Improper authorization vulnerability in QSAN Storage Manager allows remote privileged users to bypass the access control and execute arbitrary commands. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

The same hard-coded password in QSAN Storage Manager's in the firmware allows remote attackers to access the control interface with the administrator’s credential, entering the hard-coded password of the debug mode to execute the restricted system instructions. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

The QSAN SANOS setting page does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

QSAN SANOS factory reset function does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

OS command injection vulnerability in Array function in QSAN XEVO allows remote unauthenticated attackers to execute arbitrary commands via status parameter. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

QuickInstall in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

QsanTorture in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

OS command injection vulnerability in Init function in QSAN XEVO allows remote attackers to execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.

On D-Link DCS-5009 devices with firmware 1.08.11 and earlier, DCS-5010 devices with firmware 1.14.09 and earlier, and DCS-5020L devices with firmware before 1.15.01, command injection in alphapd (binary responsible for running the camera's web server) allows remote authenticated attackers to execute code through sanitized /setSystemAdmin user input in the AdminID field being passed directly to a call to system.

A Remote Code Execution issue in the DNS Query Web UI in Lifesize Icon LS_RM3_3.7.0 (2421) allows remote authenticated attackers to execute arbitrary commands via a crafted DNS Query address field in a JSON API request.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 are vulnerable to an attacker using a traceroute tool to inject commands into the device. This may allow the attacker to remotely run commands on behalf of the device.

The EyesOfNetwork web interface (aka eonweb) 5.1-0 allows remote command execution via shell metacharacters in a hosts_cacti array parameter to module/admin_device/index.php.

Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 are vulnerable to an attacker using a ping tool to inject commands into the device. This may allow the attacker to remotely run commands on behalf of the device.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\snmpwalk.php does not properly restrict popen calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in a parameter.

T&W WIFI Repeater BE126 allows remote authenticated users to execute arbitrary code via shell metacharacters in the user parameter to cgi-bin/webupg.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\interface.php does not properly restrict exec calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in the host_list parameter to module/tool_all/select_tool.php.

A flaw has been found in ArtMin96 yii2-mcp-server 1.0.2. This impacts the function yii_command_help/yii_execute_command of the file src/index.ts of the component MCP Interface. Executing a manipulation can lead to os command injection. The attack can be executed remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.

Improper neutralization of inputs used in an OS command in the FSx Windows File Server volume mounting component in Amazon ECS Agent on Windows before version 1.103.0 might allow a remote authenticated threat actor to execute shell commands with SYSTEM privileges on the underlying host via a specially crafted username field in an ECS task definition. This issue requires permissions to register ECS task definitions or write to the Secrets Manager or SSM Parameter Store credentials used by the FSx volume configuration. To remediate this issue, users should upgrade to version 1.103.0.

A flaw has been found in TRENDnet TEW-821DAP up to 1.12B01. The impacted element is the function tools_diagnostic of the file /tmp/diagnostic of the component Firmware Udpate. This manipulation causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor explains: "That firmware version will only work on our hardware version v1.xR. We have already EOL that product 8 years ago and are no longer selling". This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in 1Panel-dev MaxKB up to 2.6.1. The affected element is the function execute of the file apps/application/flow/step_node/mcp_node/impl/base_mcp_node.py of the component Model Context Protocol Node. Performing a manipulation results in os command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.

All versions up to UKBB_WF820+_1.0.0B06 of ZTE WF820+ LTE Outdoor CPE product are impacted by command injection vulnerability. Due to inadequate parameter verification, unauthorized users can take advantage of this vulnerability to control the user terminal system.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

Command injection vulnerability in Trend Micro Smart Protection Server (Standalone) 3.1 and 3.2 server administration UI allows attackers with authenticated access to execute arbitrary code on vulnerable installations.

