A vulnerability in Kaiten version 57.131.12 and earlier allows attackers to bypass the PIN code authentication mechanism. The application requires users to input a 6-digit PIN code sent to their email for authorization after entering their login credentials. However, the request limiting mechanism can be easily bypassed, enabling attackers to perform a brute force attack to guess the correct PIN and gain unauthorized access to the application.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a remote code execution (RCE) vulnerability.

xrdp is an open source RDP server. xrdp versions prior to 0.10.0 have a vulnerability that allows attackers to make an infinite number of login attempts. The number of max login attempts is supposed to be limited by a configuration parameter `MaxLoginRetry` in `/etc/xrdp/sesman.ini`. However, this mechanism was not effectively working. As a result, xrdp allows an infinite number of login attempts.

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

YMS VIS Pro is an information system for veterinary and food administration, veterinarians and farm. Due to a combination of improper method for system credentials generation and weak password policy, passwords can be easily guessed and enumerated through brute force attacks. Successful attacks can lead to unauthorised access and execution of operations based on assigned user permissions. This vulnerability affects VIS Pro in versions <= 3.3.0.6. This vulnerability has been mitigated by changes in authentication mechanisms and implementation of additional authentication layer and strong password policies.

AutoPi Wi-Fi/NB and 4G/LTE devices before 2019-10-15 allows an attacker to perform a brute-force attack or dictionary attack to gain access to the WiFi network, which provides root access to the device. The default WiFi password and WiFi SSID are derived from the same hash function output (input is only 8 characters), which allows an attacker to deduce the WiFi password from the WiFi SSID.

Improper Restriction of Excessive Authentication Attempts in GitHub repository kareadita/kavita prior to 0.6.0.3.

An issue in GX Group GPON ONT Titanium 2122A T2122-V1.26EXL allows attackers to escalate privileges via a brute force attack at the login page.

An improper restriction of excessive authentication attempts [CWE-307] in FortiClientEMS version 7.2.0 through 7.2.4 and before 7.0.10 allows an unauthenticated attacker to try a brute force attack against the FortiClientEMS console via crafted HTTP or HTTPS requests.

Dell RecoverPoint for Virtual Machines 5.3.x, 6.0.SP1 contains a brute force/dictionary attack vulnerability. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to launch a brute force attack or a dictionary attack against the RecoverPoint login form. This allows attackers to brute-force the password of valid users in an automated manner.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Prior to versions 2.8.13, 2.9.9, and 2.10.4, an attacker can exploit a chain of vulnerabilities, including a Denial of Service (DoS) flaw and in-memory data storage weakness, to effectively bypass the application's brute force login protection. This is a critical security vulnerability that allows attackers to bypass the brute force login protection mechanism. Not only can they crash the service affecting all users, but they can also make unlimited login attempts, increasing the risk of account compromise. Versions 2.8.13, 2.9.9, and 2.10.4 contain a patch for this issue.

CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could cause account takeover and unauthorized access to the system when an attacker conducts brute-force attacks against the login form.

Dell RecoverPoint for Virtual Machines 6.0.x contains a vulnerability. An improper Restriction of Excessive Authentication vulnerability where a Network attacker could potentially exploit this vulnerability, leading to a brute force attack or a dictionary attack against the RecoverPoint login form and a complete system compromise. This allows attackers to brute-force the password of valid users in an automated manner.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.8.

Impact varies for each individual vulnerability in the application. For generation of accounts, it may be possible, depending on the amount of system resources available, to create a DoS event in the server. These accounts still need to be activated; however, it is possible to identify the output Status Code to separate accounts that are generated and waiting for email verification. \n\nFor the sign in directories, it is possible to brute force login attempts to either login portal, which could lead to account compromise.

BF-OS version 3.x up to and including 3.83 do not enforce strong passwords which may allow a remote attacker to brute-force the device password.

Renato v0.17.0 employs weak password complexity requirements, allowing attackers to crack user passwords via brute-force attacks.

An improper restriction of excessive authentication attempts vulnerability [CWE-307] in FortiTester Telnet port 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated attacker to guess the credentials of an admin user via a brute force attack.

BookWyrm is a social network for tracking reading. Versions prior to 0.4.5 were found to lack rate limiting on authentication views which allows brute-force attacks. This issue has been patched in version 0.4.5. Admins with existing instances will need to update their `nginx.conf` file that was created when the instance was set up. Users are advised advised to upgrade. Users unable to upgrade may update their nginx.conf files with the changes manually.

Zammad 5.2.0 is vulnerable to privilege escalation. Zammad has a prevention against brute-force attacks trying to guess login credentials. After a configurable amount of attempts, users are invalidated and logins prevented. An attacker might work around this prevention, enabling them to send more than the configured amount of requests before the user invalidation takes place.

IBM Robotic Process Automation 21.0.0, 21.0.1, and 21.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 230634.

This vulnerability exists in the Wave 2.0 due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack against legitimate user OTP, MPIN or password, which could lead to gain unauthorized access and compromise other user accounts.

An issue was discovered in Infiray IRAY-A8Z3 1.0.957. There is a blank root password for TELNET by default.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the shareinfo endpoint. This may have allowed an attacker to enumerate potentially valid share tokens. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

Improper restriction of excessive authentication attempts vulnerability in QSAN Storage Manager, XEVO, SANOS allows remote attackers to discover users’ credentials and obtain access via a brute force attack. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

In Eclipse GlassFish version 7.0.16 or earlier it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts.

This vulnerability exists in Reedos aiM-Star version 2.0.1 due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack against legitimate user passwords, which could lead to gain unauthorized access and compromise other user accounts.

EyesOfNetwork 5.3-10 uses an integer of between 8 and 10 digits for the session ID, which might be leveraged for brute-force authentication bypass (such as in CVE-2021-27513 exploitation).

A weak password requirement vulnerability exists in the Create New User function of MintHCM RELEASE 3.0.8, which could lead an attacker to easier password brute-forcing.

IBM Guardium Data Encryption (GDE) 4.0.0.4 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 196217.

IBM Cognos Analytics 11.1.7 and 11.2.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196339.

Revive Adserver before 3.2.3 suffers from Improper Restriction of Excessive Authentication Attempts. The login page of Revive Adserver is vulnerable to password-guessing attacks. An account lockdown feature was considered, but rejected to avoid introducing service disruptions to regular users during such attacks. A random delay has instead been introduced as a countermeasure in case of password failures, along with a system to discourage parallel brute forcing. These systems will effectively allow the valid users to log in to the adserver, even while an attack is in progress.

IBM Security Guardium 11.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 174857.

In Solstice Pod before 3.3.0 (or Open4.3), the screen key can be enumerated using brute-force attacks via the /lookin/info Solstice Open Control API because there are only 1.7 million possibilities.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could cause brute force attacks to take over the admin account when the product does not implement a rate limit mechanism on the admin authentication form. Affected Products: Conext™ ComBox (All Versions)