A DNS misconfiguration was found in Zyxel NBG7510 firmware versions prior to V1.00(ABZY.3)C0, which could allow an unauthenticated attacker to access the DNS server when the device is switched to the AP mode.
The ZyXEL Wireless N300 NetUSB NBG-419N router with firmware 1.00(BFQ.6)C0 allows remote attackers to bypass authentication by using %2F sequences in place of / (slash) characters.
An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. Through an undocumented sequence of keypresses, undocumented functionality is triggered. A diagnostics shell is triggered via CTRL-ALT-t, which prompts for the password returned by fds_sys_passDebugPasswd_ret(). The firmware contains access control checks that determine if remote users are allowed to access this functionality. The function that performs this check (fds_sys_remoteDebugEnable_ret in libfds.so) always return TRUE with no actual checks performed. The diagnostics menu allows for reading/writing arbitrary registers and various other configuration parameters which are believed to be related to the network interface chips.
A downgrade from two-factor authentication to one-factor authentication vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.32 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, and VPN series firmware versions 4.32 through 5.21, that could allow an authenticated attacker to bypass the second authentication phase to connect the IPsec VPN server even though the two-factor authentication (2FA) was enabled.
**UNSUPPORTED WHEN ASSIGNED** The improper authentication vulnerability in the Zyxel P-6101C ADSL modem firmware version P-6101CSA6AP_20140331 could allow an unauthenticated attacker to read some device information via a crafted HTTP HEAD method.
A vulnerability in specific versions of Zyxel NBG6818, NBG7815, WSQ20, WSQ50, WSQ60, and WSR30 firmware with pre-configured password management could allow an attacker to obtain root access of the device, if the local attacker dismantles the device and uses a USB-to-UART cable to connect the device, or if the remote assistance feature had been enabled by an authenticated user.
On Zyxel NBG2105 V1.00(AAGU.2)C0 devices, setting the login cookie to 1 provides administrator access.
Certain Zyxel products have a locally accessible binary that allows a non-root user to generate a password for an undocumented user account that can be used for a TELNET session as root. This affects NAS520 V5.21(AASZ.4)C0, V5.21(AASZ.0)C0, V5.11(AASZ.3)C0, and V5.11(AASZ.0)C0; NAS542 V5.11(ABAG.0)C0, V5.20(ABAG.1)C0, and V5.21(ABAG.3)C0; NSA325 v2_V4.81(AALS.0)C0 and V4.81(AAAJ.1)C0; NSA310 4.22(AFK.0)C0 and 4.22(AFK.1)C0; NAS326 V5.21(AAZF.8)C0, V5.11(AAZF.4)C0, V5.11(AAZF.2)C0, and V5.11(AAZF.3)C0; NSA310S V4.75(AALH.2)C0; NSA320S V4.75(AANV.2)C0 and V4.75(AANV.1)C0; NSA221 V4.41(AFM.1)C0; and NAS540 V5.21(AATB.5)C0 and V5.21(AATB.3)C0.
Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.
The Openfire server in Cisco Finesse Desktop 10.5(1) and 11.0(1) and Unified Contact Center Express 10.6(1) has a hardcoded account, which makes it easier for remote attackers to obtain access via an XMPP session, aka Bug ID CSCuw79085.
ZyXEL Prestige routers, including P-660, P-661, and P-662 models with firmware 3.40(AGD.2) through 3.40(AHQ.3), allow remote authenticated users to obtain authentication data by making direct HTTP requests and then reading the HTML source, as demonstrated by a request for (1) RemMagSNMP.html, which discloses SNMP communities; or (2) WLAN.html, which discloses WEP keys.
The Zyxel P-2602HW-D1A router with 3.40(AJZ.1) firmware maintains authentication state by IP address, which allows remote attackers to bypass authentication by establishing a session from a source IP address of a user who previously authenticated within the previous 5 minutes.
An improper authentication vulnerability in the authentication module of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to obtain system information by sending a crafted URL to a vulnerable device.
