RIOT-OS 2020.01 contains a buffer overflow vulnerability in /sys/net/gnrc/routing/rpl/gnrc_rpl_control_messages.c.

RIOT-OS 2021.01 contains a buffer overflow vulnerability in sys/net/gnrc/routing/rpl/gnrc_rpl_validation.c through the gnrc_rpl_validation_options() function.

RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. The size check in the `gcoap_dns_server_proxy_get()` function contains a small typo that may lead to a buffer overflow in the subsequent `strcpy()`. In detail, the length of the `_uri` string is checked instead of the length of the `_proxy` string. The `_gcoap_forward_proxy_copy_options()` function does not implement an explicit size check before copying data to the `cep->req_etag` buffer that is `COAP_ETAG_LENGTH_MAX` bytes long. If an attacker can craft input so that `optlen` becomes larger than `COAP_ETAG_LENGTH_MAX`, they can cause a buffer overflow. If the input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerabilities could range from denial of service to arbitrary code execution. This issue has yet to be patched. Users are advised to add manual bounds checking.

RIOT OS version 2020.01.1 is vulnerable to integer wrap-around in its implementation of calloc function, which can lead to arbitrary memory allocation, resulting in unexpected behavior such as a crash or a remote code injection/execution.

RIOT 2020.04 has a buffer overflow in the base64 decoder. The decoding function base64_decode() uses an output buffer estimation function to compute the required buffer capacity and validate against the provided buffer size. The base64_estimate_decode_size() function calculates the expected decoded size with an arithmetic round-off error and does not take into account possible padding bytes. Due to this underestimation, it may be possible to craft base64 input that causes a buffer overflow.

RIOT-OS, an operating system for Internet of Things (IoT) devices, contains a network stack with the ability to process 6LoWPAN frames. In version 2023.01 and prior, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. This issue is fixed in pull request 19680. As a workaround, disable support for fragmented IP datagrams.

RIOT RIOT-OS version after commit 7af03ab624db0412c727eed9ab7630a5282e2fd3 contains a Buffer Overflow vulnerability in sock_dns, an implementation of the DNS protocol utilizing the RIOT sock API that can result in Remote code executing. This attack appears to be exploitable via network connectivity.

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. Version 2022.10 fixes this issue. As a workaround, disable support for fragmented IP datagrams or apply the patches manually.

RIOT-OS, an operating system that supports Internet of Things devices, contains a network stack with the ability to process 6LoWPAN frames. Prior to version 2022.10, an attacker can send a crafted frame to the device resulting in a type confusion between IPv6 extension headers and a UDP header. This occurs while encoding a 6LoWPAN IPHC header. The type confusion manifests in an out of bounds write in the packet buffer. The overflow can be used to corrupt other packets and the allocator metadata. Corrupting a pointer will easily lead to denial of service. While carefully manipulating the allocator metadata gives an attacker the possibility to write data to arbitrary locations and thus execute arbitrary code. Version 2022.10 fixes this issue. As a workaround, apply the patches manually.

RIOT-OS 2021.01 before commit bc59d60be60dfc0a05def57d74985371e4f22d79 contains a buffer overflow which could allow attackers to obtain sensitive information.

RIOT-OS 2021.01 before commit 07f1254d8537497552e7dce80364aaead9266bbe contains a buffer overflow which could allow attackers to obtain sensitive information.

RIOT-OS 2021.01 before commit 609c9ada34da5546cffb632a98b7ba157c112658 contains a buffer overflow that could allow attackers to obtain sensitive information.

RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. Most codebases define assertion macros which compile to a no-op on non-debug builds. If assertions are the only line of defense against untrusted input, the software may be exposed to attacks that leverage the lack of proper input checks. In detail, in the `nimble_scanlist_update()` function below, `len` is checked in an assertion and subsequently used in a call to `memcpy()`. If an attacker is able to provide a larger `len` value while assertions are compiled-out, they can write past the end of the fixed-length `e->ad` buffer. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has not yet been patched. Users are advised to add manual `len` checking.

RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. The `_on_rd_init()` function does not implement a size check before copying data to the `_result_buf` static buffer. If an attacker can craft a long enough payload, they could cause a buffer overflow. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has yet to be patched. Users are advised to add manual bounds checking.

RIOT-OS 2021.01 before commit 44741ff99f7a71df45420635b238b9c22093647a contains a buffer overflow which could allow attackers to obtain sensitive information.

RIOT-OS 2021.01 before commit 85da504d2dc30188b89f44c3276fc5a25b31251f contains a buffer overflow which could allow attackers to obtain sensitive information.

Shenzhen Libituo Technology Co., Ltd LBT-T300-mini v1.2.9 was discovered to contain a buffer overflow via the vpn_client_ip parameter at /apply.cgi.

Buffer Overflow vulnerability in radarorg radare2 v.5.8.8 allows an attacker to execute arbitrary code via the name, type, or group fields.

