programs/pluto/xauth.c in the client in Openswan 2.6.25 through 2.6.28 allows remote authenticated gateways to execute arbitrary commands via shell metacharacters in (1) cisco_dns_info or (2) cisco_domain_info data in a packet, a different vulnerability than CVE-2010-3302.

OS command injection vulnerability in ELECOM wireless LAN access point devices allows an authenticated user to execute an arbitrary OS command by sending a specially crafted request.

A vulnerability was found in OpenNetAdmin 18.1.1. It has been rated as critical. Affected by this issue is some unknown functionality. The manipulation leads to privilege escalation. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

The theme.php file in SDCMS 2.8 has a command execution vulnerability that allows for the execution of system commands

In DrayTek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the rename_table function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPPo function.

IBM Security Verify Directory 10.0.0 through 10.0.3 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doIPSec function.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This issue affects some unknown processing of the file /useratte/resmanage.php. The manipulation of the argument load leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-264533 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

sa-exim 4.2.1 allows attackers to execute arbitrary code if they can write a .cf file or a rule. This occurs because Greylisting.pm relies on eval (rather than direct parsing and/or use of the taint feature). This issue is similar to CVE-2018-11805.

IBM Security Verify Access Appliance 10.0.0 through 10.0.8 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

ASUS RT-AC86U Traffic Analyzer - Apps analysis function has insufficient filtering of special character. A remote attacker with regular user privilege can exploit this vulnerability to perform command injection attack to execute arbitrary commands, disrupt system or terminate services.

Infoblox NIOS through 8.5.1 has a faulty component that accepts malicious input without sanitization, resulting in shell access.

1Panel is an open source Linux server operation and maintenance management panel. An OS command injection vulnerability exists in 1Panel firewall functionality. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. 1Panel firewall functionality `/hosts/firewall/ip` endpoint read user input without validation, the attacker extends the default functionality of the application, which execute system commands. An attacker can execute arbitrary code on the target system, which can lead to a complete compromise of the system. This issue has been addressed in commit `e17b80cff49` which is included in release version `1.4.3`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

This vulnerability exists in ESDS Emagic Data Center Management Suit due to lack of input sanitization in its Ping component. A remote authenticated attacker could exploit this by injecting OS commands on the targeted system. Successful exploitation of this vulnerability could allow the attacker to execute arbitrary code on targeted system.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted http get request parameters.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges may use a specific HTTP POST releated to certificate operations to gain full access to the device.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

netflow_get_stats in functions_netflow.php in Pandora FMS 7.0NG allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ip_src parameter in an index.php?operation/netflow/nf_live_view request. This issue has been fixed in Pandora FMS 7.0 NG 742.

The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier is vulnerable to command injection via the `user-name` URL parameter. An authenticated malicious agent can exploit this vulnerability to execute arbitrary command on the underlying Linux operating system.

When adding a remote backup location, an authenticated user can pass arbitrary OS commands through the username field. The username is passed without sanitization into CMD running as NT/Authority System. An authenticated attacker can leverage this vulnerability to execute arbitrary code with system-level access to the CyberPower PowerPanel Enterprise server.

A vulnerability has been found in Oiwtech OIW-2431APGN-HP 2.5.3-B20131128 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formScript of the component Personal Script Submenu. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Versions 00.07.00 through 00.07.03 of Teltonika’s RUT router firmware contain an operating system (OS) command injection vulnerability in a Lua service. An attacker could exploit a parameter in the vulnerable function that calls a user-provided package name by instead providing a package with a malicious name that contains an OS command injection payload.

Improper neutralization of active check command arguments in Checkmk < 2.1.0p32, < 2.0.0p38, < 2.2.0p4 leads to arbitrary command execution for authenticated users.

NextCloud Cookbook is a recipe library app. Prior to commit a46d9855 on the `master` branch and commit 489bb744 on the `main-0.9.x` branch, the `pull-checks.yml` workflow is vulnerable to command injection attacks because of using an untrusted `github.head_ref` field. The `github.head_ref` value is an attacker-controlled value. Assigning the value to `zzz";echo${IFS}"hello";#` can lead to command injection. Since the permission is not restricted, the attacker has a write-access to the repository. This issue is fixed in commit a46d9855 on the `master` branch and commit 489bb744 on the `main-0.9.x` branch. There is no risk for the user of the app within the NextCloud server. This only affects the main repository and possible forks of it. Those who have forked the NextCloud Cookbook repository should make sure their forks are on the latest version to prevent code injection attacks and similar.

AVideo is an open source video platform. Prior to version 12.4, an OS Command Injection vulnerability in an authenticated endpoint `/plugin/CloneSite/cloneClient.json.php` allows attackers to achieve Remote Code Execution. This issue is fixed in version 12.4.