OpenMetadata is a unified platform for discovery, observability, and governance powered by a central metadata repository, in-depth lineage, and seamless team collaboration. The `JwtFilter` handles the API authentication by requiring and verifying JWT tokens. When a new request comes in, the request's path is checked against this list. When the request's path contains any of the excluded endpoints the filter returns without validating the JWT. Unfortunately, an attacker may use Path Parameters to make any path contain any arbitrary strings. For example, a request to `GET /api/v1;v1%2fusers%2flogin/events/subscriptions/validation/condition/111` will match the excluded endpoint condition and therefore will be processed with no JWT validation allowing an attacker to bypass the authentication mechanism and reach any arbitrary endpoint, including the ones listed above that lead to arbitrary SpEL expression injection. This bypass will not work when the endpoint uses the `SecurityContext.getUserPrincipal()` since it will return `null` and will throw an NPE. This issue may lead to authentication bypass and has been addressed in version 1.2.4. Users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as `GHSL-2023-237`.
Improper Authentication vulnerability in the "LDAP / SSO Authentication" (ig_ldap_sso_auth) extension 2.0.0 for TYPO3.
Veritas APTARE versions prior to 10.4 included code that bypassed the normal login process when specific authentication credentials were provided to the server.
The N-central server is vulnerable to an authentication bypass of the user interface. This vulnerability is present in all deployments of N-central prior to 2024.2. This vulnerability was discovered through internal N-central source code review and N-able has not observed any exploitation in the wild.
VMware Workspace ONE Assist prior to 22.10 contains an Authentication Bypass vulnerability. A malicious actor with network access to Workspace ONE Assist may be able to obtain administrative access without the need to authenticate to the application.
Roxy-wi is an open source web interface for managing Haproxy, Nginx, Apache and Keepalived servers. A vulnerability in Roxy-wi allows a remote, unauthenticated attacker to bypass authentication and access admin functionality by sending a specially crafted HTTP request. This affects Roxywi versions before 6.1.1.0. Users are advised to upgrade. There are no known workarounds for this issue.
Sierra Wireless AirLink Mobility Manager (AMM) before 2.17 mishandles sessions and thus an unauthenticated attacker can obtain a login session with administrator privileges.
An improper authentication vulnerability in FortiMail 5.4.10, 6.0.7, 6.2.2 and earlier and FortiVoiceEntreprise 6.0.0 and 6.0.1 may allow a remote unauthenticated attacker to access the system as a legitimate user by requesting a password change via the user interface.
This vulnerability allows remote attackers to reset the password of anonymous users without authorization on the affected LG LED Assistant.
This vulnerability allows remote attackers to bypass authentication on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SSH port forwarding requests during initial setup. The issue results from the lack of proper authentication prior to establishing SSH port forwarding rules. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the WAN interface. Was ZDI-CAN-9664.
Chat Server is the chat server for Vartalap, an open-source messaging application. Versions 2.3.2 until 2.6.0 suffer from a bug in validating the access token, resulting in authentication bypass. The function `this.authProvider.verifyAccessKey` is an async function, as the code is not using `await` to wait for the verification result. Every time the function responds back with success, along with an unhandled exception if the token is invalid. A patch is available in version 2.6.0.
OpenVPN Access Server 2.8.x before 2.8.1 allows LDAP authentication bypass (except when a user is enrolled in two-factor authentication).
Improper authentication vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary command with the root privilege via the internet.
The management console in Symantec Endpoint Protection Manager (SEPM) 12.1 before 12.1-RU6-MP1 allows remote attackers to bypass authentication via a crafted password-reset action that triggers a new administrative session.
CWE-287: Improper Authentication vulnerability exists which could cause the execution of commands on the webserver without authentication when sending specially crafted HTTP requests.
A vulnerability in the authentication logic of Wyze Cam Pan v2, Cam v2, Cam v3 allows an attacker to bypass login and control the devices. This issue affects: Wyze Cam Pan v2 versions prior to 4.49.1.47. Wyze Cam v2 versions prior to 4.9.8.1002. Wyze Cam v3 versions prior to 4.36.8.32.
Improper authentication vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary command with the root privilege via the internet.
CWE-287: Improper Authentication may allow Authentication Bypass
Sonatype Nexus Repository Manager before 3.17.0 establishes a default administrator user with weak defaults (fixed credentials).
The web application portal of the Cobham EXPLORER 710, firmware version 1.07, allows unauthenticated access to port 5454. This could allow an unauthenticated, remote attacker to connect to this port via Telnet and execute 86 Attention (AT) commands, including some that provide unauthenticated, shell-like access to the device.
