Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the config_sequence parameter in other_para of cgitest.cgi.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B".

A vulnerability has been identified in SINEC NMS (All versions < V2.0 SP1). The affected application incorrectly neutralizes special elements when creating a report which could lead to command injection.

Active debug code exists in Yamaha wireless LAN access point devices. If a logged-in user who knows how to use the debug function accesses the device's management page, this function can be enabled by performing specific operations. As a result, an arbitrary OS command may be executed and/or configuration settings of the device may be altered. Affected products and versions are as follows: WLX222 firmware Rev.24.00.03 and earlier, WLX413 firmware Rev.22.00.05 and earlier, WLX212 firmware Rev.21.00.12 and earlier, WLX313 firmware Rev.18.00.12 and earlier, and WLX202 firmware Rev.16.00.18 and earlier.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

Multiple TP-LINK products allow a network-adjacent authenticated attacker with access to the product from the LAN port or Wi-Fi to execute arbitrary OS commands.

There is a command injection vulnerability in ZTE MF258 Pro product. Due to insufficient validation of Ping Diagnosis interface parameter, an authenticated attacker could use the vulnerability to execute arbitrary commands.

Buffalo WCR-1166DS devices with firmware 1.30 and earlier allow an attacker to execute arbitrary OS commands via unspecified vectors.

The Buffalo WHR-1166DHP 1.60 and earlier, WSR-600DHP 1.60 and earlier, WHR-600D 1.60 and earlier, WHR-300HP2 1.60 and earlier, WMR-300 1.60 and earlier, WEX-300 1.60 and earlier, and BHR-4GRV2 1.04 and earlier routers allow remote authenticated users to execute arbitrary OS commands via unspecified vectors.

CG-WLR300NM Firmware version 1.90 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

TP-Link Omada ER605 Access Control Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605. Authentication is required to exploit this vulnerability. The specific issue exists within the handling of the name field in the access control user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22227.

/jsonrpc on D-Link DIR-841 3.03 and 3.04 devices allows authenticated command injection via ping, ping6, or traceroute (under System Tools).

In Splunk Enterprise versions below 9.4.3, 9.3.5, 9.2.7, and 9.1.10, a user who holds a role that contains the high-privilege capability `edit_scripted` and `list_inputs` capability , could perform a remote command execution due to improper user input sanitization on the scripted input files.<br><br>See [Define roles on the Splunk platform with capabilities](https://docs.splunk.com/Documentation/Splunk/latest/Security/Rolesandcapabilities) and [Setting up a scripted input ](https://docs.splunk.com/Documentation/Splunk/9.4.2/AdvancedDev/ScriptSetup)for more information.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in Uniview ISC 2500-S up to 20210930. Affected by this issue is the function setNatConfig of the file /Interface/DevManage/VM.php. The manipulation of the argument natAddress/natPort/natServerPort leads to os command injection. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251696. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

lhn/public/network/ping in HP SAN/iQ before 9.5 on the HP Virtual SAN Appliance allows remote authenticated users to execute arbitrary commands via shell metacharacters in the second parameter.

lhn/public/network/ping in HP SAN/iQ 9.5 on the HP Virtual SAN Appliance allows remote authenticated users to execute arbitrary commands via shell metacharacters in the (1) first, (2) third, or (3) fourth parameter. NOTE: this vulnerability exists because of an incomplete fix for CVE-2012-4361.

ELECOM LAN routers (WRC-1167GST2 firmware v1.25 and prior, WRC-1167GST2A firmware v1.25 and prior, WRC-1167GST2H firmware v1.25 and prior, WRC-2533GS2-B firmware v1.52 and prior, WRC-2533GS2-W firmware v1.52 and prior, WRC-1750GS firmware v1.03 and prior, WRC-1750GSV firmware v2.11 and prior, WRC-1900GST firmware v1.03 and prior, WRC-2533GST firmware v1.03 and prior, WRC-2533GSTA firmware v1.03 and prior, WRC-2533GST2 firmware v1.25 and prior, WRC-2533GST2SP firmware v1.25 and prior, WRC-2533GST2-G firmware v1.25 and prior, and EDWRC-2533GST2 firmware v1.25 and prior) allows a network-adjacent authenticated attacker to execute an arbitrary OS command via unspecified vectors.

ELECOM LAN routers (WRH-733GBK firmware v1.02.9 and prior and WRH-733GWH firmware v1.02.9 and prior) allows a network-adjacent attacker with an administrator privilege to execute arbitrary OS commands via unspecified vectors.

ELECOM LAN routers (WRH-733GBK firmware v1.02.9 and prior and WRH-733GWH firmware v1.02.9 and prior) allows a network-adjacent attacker with an administrator privilege to execute arbitrary OS commands via unspecified vectors.

RFNTPS firmware versions System_01000004 and earlier, and Web_01000004 and earlier allow an attacker on the same network segment to execute arbitrary OS commands with a root privilege via unspecified vectors.

LOGITEC LAN-W300N/PGRB allows an attacker with administrative privilege to execute arbitrary OS commands via unspecified vectors.

A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

ELECOM WRC-300FEBK-S allows an attacker with administrator rights to execute arbitrary OS commands via unspecified vectors.

