"Dokodemo eye Smart HD" SCR02HD Firmware 1.0.3.1000 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Buffalo WCR-1166DS devices with firmware 1.30 and earlier allow an attacker to execute arbitrary OS commands via unspecified vectors.

Multiple improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerabilities [CWE-78] in FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.19 and below may allow an authenticated attacker to execute unauthorized code or commands via crafted parameters of HTTP requests.

The VPN software within HP ThinPro does not safely handle user supplied input, which may be leveraged by an attacker to inject commands that will execute with root privileges.

CG-WLR300NM Firmware version 1.90 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

lhn/public/network/ping in HP SAN/iQ before 9.5 on the HP Virtual SAN Appliance allows remote authenticated users to execute arbitrary commands via shell metacharacters in the second parameter.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetSysLogSettings requests to the web management portal. When parsing the IPAddress element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16154.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetIPv6FirewallSettings requests to the web management portal. When parsing subelements within the IPv6FirewallRule element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16148.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetQoSSettings requests to the web management portal. When parsing subelements within the QoSInfo element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16153.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetStaticRouteIPv6Settings requests to the web management portal. When parsing subelements within the StaticRouteIPv6List element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16145.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetSysEmailSettings requests to the web management portal. When parsing subelements within the SetSysEmailSettings element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16149.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetVirtualServerSettings requests to the web management portal. When parsing subelements within the VirtualServerInfo element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16151.

OS command injection vulnerability in Buffalo network devices allows a network-adjacent attacker with an administrative privilege to execute an arbitrary OS command if a specially crafted request is sent to a specific CGI program.

gl-inet GL-MT300N-V2 Mango v3.212 and GL-AX1800 Flint v3.214 were discovered to contain multiple command injection vulnerabilities via the ping_addr and trace_addr function parameters.

DrayTek Vigor3910 devices through 4.3.2.6 are affected by an OS command injection vulnerability that allows an attacker to leverage the recvCmd binary to escape from the emulated instance and inject arbitrary commands into the host machine.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.

In Splunk Enterprise versions below 9.4.3, 9.3.5, 9.2.7, and 9.1.10, a user who holds a role that contains the high-privilege capability `edit_scripted` and `list_inputs` capability , could perform a remote command execution due to improper user input sanitization on the scripted input files.<br><br>See [Define roles on the Splunk platform with capabilities](https://docs.splunk.com/Documentation/Splunk/latest/Security/Rolesandcapabilities) and [Setting up a scripted input ](https://docs.splunk.com/Documentation/Splunk/9.4.2/AdvancedDev/ScriptSetup)for more information.

Multiple authenticated operating system (OS) command injection vulnerabilities exist in Firewalla Box Software versions before 1.979. A physically close attacker that is authenticated to the Bluetooth Low-Energy (BTLE) interface can use the network configuration service to inject commands in various configuration parameters including networkConfig.Interface.Phy.Eth0.Extra.PingTestIP, networkConfig.Interface.Phy.Eth0.Extra.DNSTestDomain, and networkConfig.Interface.Phy.Eth0.Gateway6. Additionally, because the configuration can be synced to the Firewalla cloud, the attacker may be able to persist access even after hardware resets and firmware re-flashes.

A command injection vulnerability in the CGI program of Zyxel VMG3312-T20A firmware version 5.30(ABFX.5)C0 could allow a local authenticated attacker to execute arbitrary OS commands on a vulnerable device via a LAN interface.

A post-authentication command injection vulnerability in the CGI program in the Zyxel GS1900-48 switch firmware version V2.80(AAHN.1)C0 and earlier could allow an authenticated, LAN-based attacker with administrator privileges to execute some operating system (OS) commands on an affected device by sending a crafted HTTP request.

A command injection vulnerability was reported in some Lenovo Personal Cloud Storage devices that could allow an authenticated user to execute operating system commands by sending a crafted packet to the device.

The Buffalo WHR-1166DHP 1.60 and earlier, WSR-600DHP 1.60 and earlier, WHR-600D 1.60 and earlier, WHR-300HP2 1.60 and earlier, WMR-300 1.60 and earlier, WEX-300 1.60 and earlier, and BHR-4GRV2 1.04 and earlier routers allow remote authenticated users to execute arbitrary OS commands via unspecified vectors.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "eMinute" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "desc" parameter in setWiFiScheduleCfg.

Multiple TP-LINK products allow a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by restoring a crafted backup file. The affected device, with the initial configuration, allows login only from the LAN port or Wi-Fi.

OS command injection vulnerability in WRC-X3000GSN v1.0.2, WRC-X3000GS v1.0.24 and earlier, and WRC-X3000GSA v1.0.24 and earlier allows a network-adjacent attacker with an administrative privilege to execute an arbitrary OS command by sending a specially crafted request to the product.

Netgear EX6120 v1.0.0.68, Netgear EX6100 v1.0.2.28, and Netgear EX3700 v1.0.0.96 are vulnerable to command injection in operating_mode.cgi via the ap_mode parameter.

