Motorola MBTS Site Controller accepts hard-coded backdoor password. The Motorola MBTS Site Controller Man Machine Interface (MMI), allowing for service technicians to diagnose and configure the device, accepts a hard-coded backdoor password that cannot be changed or disabled.

The Motorola ACE1000 RTU through 2022-05-02 ships with a hardcoded SSH private key and initialization scripts (such as /etc/init.d/sshd_service) only generate a new key if no private-key file exists. Thus, this hardcoded key is likely to be used by default.

A command injection vulnerability in HNAP1/GetNetworkTomographySettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary code.

The Motorola MH702x devices, prior to version 2.0.0.301, do not properly verify the server certificate during communication with the support server which could lead to the communication channel being accessible by an attacker.

Some Motorola devices include the SIMalliance Toolbox Browser (aka S@T Browser) on the UICC, which might allow remote attackers to retrieve location and IMEI information, or retrieve other data or execute certain commands, via SIM Toolkit (STK) instructions in an SMS message, aka Simjacker.

The Motorola ACE1000 RTU through 2022-05-02 uses ECB encryption unsafely. It can communicate with an XRT LAN-to-radio gateway by means of an embedded client. Credentials for accessing this gateway are stored after being encrypted with the Tiny Encryption Algorithm (TEA) in ECB mode using a hardcoded key. Similarly, the ACE1000 RTU can route MDLC traffic over Extended Command and Management Protocol (XCMP) and Network Layer (XNL) networks via the MDLC driver. Authentication to the XNL port is protected by TEA in ECB mode using a hardcoded key.

An command injection vulnerability in HNAP1/SetWLanApcliSettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary system commands.

An attacker can access the maintenance console using hard coded credentials for a hidden wireless network on the device.

A command injection vulnerability could allow an authenticated user to execute operating system commands as root via a specially crafted API request.

An authentication bypass vulnerability exists in the web component of the Motorola MR2600. An attacker can exploit this vulnerability to access protected URLs and retrieve sensitive information.

A vulnerability has been identified in the MR2600 router v1.0.18 and earlier that could allow an attacker within range of the wireless network to successfully brute force the WPS pin, potentially allowing them unauthorized access to a wireless network.

An authentication bypass vulnerability could allow an attacker to access API functions without authentication.

A vulnerability in /Login.html of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to bypass login and obtain a partially authorized token and uid.

The Motorola MM1000 device configuration portal can be accessed without authentication, which could allow adapter settings to be modified.

The N-central server is vulnerable to an authentication bypass of the user interface. This vulnerability is present in all deployments of N-central prior to 2024.2. This vulnerability was discovered through internal N-central source code review and N-able has not observed any exploitation in the wild.

Array Networks Array AG Series and vxAG (9.4.0.481 and earlier) allow remote code execution. An attacker can browse the filesystem on the SSL VPN gateway using a flags attribute in an HTTP header without authentication. The product could then be exploited through a vulnerable URL. The 2023-03-09 vendor advisory stated "a new Array AG release with the fix will be available soon."

Certain ASUS router models have authentication bypass vulnerability, allowing unauthenticated remote attackers to log in the device.

This vulnerability allows remote attackers to reset the password of anonymous users without authorization on the affected LG LED Assistant.

In Apache httpd 2.2.0 to 2.4.29, when generating an HTTP Digest authentication challenge, the nonce sent to prevent reply attacks was not correctly generated using a pseudo-random seed. In a cluster of servers using a common Digest authentication configuration, HTTP requests could be replayed across servers by an attacker without detection.

An authentication bypass in Optoma 1080PSTX C02 allows an attacker to access the administration console without valid credentials.

An issue in WooCommerce Payments plugin for WordPress (versions 5.6.1 and lower) allows an unauthenticated attacker to send requests on behalf of an elevated user, like administrator. This allows a remote, unauthenticated attacker to gain admin access on a site that has the affected version of the plugin activated.

api/auth.go in Ansible Semaphore before 2.8.89 mishandles authentication.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from an authentication bypass vulnerability, where a special username with a deterministic password can be leveraged to bypass authentication checks and execute OS commands as the root user.

Improper authentication vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary command with the root privilege via the internet.

Osprey Pump Controller version 1.01 could allow an unauthenticated user to create an account and bypass authentication, thereby gaining unauthorized access to the system. A threat actor could exploit this vulnerability to create a user account without providing valid credentials. A threat actor who successfully exploits this vulnerability could gain access to the pump controller and cause disruption in operation, modify data, or shut down the controller.

