovered to contain a stack overflow via the ApCliSsid parameter in the generate_conf_router function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

Stack buffer overflow vulnerability in gitea 1.9.0 through 1.13.1 allows remote attackers to cause a denial of service (crash) via vectors related to a file path.

Buffer underflow in the rgbimg module in Python 2.5 allows remote attackers to cause a denial of service (application crash) via a large ZSIZE value in a black-and-white (aka B/W) RGB image that triggers an invalid pointer dereference.

An issue was discovered in Extreme Networks ExtremeWireless WiNG 5.x before 5.8.6.9 and 5.9.x before 5.9.1.3. There is a Remote, Unauthenticated Stack Overflow in the RIM (Radio Interface Module) process running on the WiNG Access Point via crafted packets.

Memory corruption in Intel(R) Baseboard Management Controller firmware may allow an unauthenticated user to potentially enable denial of service via network access.

A Stack-based Buffer Overflow issue was discovered in Emerson Process Management ControlWave Micro Process Automation Controller: ControlWave Micro [ProConOS v.4.01.280] firmware: CWM v.05.78.00 and prior. A stack-based buffer overflow vulnerability caused by sending crafted packets on Port 20547 could force the PLC to change its state into halt mode.

A bug affects the Linux kernel’s ksmbd NTLMv2 authentication and is known to crash the OS immediately in Linux-based systems.

A Stack-based buffer overflow vulnerability in the SonicOS allows a remote unauthenticated attacker to cause Denial of Service (DoS), which could cause an impacted firewall to crash.

A heap corruption in WhatsApp can be caused by a malformed RTP packet being sent after a call is established. The vulnerability can be used to cause denial of service. It affects WhatsApp for Android prior to v2.18.293, WhatsApp for iOS prior to v2.18.93, and WhatsApp for Windows Phone prior to v2.18.172.

A vulnerability was found in TRENDnet TEW-652BRP 3.04B01. It has been declared as critical. This vulnerability affects unknown code of the file cfg_op.ccp of the component Web Service. The manipulation leads to memory corruption. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-219958 is the identifier assigned to this vulnerability.

Stack-based buffer overflow in the evutil_parse_sockaddr_port function in evutil.c in libevent before 2.1.6-beta allows attackers to cause a denial of service (segmentation fault) via vectors involving a long string in brackets in the ip_as_string argument.

The Linux Foundation Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) was discovered to contain a buffer overflow in the decode_esm_message_container function at /nas/ies/EsmMessageContainer.cpp. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted NAS packet.

The Linux Foundation Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) was discovered to contain a stack overflow in the decode_protocol_configuration_options function at /3gpp/3gpp_24.008_sm_ies.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted NAS packet.

Espruino 2v20 (commit fcc9ba4) was discovered to contain a Stack Overflow via the jspeFactorFunctionCall at src/jsparse.c.

A heap-based buffer overflow vulnerability exists in the Programming Software Connection FiBurn functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted network packet can lead to a buffer overflow. An attacker can send an unauthenticated packet to trigger this vulnerability.

add_password in pam_radius_auth.c in pam_radius 1.4.0 does not correctly check the length of the input password, and is vulnerable to a stack-based buffer overflow during memcpy(). An attacker could send a crafted password to an application (loading the pam_radius library) and crash it. Arbitrary code execution might be possible, depending on the application, C library, compiler, and other factors.

A flaw was found in the vhost library in DPDK. Function vhost_user_set_inflight_fd() does not validate `msg->payload.inflight.num_queues`, possibly causing out-of-bounds memory read/write. Any software using DPDK vhost library may crash as a result of this vulnerability.

Stack overflow in custom XML-parser in Gemalto's Sentinel LDK RTE version before 7.65 leads to remote denial of service