OS command injection vulnerability in WRC-X5400GS-B v1.0.10 and earlier, and WRC-X5400GSA-B v1.0.10 and earlier allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

A vulnerability in the TFTP client of Zyxel GS1900 series firmware, XGS1210 series firmware, and XGS1250 series firmware, which could allow an authenticated LAN user to execute arbitrary OS commands via the GUI of the vulnerable device.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setLedCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

On the Alcatel-Lucent Enterprise (ALE) 8008 Cloud Edition Deskphone VoIP phone with firmware 1.50.13, a command injection (missing input validation) issue in the password change field for the Change Password interface allows an authenticated remote attacker in the same network to trigger OS commands via shell commands in a POST request.

On the Polycom Obihai Obi1022 VoIP phone with firmware 5.1.11, a command injection (missing input validation) issue in the NTP server IP address field for the "Time Service Settings web" interface allows an authenticated remote attacker in the same network to trigger OS commands via shell commands in a POST request.

OS command injection vulnerability in ELECOM routers (WRC-1167GST2 firmware v1.25 and prior, WRC-1167GST2A firmware v1.25 and prior, WRC-1167GST2H firmware v1.25 and prior, WRC-2533GS2-B firmware v1.52 and prior, WRC-2533GS2-W firmware v1.52 and prior, WRC-1750GS firmware v1.03 and prior, WRC-1750GSV firmware v2.11 and prior, WRC-1900GST firmware v1.03 and prior, WRC-2533GST firmware v1.03 and prior, WRC-2533GSTA firmware v1.03 and prior, WRC-2533GST2 firmware v1.25 and prior, WRC-2533GST2SP firmware v1.25 and prior, WRC-2533GST2-G firmware v1.25 and prior, and EDWRC-2533GST2 firmware v1.25 and prior) allows a network-adjacent authenticated attackers to execute an arbitrary OS command with the root privilege via unspecified vectors.

IBM Security Directory Integrator 7.2.0 through 7.2.0.13 and 10.0.0 through 10.0.3 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

OS command injection vulnerability exists in ELECOM wireless LAN routers. A specially crafted request may be sent to the affected product by a logged-in user with an administrative privilege to execute an arbitrary OS command.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to run arbitrary commands via use of a crafted string in the ping utility.

Aterm WG2600HS firmware Ver1.3.2 and earlier allows an authenticated attacker on the same network segment to execute arbitrary OS commands with root privileges via unspecified vectors.

Aterm series (Aterm WF1200C firmware Ver1.2.1 and earlier, Aterm WG1200CR firmware Ver1.2.1 and earlier, Aterm WG2600HS firmware Ver1.3.2 and earlier) allows an authenticated attacker on the same network segment to execute arbitrary OS commands with root privileges via management screen.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B".

Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker with an administrative privilege to send a specially crafted request to a specific URL, which may result in an arbitrary command execution.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.

There is a command injection vulnerability in ZTE MF258 Pro product. Due to insufficient validation of Ping Diagnosis interface parameter, an authenticated attacker could use the vulnerability to execute arbitrary commands.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

Active debug code exists in Yamaha wireless LAN access point devices. If a logged-in user who knows how to use the debug function accesses the device's management page, this function can be enabled by performing specific operations. As a result, an arbitrary OS command may be executed and/or configuration settings of the device may be altered. Affected products and versions are as follows: WLX222 firmware Rev.24.00.03 and earlier, WLX413 firmware Rev.22.00.05 and earlier, WLX212 firmware Rev.21.00.12 and earlier, WLX313 firmware Rev.18.00.12 and earlier, and WLX202 firmware Rev.16.00.18 and earlier.

An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. It contains an execute_cmd.cgi feature (that is not reachable via the web user interface) that lets an authenticated user execute Operating System commands.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetStaticRouteIPv4Settings requests to the web management portal. When parsing subelements within the StaticRouteIPv4Data element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16147.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetIPv4FirewallSettings requests to the web management portal. When parsing subelements within the IPv4FirewallRule element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16146.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in Uniview ISC 2500-S up to 20210930. Affected by this issue is the function setNatConfig of the file /Interface/DevManage/VM.php. The manipulation of the argument natAddress/natPort/natServerPort leads to os command injection. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251696. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

An issue in TOTOLINK-CX-A3002RU V1.0.4-B20171106.1512 and TOTOLINK-CX-N150RT V2.1.6-B20171121.1002 and TOTOLINK-CX-N300RT V2.1.6-B20170724.1420 and TOTOLINK-CX-N300RT V2.1.8-B20171113.1408 and TOTOLINK-CX-N300RT V2.1.8-B20191010.1107 and TOTOLINK-CX-N302RE V2.0.2-B20170511.1523 allows a remote attacker to execute arbitrary code via the /boafrm/formSysCmd component.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, and R7800 before 1.0.2.42.