Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects R6220 before V1.1.0.50, R7800 before V1.0.2.36, WNDR3400v3 before 1.0.1.14, and WNDR3700v5 before V1.1.0.48.

A vulnerability was identified in D-Link DIR-825 3.00b32. This affects the function NMBD_process of the file sserver.c of the component nmbd. Such manipulation leads to buffer overflow. The attack can only be initiated within the local network. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

Huawei smart phones with earlier versions than ELLE-AL00B 9.1.0.222(C00E220R2P1) have a buffer overflow vulnerability. An attacker may intercept and tamper with the packet in the local area network (LAN) to exploit this vulnerability. Successful exploitation may cause the affected phone abnormal.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects R6250 before 1.0.4.12, R6300v2 before 1.0.4.12, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R7000 before 1.0.9.4, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.74.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects R6400 before 1.0.1.24, R6400v2 before 1.0.2.32, R6700 before 1.0.1.22, R6900 before 1.0.1.22, R7000 before 1.0.9.4, R7000P before 1.0.0.56, R6900P before 1.0.0.56, R7100LG before 1.0.0.32, R7300 before 1.0.0.54, R7900 before 1.0.1.18, R8300 before 1.0.2.104, and R8500 before 1.0.2.104.

In wlan AP driver, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00415809; Issue ID: MSV-3405.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Ariel Harush and Roy Hodir from OTORIO have found a flaw in the AXIS A1001 when communicating over OSDP. A heap-based buffer overflow was found in the pacsiod process which is handling the OSDP communication allowing to write outside of the allocated buffer. By appending invalid data to an OSDP message it was possible to write data beyond the heap allocated buffer. The data written outside the buffer could be used to execute arbitrary code.  lease refer to the Axis security advisory for more information, mitigation and affected products and software versions.

Heap out-of-bound write vulnerability in Exynos baseband prior to SMR Jun-2023 Release 1 allows remote attacker to execute arbitrary code.

usb device bluetooth class includes a buffer overflow related to implementation of net_buf_add_mem.

The DEF CON 27 badge allows remote attackers to exploit a buffer overflow by sending an oversized packet via the NFMI (Near Field Magnetic Induction) protocol.

A Buffer Overflow vulnerability in the RSTP server component of Eufy Indoor 2K Indoor Camera allows a local attacker to achieve remote code execution. This issue affects: Eufy Indoor 2K Indoor Camera 2.0.9.3 version and prior versions.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business 220 Series Smart Switches. An unauthenticated, adjacent attacker could perform the following: Execute code on the affected device or cause it to reload unexpectedly Cause LLDP database corruption on the affected device For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released firmware updates that address these vulnerabilities.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business 220 Series Smart Switches. An unauthenticated, adjacent attacker could perform the following: Execute code on the affected device or cause it to reload unexpectedly Cause LLDP database corruption on the affected device For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released firmware updates that address these vulnerabilities.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12066.

A vulnerability has been found in SourceCodester Telecom Billing Management System 1.0 and classified as critical. This vulnerability affects the function login. The manipulation of the argument uname leads to buffer overflow. The exploit has been disclosed to the public and may be used.

u'Buffer overflow while processing PDU packet in bluetooth due to lack of check of buffer length before copying into it.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, QCA6390, QCN7605, QCN7606, SA415M, SA515M, SA6155P, SA8155P, SC8180X, SDX55

Tenda AC18 V15.03.05.19 was discovered to contain a stack overflow via the funcpara1 parameter in the formSetCfm function.

Buffer Overflow vulnerability in D-Link DSR-150, DSR-150N, DSR-250, DSR-250N, DSR-500N, DSR-1000N from 3.13 to 3.17B901C allows unauthenticated users to execute remote code execution.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.40, R6080 before 1.0.0.40, R6050 before 1.0.1.18, R6120 before 1.0.0.48, R6220 before 1.1.0.86, R6260 before 1.1.0.64, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, and WNR2020 before 1.1.0.62.

Actiontec WCB6200Q uh_tcp_recv_header Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21414.

Actiontec WCB6200Q uh_tcp_recv_content Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21410.

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could result in remote code execution or the crash of HTTPs stack which is used for the device Web HMI. Affected Products: Easergy P5 (V01.401.102 and prior)

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SOAP requests. When parsing the SOAPAction header, the process does not properly validate the length of user-supplied data prior to copying it to a buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15692.

The Bluetooth Low Energy implementation on NXP SDK through 2.2.1 for KW41Z devices does not properly restrict the Link Layer payload length, allowing attackers in radio range to cause a buffer overflow via a crafted packet.

Tenda AC6 v2.0 V15.03.06.50 was discovered to contain a buffer overflow in the function 'formSetPPTPServer'.

rtl_p2p_noa_ie in drivers/net/wireless/realtek/rtlwifi/ps.c in the Linux kernel through 5.3.6 lacks a certain upper-bound check, leading to a buffer overflow.

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could lead to a buffer overflow causing program crashes and arbitrary code execution when specially crafted packets are sent to the device over the network. Protection functions and tripping function via GOOSE can be impacted. Affected Product: Easergy P5 (All firmware versions prior to V01.401.101)

Edimax AC1200 Wi-Fi 5 Dual-Band Router BR-6476AC 1.06 is vulnerable to Buffer Overflow via /goform/fromSetLanDhcpsClientbinding.

Wind River VxWorks 6.6 through 6.9 has a Buffer Overflow in the DHCP client component. There is an IPNET security vulnerability: Heap overflow in DHCP Offer/ACK parsing inside ipdhcpc.

Edimax AC1200 Wi-Fi 5 Dual-Band Router BR-6476AC 1.06 is vulnerable to Buffer Overflow via /goform/getWifiBasic.

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) (Broadcom Bluetooth chipsets) software. The Bluetooth UART driver has a buffer overflow. The Samsung ID is SVE-2020-18731 (January 2021).

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the HNAP_AUTH HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12065.

A vulnerability classified as critical has been found in Shanghai Sunfull Automation BACnet Server HMI1002-ARM 2.0.4. This affects an unknown part of the component Message Handler. The manipulation leads to buffer overflow. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263115. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Netgear RAX43 version 1.0.3.96 contains a buffer overrun vulnerability. The URL parsing functionality in the cgi-bin endpoint of the router containers a buffer overrun issue that can redirection control flow of the applicaiton.

In multiple functions of gl_proc.c, there is a buffer overwrite due to a missing bounds check. This could lead to escalation of privileges in the kernel.

Buffer overflow in the BMC firmware for Intel(R) Server BoardM10JNP2SB before version EFI BIOS 7215, BMC 8100.01.08 may allow an unauthenticated user to potentially enable an escalation of privilege via adjacent access.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D6100 before 1.0.0.56, and R6100 before 1.0.1.20.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500v2 before 1.0.3.24, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, and WN3100RPv2 before 1.0.0.56.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D6100 before 1.0.0.56, D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D6100 before 1.0.0.56, D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.30, EX2700 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, WN3100RPv2 before 1.0.0.56, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D6100 before 1.0.0.56, D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D7800 before 1.0.1.30, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.24, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.96, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.67, D6000 before 1.0.0.67, D6100 before 1.0.0.56, EX2700 before 1.0.1.28, R7500v2 before 1.0.3.24, R9000 before 1.0.2.52, WN2000RPTv3 before 1.0.1.20, WN3000RPv3 before 1.0.2.50, and WN3100RPv2 before 1.0.0.56.

A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the pppd binary.