An unauthenticated remote attacker can cause a DoS in the controller due to uncontrolled resource consumption.

On WAGO PFC200 devices in different firmware versions with special crafted packets an attacker with network access to the device could cause a denial of service for the login service of the runtime.

ABB, Phoenix Contact, Schneider Electric, Siemens, WAGO - Programmable Logic Controllers, multiple versions. Researchers have found some controllers are susceptible to a denial-of-service attack due to a flood of network packets.

Uncontrolled resource consumption in Series WAGO 750-3x/-8x products may allow an unauthenticated remote attacker to DoS the MODBUS server with specially crafted packets.

Missing Release of Resource after Effective Lifetime vulnerability in OpenSSL implementation of WAGO 750-831/xxx-xxx, 750-880/xxx-xxx, 750-881, 750-889 in versions FW4 up to FW15 allows an unauthenticated attacker to cause DoS on the device.

In CODESYS V2 Runtime Toolkit 32 Bit full and PLCWinNT prior to versions V2.4.7.56 unauthenticated crafted invalid requests may result in several denial-of-service conditions. Running PLC programs may be stopped, memory may be leaked, or further communication clients may be blocked from accessing the PLC.

In the CODESYS V2 web server prior to V1.1.9.22 crafted web server requests may cause a Null pointer dereference in the CODESYS web server and may result in a denial-of-service condition.

Crafted web server requests may cause a heap-based buffer overflow and could therefore trigger a denial-of- service condition due to a crash in the CODESYS V2 web server prior to V1.1.9.22.

CODESYS V2 runtime system before 2.4.7.55 has Improper Input Validation.

CODESYS V2 runtime system SP before 2.4.7.55 has a Heap-based Buffer Overflow.

Older firmware versions (FW1 up to FW10) of the WAGO PLC family 750-88x and 750-352 are vulnerable for a special denial of service attack.

The MMS Interpreter of WagoAppRTU in versions below 1.4.6.0 which is used by the WAGO Telecontrol Configurator is vulnerable to malformed packets. An remote unauthenticated attacker could send specifically crafted packets that lead to a denial-of-service condition until restart of the affected device.

The WBM web application on firmwares prior to 03.02.02 and 03.01.07 on the WAGO PFC100 and PFC2000, respectively, runs on a lighttpd web server and makes use of the FastCGI module, which is intended to provide high performance for all Internet applications without the penalties of Web server APIs. However, the default configuration of this module appears to limit the number of concurrent php-cgi processes to two, which can be abused to cause a denial of service of the entire web server. This affects WAGO PFC200 Firmware version 03.00.39(12) and version 03.01.07(13), and WAGO PFC100 Firmware version 03.00.39(12) and version 03.02.02(14).

In the CODESYS V2 web server prior to V1.1.9.22 crafted web server requests can trigger a parser error. Since the parser result is not checked under all conditions, a pointer dereference with an invalid address can occur. This leads to a denial of service situation.

CODESYS V2 Web-Server before 1.1.9.20 has a a Buffer Copy without Checking the Size of the Input.

In doInBackground of NotificationContentInflater.java, there is a possible temporary denial or service due to long running operations. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-252766417

A regular expression denial of service (ReDoS) vulnerability exits in cbioportal 3.6.21 and older via a POST request to /ProteinArraySignificanceTest.json.

sha256crypt and sha512crypt through 0.6 allow attackers to cause a denial of service (CPU consumption) because the algorithm's runtime is proportional to the square of the length of the password.

Specific IPv6 DHCP packets received by the jdhcpd daemon will cause a memory resource consumption issue to occur on a Junos OS device using the jdhcpd daemon configured to respond to IPv6 requests. Once started, memory consumption will eventually impact any IPv4 or IPv6 request serviced by the jdhcpd daemon, thus creating a Denial of Service (DoS) condition to clients requesting and not receiving IP addresses. Additionally, some clients which were previously holding IPv6 addresses will not have their IPv6 Identity Association (IA) address and network tables agreed upon by the jdhcpd daemon after the failover event occurs, which leads to more than one interface, and multiple IP addresses, being denied on the client. Affected releases are Juniper Networks Junos OS: 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2.

A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&P users who were authenticated prior to an attack.

IBM WebSphere Application Server Liberty 18.0.0.2 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 284574.

An Environment (CWE-2) vulnerability exists in SoMachine Basic, all versions, and Modicon M221(all references, all versions prior to firmware V1.10.0.0) which could cause cycle time impact when flooding the M221 ethernet interface while the Ethernet/IP adapter is activated.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

HTTP/2 incoming headers exceeding the limit are temporarily buffered in nghttp2 in order to generate an informative HTTP 413 response. If a client does not stop sending headers, this leads to memory exhaustion.