OS command injection vulnerability in ELECOM routers (WRC-1167GST2 firmware v1.25 and prior, WRC-1167GST2A firmware v1.25 and prior, WRC-1167GST2H firmware v1.25 and prior, WRC-2533GS2-B firmware v1.52 and prior, WRC-2533GS2-W firmware v1.52 and prior, WRC-1750GS firmware v1.03 and prior, WRC-1750GSV firmware v2.11 and prior, WRC-1900GST firmware v1.03 and prior, WRC-2533GST firmware v1.03 and prior, WRC-2533GSTA firmware v1.03 and prior, WRC-2533GST2 firmware v1.25 and prior, WRC-2533GST2SP firmware v1.25 and prior, WRC-2533GST2-G firmware v1.25 and prior, and EDWRC-2533GST2 firmware v1.25 and prior) allows a network-adjacent authenticated attackers to execute an arbitrary OS command with the root privilege via unspecified vectors.

D-Link DIR-X3260 SetSysEmailSettings EmailTo Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within prog.cgi, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21158.

The VPN software within HP ThinPro does not safely handle user supplied input, which may be leveraged by an attacker to inject commands that will execute with root privileges.

Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker with an administrative privilege to send a specially crafted request to a specific URL, which may result in an arbitrary command execution.

Aterm series (Aterm WF1200C firmware Ver1.2.1 and earlier, Aterm WG1200CR firmware Ver1.2.1 and earlier, Aterm WG2600HS firmware Ver1.3.2 and earlier) allows an authenticated attacker on the same network segment to execute arbitrary OS commands with root privileges via management screen.

Aterm WG2600HS firmware Ver1.3.2 and earlier allows an authenticated attacker on the same network segment to execute arbitrary OS commands with root privileges via unspecified vectors.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetVirtualServerSettings requests to the web management portal. When parsing subelements within the VirtualServerInfo element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16151.

OS command injection vulnerability in WRC-X3000GSN v1.0.2, WRC-X3000GS v1.0.24 and earlier, and WRC-X3000GSA v1.0.24 and earlier allows a network-adjacent attacker with an administrative privilege to execute an arbitrary OS command by sending a specially crafted request to the product.

Softnext Mail SQR Expert is an email management platform, it has insufficient filtering for a special character within a spcific function. A remote attacker authenticated as a localhost can exploit this vulnerability to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

OS command injection vulnerability in WRC-X5400GS-B v1.0.10 and earlier, and WRC-X5400GSA-B v1.0.10 and earlier allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

On the Alcatel-Lucent Enterprise (ALE) 8008 Cloud Edition Deskphone VoIP phone with firmware 1.50.13, a command injection (missing input validation) issue in the password change field for the Change Password interface allows an authenticated remote attacker in the same network to trigger OS commands via shell commands in a POST request.

NETGEAR RAX30 libcms_cli Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the libcms_cli module. The issue results from the lack of proper validation of a user-supplied command before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19838.

On the Polycom Obihai Obi1022 VoIP phone with firmware 5.1.11, a command injection (missing input validation) issue in the NTP server IP address field for the "Time Service Settings web" interface allows an authenticated remote attacker in the same network to trigger OS commands via shell commands in a POST request.

Command injection vulnerability in Comtrend router WLD71-T1_v2.0.201820, affecting the GRG-4280us version. This vulnerability could allow an authenticated user to execute commands inside the router by making a POST request to the URL “/boaform/admin/formUserTracert”.

A vulnerability exists that can be exploited by an authenticated client that is connected to the same network segment as the CoreTec 4, having any level of access VIEWER to ADMIN. To exploit the vulnerability the attacker can inject shell commands through a particular field of the web user interface that will be executed by the system.

Archer C5 firmware all versions and Archer C7 firmware versions prior to 'Archer C7(JP)_V2_230602' allow a network-adjacent authenticated attacker to execute arbitrary OS commands. Note that Archer C5 is no longer supported, therefore the update for this product is not provided.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "desc" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "week" parameter in setWiFiScheduleCfg.

An issue in TOTOLINK-CX-A3002RU V1.0.4-B20171106.1512 and TOTOLINK-CX-N150RT V2.1.6-B20171121.1002 and TOTOLINK-CX-N300RT V2.1.6-B20170724.1420 and TOTOLINK-CX-N300RT V2.1.8-B20171113.1408 and TOTOLINK-CX-N300RT V2.1.8-B20191010.1107 and TOTOLINK-CX-N302RE V2.0.2-B20170511.1523 allows a remote attacker to execute arbitrary code via the /boafrm/formSysCmd component.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the restore function.

Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the wan_gateway parameter at wiz_fix2.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the sysNewPasswd parameter at admin_account.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

Netgear XR300 v1.0.3.78 was discovered to contain a command injection vulnerability in the system_name parameter at wiz_dyn.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

D-Link DIR_823G 1.0.2B05 was discovered to contain a command injection vulnerability via the HostName parameter in the SetWanSettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

Tenda AC7 v.15.03.06.44 ate_iwpriv_set has pre-authentication command injection allowing remote attackers to execute arbitrary code.