A vulnerability has been found in harrystech Dynosaur-Rails and classified as critical. Affected by this vulnerability is the function basic_auth of the file app/controllers/application_controller.rb. The manipulation leads to improper authentication. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is named 04b223813f0e336aab50bff140d0f5889c31dbec. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-221503.
Netsweeper before 4.0.5 allows remote attackers to bypass authentication and create arbitrary accounts and policies via a request to webadmin/nslam/index.php.
An issue in Daily Habit Tracker v.1.0 allows a remote attacker to manipulate trackers via the home.php, add-tracker.php, delete-tracker.php, update-tracker.php components.
The Client Filter Admin portal in Netsweeper before 3.1.10, 4.0.x before 4.0.9, and 4.1.x before 4.1.2 allows remote attackers to bypass authentication and subsequently create arbitrary profiles via a showdeny action to the default URL.
The SolarWinds Access Rights Manager was found to be susceptible to a pre-authentication remote code execution vulnerability. If exploited, this vulnerability allows an unauthenticated user to run commands and executables.
confirm.php in ATutor 2.2 and earlier allows remote attackers to bypass authentication and gain access as an existing user via the auto_login parameter.
Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows OAUTH Security Bypass OVE-20230524-0016.
A vulnerability has been identified in Polarion ALM (All versions < V2404.0). The REST API endpoints of doorsconnector of the affected product lacks proper authentication. An unauthenticated attacker could access the endpoints, and potentially execute code.
The SolarWinds Access Rights Manager was found to be susceptible to a Remote Code Execution Vulnerability. If exploited, this vulnerability allows an authenticated user to abuse a SolarWinds service resulting in remote code execution.
The SolarWinds Access Rights Manager was found to be susceptible to an authentication bypass vulnerability. This vulnerability allows an unauthenticated user to gain domain admin access within the Active Directory environment. Â
Wire is an encrypted communication and collaboration platform. Versions prior to 2022-07-12/Chart 4.19.0 are subject to Token Recipient Confusion. If an attacker has certain details of SAML IdP metadata, and configures their own SAML on the same backend, the attacker can delete all SAML authenticated accounts of a targeted team, Authenticate as a user of the attacked team and create arbitrary accounts in the context of the team if it is not managed by SCIM. This issue is fixed in wire-server 2022-07-12 and is already deployed on all Wire managed services. On-premise instances of wire-server need to be updated to 2022-07-12/Chart 4.19.0, so that their backends are no longer affected. As a workaround, the risk of an attack can be reduced by disabling SAML configuration for teams (galley.config.settings.featureFlags.sso). Helm overrides are located in `values/wire-server/values.yaml` Note that the ability to configure SAML SSO as a team is disabled by default for on-premise installations.
VMware Workspace ONE Assist prior to 22.10 contains a Broken Authentication Method vulnerability. A malicious actor with network access to Workspace ONE Assist may be able to obtain administrative access without the need to authenticate to the application.
The Motorola ACE1000 RTU through 2022-05-02 has default credentials. It exposes an SSH interface on port 22/TCP. This interface is used for remote maintenance and for SFTP file-transfer operations that are part of engineering software functionality. Access to this interface is controlled by 5 preconfigured accounts (root, abuilder, acelogin, cappl, ace), all of which come with default credentials. Although the ACE1000 documentation mentions the root, abuilder and acelogin accounts and instructs users to change the default credentials, the cappl and ace accounts remain undocumented and thus are unlikely to have their credentials changed.
Dell PowerProtect Cyber Recovery versions before 19.11.0.2 contain an authentication bypass vulnerability. A remote unauthenticated attacker may potentially access and interact with the docker registry API leading to an authentication bypass. The attacker may potentially alter the docker images leading to a loss of integrity and confidentiality
The server checks the user's cookie in a non-standard way, and a value is entered in the cookie value name of the status and its value is set to true to bypass the identification with the system using a username and password.
A CWE-287: Improper Authentication vulnerability exists that could allow an attacker to take over the admin account when an attacker hijacks a session. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)
The MySQL database in McAfee Network Data Loss Prevention (NDLP) before 9.3 does not require a password, which makes it easier for remote attackers to obtain access.