A security flaw has been discovered in r-huijts mcp-server-rijksmuseum up to 1.0.4. Affected is the function open_image_in_browser of the file src/index.ts of the component MCP Interface. Performing a manipulation of the argument imageUrl results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability classified as critical was found in Tenda AC1206 up to 15.03.06.23. This vulnerability affects the function ate_iwpriv_set/ate_ifconfig_set of the file /goform/ate. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability was found in the PPTP VPN Clients on the ADM. The vulnerability allows an administrative user to break out of the restricted web environment and execute arbitrary code on the underlying operating system. This occurs due to insufficient validation of user-supplied input before it is passed to a system shell. Successful exploitation allows an attacker to achieve Remote Code Execution (RCE) and fully compromise the system. Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RR42 as well as from ADM 5.0.0 through ADM 5.1.2.REO1.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to authenticated command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/device_Form?script/.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended.

A vulnerability was determined in danielmiessler Personal_AI_Infrastructure up to 2.3.0. Affected is an unknown function of the file Skills/Parser/Tools/parse_url.ts. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This patch is called 14322e87e58bf585cf3c7b9295578a6eb7dc4945. It is advisable to implement a patch to correct this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A weakness has been identified in privsim mcp-test-runner 0.2.0. Impacted is the function child_process.spawn of the file src/index.ts of the component MCP Interface. Executing a manipulation of the argument command can lead to os command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

LibreNMS versions before 26.3.0 are affected by an authenticated remote code execution vulnerability by abusing the Binary Locations config and the Netcommand feature. Successful exploitation requires administrative privileges. Exploitation could result in compromise of the underlying web server.

An exploitable OS Command Injection vulnerability exists in the web application 'ping' functionality of Moxa AWK-3131A Wireless Access Points running firmware 1.1. Specially crafted web form input can cause an OS Command Injection resulting in complete compromise of the vulnerable device. An attacker can exploit this vulnerability remotely.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG2600HP2, WG2600HP, WG2200HP, WG1800HP2, WG1800HP, WG1400HP, WG600HP, WG300HP, WF300HP, WR9500N, WR9300N, WR8750N, WR8700N, WR8600N, WR8370N, WR8175N and WR8170N all versions allows a attacker to execute an arbitrary OS command with the root privilege, after obtaining a high privilege exploiting CVE-2023-3330 and CVE-2023-3331 vulnerabilities.

HCL DevOps Deploy / HCL Launch could allow a remote privileged authenticated attacker to execute arbitrary commands on the system by sending specially crafted input containing special elements.

A vulnerability was detected in pskill9 website-downloader up to 0.1.0. This affects the function download_website of the file src/index.ts of the component MCP Interface. Performing a manipulation of the argument outputPath results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A command injection vulnerability was reported in the Integrated Management Module (IMM) of legacy IBM System x 3550 M3 and IBM System x 3650 M3 servers that could allow the execution of operating system commands over an authenticated SSH or Telnet session.

An improper neutralization of special elements vulnerability was identified in GitHub Enterprise Server that allowed an authenticated Management Console administrator to execute arbitrary OS commands via shell metacharacter injection in proxy configuration fields such as http_proxy. Exploitation of this vulnerability required access to the GitHub Enterprise Server instance and administrator privileges to the Management Console. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.20.1, 3.19.5, 3.18.8, 3.17.14, 3.16.17, 3.15.21, 3.14.26. This vulnerability was reported via the GitHub Bug Bounty program.

A vulnerability has been found in Trendnet TEW-657BRM 1.00.1. Affected by this issue is the function vpn_drop of the file /setup.cgi. The manipulation of the argument policy_name leads to os command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in Trendnet TEW-657BRM 1.00.1. This affects the function add_wps_client of the file /setup.cgi. This manipulation of the argument wl_enrolee_pin causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-882 1.01B02. Impacted is the function sprintf of the file prog.cgi of the component HNAP1 SetNetworkSettings Handler. The manipulation of the argument IPAddress results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in Trendnet TEW-657BRM 1.00.1. Affected is the function ping_test of the file /setup.cgi. Performing a manipulation of the argument c4_IPAddr results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in Totolink A3300R 17.0.0cu.557_b20221024. This affects the function setLanCfg of the file /cgi-bin/cstecgi.cgi of the component Parameter Handler. The manipulation of the argument lanIp leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.