An issue was discovered in WildFly 10.1.2.Final. In the case of a default installation without a security realm reference, an attacker can successfully access the server without authentication. NOTE: the Security Realms documentation in the product's Admin Guide indicates that "without a security realm reference" implies "effectively unsecured." The vendor explicitly supports these unsecured configurations because they have valid use cases during development

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

A vulnerability has been identified in Polarion ALM (All versions < V2404.0). The REST API endpoints of doorsconnector of the affected product lacks proper authentication. An unauthenticated attacker could access the endpoints, and potentially execute code.

Improper authentication vulnerability in T&D Corporation and ESPEC MIC CORP. data logger products allows a remote unauthenticated attacker to login to the product as a registered user. Affected products and versions are as follows: T&D Corporation data logger products (TR-71W/72W all firmware versions, RTR-5W all firmware versions, WDR-7 all firmware versions, WDR-3 all firmware versions, and WS-2 all firmware versions), and ESPEC MIC CORP. data logger products (RT-12N/RS-12N all firmware versions, RT-22BN all firmware versions, and TEU-12N all firmware versions).

Clerk helps developers build user management. Unauthorized access or privilege escalation due to a logic flaw in auth() in the App Router or getAuth() in the Pages Router. This vulnerability was patched in version 4.29.3.

omniauth-microsoft_graph provides an Omniauth strategy for the Microsoft Graph API. Prior to versions 2.0.0, the implementation did not validate the legitimacy of the `email` attribute of the user nor did it give/document an option to do so, making it susceptible to nOAuth misconfiguration in cases when the `email` is used as a trusted user identifier. This could lead to account takeover. Version 2.0.0 contains a fix for this issue.

An improper authentication vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

Rubygems.org is the Ruby community's gem hosting service. Rubygems.org users with MFA enabled would normally be protected from account takeover in the case of email account takeover. However, a workaround on the forgotten password form allows an attacker to bypass the MFA requirement and takeover the account. This vulnerability has been patched in commit 0b3272a.

maddy is a composable, all-in-one mail server. Starting with version 0.2.0 and prior to version 0.6.3, maddy allows a full authentication bypass if SASL authorization username is specified when using the PLAIN authentication mechanisms. Instead of validating the specified username, it is accepted as is after checking the credentials for the authentication username. maddy 0.6.3 includes the fix for the bug. There are no known workarounds.

An improper authentication vulnerability has been identified in SonicWall SonicOS SSL-VPN feature, which in specific conditions could allow a remote attacker to bypass authentication.  This issue affects only firmware version SonicOS 7.1.1-7040.

Adobe FrameMaker Publishing Server versions 2022.1 and earlier are affected by an Improper Authentication vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass authentication mechanisms and gain unauthorized access. Exploitation of this issue does not require user interaction.

OpenPAM Nummularia 9.2 through 10.0 does not properly handle the error reported when an include directive refers to a policy that does not exist, which causes the loaded policy chain to no be discarded and allows context-dependent attackers to bypass authentication via a login (1) without a password or (2) with an incorrect password.

An issue in Daily Habit Tracker v.1.0 allows a remote attacker to manipulate trackers via the home.php, add-tracker.php, delete-tracker.php, update-tracker.php components.

Teltonika’s Remote Management System versions 4.14.0 is vulnerable to an unauthorized attacker registering previously unregistered devices through the RMS platform. If the user has not disabled the "RMS management feature" enabled by default, then an attacker could register that device to themselves. This could enable the attacker to perform different operations on the user's devices, including remote code execution with 'root' privileges (using the 'Task Manager' feature on RMS).

Unauthenticated RCE in HPE Insight Cluster Management Utility

The vulnerability could be remotely exploited to bypass authentication.

Improper Authentication vulnerability in Apache Software Foundation Apache IoTDB.This issue affects Apache IoTDB Grafana Connector: from 0.13.0 through 0.13.3. Attackers could login without authorization. This is fixed in 0.13.4.

The PayU CommercePro Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.8.3. This is due to /wp-json/payu/v1/generate-user-token and /wp-json/payu/v1/get-shipping-cost REST API endpoints not properly verifying a user's identity prior to setting the users ID and auth cookies. This makes it possible for unauthenticated attackers to create new administrative user accounts.

An access control issue in H3C A210-G A210-GV100R005 allows attackers to authenticate without a password.

An authentication bypass vulnerability exists in the httpd nvram.cgi functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

The UserPro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.1. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. An attacker can leverage CVE-2023-2448 and CVE-2023-2446 to get the user's email address to successfully exploit this vulnerability.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in Epikur before 20.1.1. The Epikur server contains the checkPasswort() function that, upon user login, checks the submitted password against the user password's MD5 hash stored in the database. It is also compared to a second MD5 hash, which is the same for every user (aka a "Backdoor Password" of 3p1kursupport). If the submitted password matches either one, access is granted.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Priority Web version 19.1.0.68, parameter manipulation on an unspecified end-point may allow authentication bypass.