Buffer Overflow vulnerability in TOTOLink X5000R V9.1.0u.6118-B20201102 and A7000R V9.1.0u.6115-B20201022, allow remote attackers to execute arbitrary code and cause a denial of service (DoS) via the IP field.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Multiple buffer overflows in STLport before 5.0.3 allow remote attackers to execute arbitrary code via unspecified vectors relating to (1) "print floats" and (2) a missing null termination in the "rope constructor."

A vulnerability was identified in INSTAR 2K+ and 4K 3.11.1 Build 1124. This affects the function base64_decode of the component fcgi_server. The manipulation of the argument Authorization leads to buffer overflow. It is possible to initiate the attack remotely.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflow in the gdImageStringFTEx function in gdft.c in GD Graphics Library 2.0.33 and earlier allows remote attackers to cause a denial of service (application crash) and possibly execute arbitrary code via a crafted string with a JIS encoded font.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A buffer-overread issue was discovered in StringIO 3.0.1, as distributed in Ruby 3.0.x through 3.0.6 and 3.1.x through 3.1.4. The ungetbyte and ungetc methods on a StringIO can read past the end of a string, and a subsequent call to StringIO.gets may return the memory value. 3.0.3 is the main fixed version; however, for Ruby 3.0 users, a fixed version is stringio 3.0.1.1, and for Ruby 3.1 users, a fixed version is stringio 3.0.1.2.

A buffer overflow vulnerability in the URL parser of the zhttpd web server in Zyxel VMG8825-T50K firmware versions prior to V5.50(ABOM.5)C0 could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and potentially execute arbitrary code by sending a specially crafted HTTP request.

A vulnerability was found in FreeFloat FTP Server 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component XMKD Command Handler. The manipulation leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on Samsung mobile devices with M(6.0) (Exynos or MediaTek chipsets) software. There is a buffer overflow in a Trustlet that can cause memory corruption. The Samsung ID is SVE-2018-11599 (July 2018).

An issue was discovered on Samsung mobile devices with software through 2017-11-03 (S.LSI modem chipsets). The Exynos modem chipset has a baseband buffer overflow. The Samsung ID is SVE-2017-10745 (January 2018).

A vulnerability was found in FreeFloat FTP Server 1.0 and classified as critical. This issue affects some unknown processing of the component RESTART Command Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda AC7 15.03.06.44 and classified as critical. This issue affects the function formSetPPTPUserList of the file /goform/setPptpUserList. The manipulation of the argument list leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in UTT 进取 750W up to 5.0. It has been classified as critical. This affects the function strcpy of the file /goform/setSysAdm of the component API. The manipulation of the argument passwd1 leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, EX2700 before 1.0.1.32, EX6100v2 before 1.0.1.70, EX6150v2 before 1.0.1.70, EX6200v2 before 1.0.1.62, EX6400 before 1.0.1.78, EX7300 before 1.0.1.62, EX8000 before 1.0.0.114, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, R7800 before 1.0.2.40, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WN2000RPTv3 before 1.0.1.26, WN3000RPv2 before 1.0.0.56, WN3000RPv3 before 1.0.2.66, WN3100RPv2 before 1.0.0.56, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, and WNR2000v5 before 1.0.0.64.

A vulnerability was found in FreeFloat FTP Server 1.0. It has been classified as critical. Affected is an unknown function of the component XCWD Command Handler. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in FreeFloat FTP Server 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the component REIN Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.0) software. The sem Trustlet has a buffer overflow that leads to arbitrary TEE code execution. The Samsung IDs are SVE-2018-13230, SVE-2018-13231, SVE-2018-13232, SVE-2018-13233 (December 2018).

A vulnerability was found in Modbus Tools Modbus Poll up to 9.10.0 and classified as critical. Affected by this issue is some unknown functionality of the file mbpoll.exe of the component mbp File Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-217022 is the identifier assigned to this vulnerability.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.X) (Exynos chipsets) software. There is a Buffer overflow in the esecomm Trustlet, leading to arbitrary code execution. The Samsung ID is SVE-2018-12852 (October 2018).

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects RAX40 before 1.0.2.60, RAX35 before 1.0.2.60, R6400v2 before 1.0.4.122, R6700v3 before 1.0.4.122, R6900P before 1.3.3.152, R7000P before 1.3.3.152, R7000 before 1.0.11.136, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

uev (aka libuev) before 2.4.1 has a buffer overflow in epoll_wait if maxevents is a large number.

A vulnerability, which was classified as critical, has been found in FreeFloat FTP Server 1.0. Affected by this issue is some unknown functionality of the component PASSIVE Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

A vulnerability, which was classified as critical, has been found in FreeFloat FTP Server 1.0. This issue affects some unknown processing of the component CDUP Command Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in FreeFloat FTP Server 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the component PASV Command Handler. The manipulation leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the indexSet parameter in the formQOSRuleDel function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain multiple buffer overflows via the pEnable, pLevel, and pModule parameters in the formSetDebugCfg function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the indexSet parameter in the formIPMacBindDel function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the sPortMapIndex parameter in the formDelPortMapping function.