VSeeFace through 1.13.38.c2 allows attackers to cause a denial of service (application hang) via a spoofed UDP packet containing at least 10 digits in JSON data.

Fastify node module before 0.38.0 is vulnerable to a denial-of-service attack by sending a request with "Content-Type: application/json" and a very large payload.

Kerberos 5 (aka krb5) 1.21.2 contains a memory leak vulnerability in /krb5/src/lib/gssapi/krb5/k5sealv3.c.

sshpk is vulnerable to ReDoS when parsing crafted invalid public keys.

Insufficient file size checks resulted in a denial of service risk in the file picker's unzip functionality.

User-controlled operations could have allowed Denial of Service in M-Files Server before 23.4.12528.1 due to uncontrolled memory consumption.

IBM WebSphere Application Server 8.5, 9.0 and IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 are vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 281516.

A denial of service issue was discovered in GitLab CE/EE affecting all versions starting from 13.2.4 before 15.10.8, all versions starting from 15.11 before 15.11.7, all versions starting from 16.0 before 16.0.2 which allows an attacker to cause high resource consumption using malicious test report artifacts.

Very large headers can cause resource exhaustion when parsing message. The message-parser normally reads reasonably sized chunks of the message. However, when it feeds them to message-header-parser, it starts building up "full_value" buffer out of the smaller chunks. The full_value buffer has no size limit, so large headers can cause large memory usage. It doesn't matter whether it's a single long header line, or a single header split into multiple lines. This bug exists in all Dovecot versions. Incoming mails typically have some size limits set by MTA, so even largest possible header size may still fit into Dovecot's vsz_limit. So attackers probably can't DoS a victim user this way. A user could APPEND larger mails though, allowing them to DoS themselves (although maybe cause some memory issues for the backend in general). One can implement restrictions on headers on MTA component preceding Dovecot. No publicly available exploits are known.

Configuration defects in the secure OS module.Successful exploitation of this vulnerability will affect availability.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.3, excessive memory use during pgsql parsing could lead to OOM-related crashes. This vulnerability is patched in 7.0.3. As workaround, users can disable the pgsql app layer parser.

Fileszie Check vulnerabilities allow a malicious user to bypass size limits or overload to the product.  Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 6.0.16 and 7.0.3, an attacker can craft traffic to cause Suricata to use far more CPU and memory for processing the traffic than needed, which can lead to extreme slow downs and denial of service. This vulnerability is patched in 6.0.16 or 7.0.3. Workarounds include disabling the affected protocol app-layer parser in the yaml and reducing the `stream.reassembly.depth` value helps reduce the severity of the issue.

Versions of the package @eslint/plugin-kit before 0.2.3 are vulnerable to Regular Expression Denial of Service (ReDoS) due to improper input sanitization. An attacker can increase the CPU usage and crash the program by exploiting this vulnerability.

An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). If a high rate of specific valid packets are processed by the routing engine (RE) this will lead to a loss of connectivity of the RE with other components of the chassis and thereby a complete and persistent system outage. Please note that a carefully designed lo0 firewall filter will block or limit these packets which should prevent this issue from occurring. The following log messages can be seen when this issue occurs: <host> kernel: nf_conntrack: nf_conntrack: table full, dropping packet This issue affects Juniper Networks Junos OS Evolved: * All versions earlier than 20.4R3-S7-EVO; * 21.2R1-EVO and later versions; * 21.4-EVO versions earlier than 21.4R3-S5-EVO; * 22.1-EVO versions earlier than 22.1R3-S2-EVO; * 22.2-EVO versions earlier than 22.2R3-EVO; * 22.3-EVO versions earlier than 22.3R2-EVO; * 22.4-EVO versions earlier than 22.4R2-EVO.

Amazon Ion is a Java implementation of the Ion data notation. Prior to version 1.10.5, a potential denial-of-service issue exists in `ion-java` for applications that use `ion-java` to deserialize Ion text encoded data, or deserialize Ion text or binary encoded data into the `IonValue` model and then invoke certain `IonValue` methods on that in-memory representation. An actor could craft Ion data that, when loaded by the affected application and/or processed using the `IonValue` model, results in a `StackOverflowError` originating from the `ion-java` library. The patch is included in `ion-java` 1.10.5. As a workaround, do not load data which originated from an untrusted source or that could have been tampered with.