On certain TOTOLINK Realtek SDK based routers, an authenticated attacker may execute arbitrary OS commands via the sysCmd parameter to the boafrm/formSysCmd URI, even if the GUI (syscmd.htm) is not available. This allows for full control over the device's internals. This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, N100RE through 3.4.0, and N302RE 2.0.2.

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the sys_smb_pwdmod function.

Command Injection in minPlayCommand.php in Centreon (19.04.4 and below) allows an attacker to achieve command injection via a plugin test.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

A component for parsing OXMF templates could be abused to execute arbitrary system commands that would be executed as the non-privileged runtime user. Users and attackers could run system commands with limited privilege to gain unauthorized access to confidential information and potentially violate integrity by modifying resources. The template engine has been reconfigured to deny execution of harmful commands on a system level. No publicly available exploits are known.

An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

pymedusa is an automatic video library manager for TV Shows. In versions prior 1.0.12 an attacker with access to the web interface can update the git executable path in /config/general/ > advanced settings with arbitrary OS commands. An attacker may exploit this vulnerability to take execute arbitrary OS commands as the user running the pymedusa program. Users are advised to upgrade. There are no known workarounds for this vulnerability.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

OS command injection vulnerability in the download page of SolarView Compact SV-CPT-MC310 versions prior to Ver.8.10 and SV-CPT-MC310F versions prior to Ver.8.10 allows a remote authenticated attacker to execute an arbitrary OS command.

An OS command injection vulnerability exists in the admin.cgi USSD_send functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A vulnerability was found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. It has been rated as critical. Affected by this issue is the function setWiFiExtenderConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument apcliKey/key leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

OS command injection vulnerability in CONPROSYS IoT Gateway products allows a remote authenticated attacker who can access Network Maintenance page to execute arbitrary OS commands with a root privilege. The affected products and versions are as follows: M2M Gateway with the firmware Ver.3.7.10 and earlier (CPS-MG341-ADSC1-111, CPS-MG341-ADSC1-931, CPS-MG341G-ADSC1-111, CPS-MG341G-ADSC1-930, and CPS-MG341G5-ADSC1-931), M2M Controller Integrated Type with firmware Ver.3.7.6 and earlier versions (CPS-MC341-ADSC1-111, CPS-MC341-ADSC1-931, CPS-MC341-ADSC2-111, CPS-MC341G-ADSC1-110, CPS-MC341Q-ADSC1-111, CPS-MC341-DS1-111, CPS-MC341-DS11-111, CPS-MC341-DS2-911, and CPS-MC341-A1-111), and M2M Controller Configurable Type with firmware Ver.3.8.8 and earlier versions (CPS-MCS341-DS1-111, CPS-MCS341-DS1-131, CPS-MCS341G-DS1-130, CPS-MCS341G5-DS1-130, and CPS-MCS341Q-DS1-131).

SeowonIntech SWC 5100W WIMAX Bootloader 1.18.19.0, HW 0.0.7.0, and FW 1.11.0.1, 1.9.9.4 are vulnerable to OS Command Injection. which allows attackers to take over the system with root privilege by abusing doSystem() function.

A vulnerability classified as critical has been found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the web-based management interface of the Wireless LAN Controller feature of Cisco IOS XE Software could allow an authenticated, remote attacker with a lobby ambassador user account to perform a command injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with privilege level 15. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a lobby ambassador account. This account is not configured by default.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 13 of 46).

ZoneMinder is a free, open source Closed-circuit television software application for Linux which supports IP, USB and Analog cameras. Versions prior to 1.36.33 and 1.37.33 contain an OS Command Injection via daemonControl() in (/web/api/app/Controller/HostController.php). Any authenticated user can construct an api command to execute any shell command as the web user. This issue is patched in versions 1.36.33 and 1.37.33.

The Xiaomi router AX9000 has a post-authentication command injection vulnerability. This vulnerability is caused by the lack of input filtering, allowing an attacker to exploit it to obtain root access to the device.

An issue was discovered in rConfig 3.9.3. A remote authenticated user can directly execute system commands by sending a GET request to ajaxArchiveFiles.php because the path parameter is passed to the exec function without filtering, which can lead to command execution.

IBM Security Guardium Key Lifecycle Manager 3.0, 3.0.1, 4.0, 4.1, and 4.1.1 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 247632.

A vulnerability, which was classified as critical, was found in Tenda AC7 1200M 15.03.06.44. Affected is the function TendaTelnet of the file /goform/telnet. The manipulation of the argument lan_ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

In Nagios XI 5.6.9, an authenticated user is able to execute arbitrary OS commands via shell metacharacters in the id parameter to schedulereport.php, in the context of the web-server user account.

A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.