D-Link DSL-7740C does not properly validate user input, which allows an authenticated LAN user to inject arbitrary command.

An issue was discovered on Spirent TestCenter and Avalanche appliance admin interface firmware. An attacker, who already has access to an SSH restricted shell, can achieve root access via shell metacharacters. The attacker can then, for example, read sensitive files such as appliance admin configuration source code. This affects Spirent TestCenter and Avalanche products which chassis version <= 5.08. The SSH restricted shell is available with default credentials.

EMC RecoverPoint versions before 4.4.1.1 and EMC RecoverPoint for Virtual Machines versions before 5.0 are affected by multiple command injection vulnerabilities where a malicious administrator with configuration privileges may bypass the user interface and escalate his privileges to root.

Pi-hole 4.4 allows a user able to write to /etc/pihole/dns-servers.conf to escalate privileges through command injection (shell metacharacters after an IP address).

sharp is an application for Node.js image processing. Prior to version 0.30.5, there is a possible vulnerability in logic that is run only at `npm install` time when installing versions of `sharp` prior to the latest v0.30.5. If an attacker has the ability to set the value of the `PKG_CONFIG_PATH` environment variable in a build environment then they might be able to use this to inject an arbitrary command at `npm install` time. This is not part of any runtime code, does not affect Windows users at all, and is unlikely to affect anyone that already cares about the security of their build environment. This problem is fixed in version 0.30.5.

An improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiSandbox version 4.4.0 through 4.4.2 and 4.2.0 through 4.2.6 and 4.0.0 through 4.0.5 and 3.2.0 through 3.2.4 and 3.0.5 through 3.0.7 may allows attacker to execute unauthorized code or commands via CLI.

FUJITSU F-12C, ARROWS Tab LTE F-01D, ARROWS Kiss F-03D, and REGZA Phone T-01D for Android allows local users to execute arbitrary commands via unspecified vectors.

Multiple OS command injection (CWE-78) vulnerabilities in the command line interface of FortiManager 6.2.7 and below, 6.4.5 and below and all versions of 6.2.x, 6.0.x and 5.6.x, FortiAnalyzer 6.2.7 and below, 6.4.5 and below and all versions of 6.2.x, 6.0.x and 5.6.x, and FortiPortal 5.2.5 and below, 5.3.5 and below and 6.0.4 and below may allow a local authenticated and unprivileged user to execute arbitrary shell commands as root via specifically crafted CLI command parameters.

IBM Security Guardium Database Activity Monitor appliance could allow a local user to inject commands that would be executed as root.

Valve Source allows local users to gain privileges by writing to the /tmp/hl2_relaunch file, which is later executed in the context of a different user account.

A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for Linux and macOS could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The PIA Linux/macOS binary openvpn_launcher.64 binary is setuid root. This binary accepts several parameters to update the system configuration. These parameters are passed to operating system commands using a "here" document. The parameters are not sanitized, which allow for arbitrary commands to be injected using shell metacharacters. A local unprivileged user can pass special crafted parameters that will be interpolated by the operating system calls.

On BIG-IP versions 16.0.x before 16.0.1.1, 15.1.x before 15.1.3, 14.1.x before 14.1.4, and 13.1.x before 13.1.4, lack of input validation for items used in the system support functionality may allow users granted either "Resource Administrator" or "Administrator" roles to execute arbitrary bash commands on BIG-IP. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Blkid in util-linux before 2.26rc-1 allows local users to execute arbitrary code.

A vulnerability in a Virtualization Manager (VMAN) related CLI command of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on the affected device. An attacker who has administrator access to an affected device could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the device with root privileges, which may lead to complete system compromise.

The installPackage function in the installerHelper subcomponent in Libmacgpg in GPG Suite before 2015.06 allows local users to execute arbitrary commands with root privileges via shell metacharacters in the xmlPath argument.

Dell PowerScale OneFS 8.1.0-9.1.0 contain an improper neutralization of special elements used in an OS command vulnerability. This vulnerability may allow an authenticated user with ISI_PRIV_LOGIN_SSH or ISI_PRIV_LOGIN_CONSOLE privileges to escalate privileges.

Sprecher SPRECON-E firmware prior to 8.64b might allow local attackers with access to engineering data to insert arbitrary code. This firmware lacks the validation of the input values on the device side, which is provided by the engineering software during parameterization. Attackers with access to local configuration files can therefore insert malicious commands that are executed after compiling them to valid parameter files (“PDLs”), transferring them to the device, and restarting the device.

The mdcheck script of the mdadm package for openSUSE 13.2 prior to version 3.3.1-5.14.1 does not properly sanitize device names, which allows local attackers to execute arbitrary commands as root.

Dell EMC PowerScale OneFS versions 8.2.x - 9.2.1.x contain an OS command injection vulnerability. This may allow a user with ISI_PRIV_LOGIN_SSH or ISI_PRIV_LOGIN_CONSOLE to escalate privileges and escape the compliance guarantees. This only impacts Smartlock WORM compliance mode clusters as a critical vulnerability and Dell recommends to update/upgrade at the earliest opportunity.

The Python console in Electrum through 2.9.4 and 3.x through 3.0.5 supports arbitrary Python code without considering (1) social-engineering attacks in which a user pastes code that they do not understand and (2) code pasted by a physically proximate attacker at an unattended workstation, which makes it easier for attackers to steal Bitcoin via hook code that runs at a later time when the wallet password has been entered, a different vulnerability than CVE-2018-1000022.

Dell EMC PowerScale OneFS versions 8.2.x - 9.1.1.x contain an improper neutralization of special elements used in an OS command. This vulnerability could allow the compadmin user to elevate privileges. This only impacts Smartlock WORM compliance mode clusters as a critical vulnerability and Dell recommends to update/upgrade at the earliest opportunity.

Privilege Escalation vulnerability in McAfee Management of Native Encryption (MNE) before 4.1.4 allows local users to gain elevated privileges via a crafted user input.

The close_connections function in /opt/cma/bin/clear_keys.pl in Sophos Web Appliance before 3.7.9.1 and 3.8 before 3.8.1.1 allows local users to gain privileges via shell metacharacters in the second argument.

Dell PowerProtect DD , versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in administrator CLI. A local high privileged attacker could potentially exploit this vulnerability, to bypass security restrictions. Exploitation may lead to a system take over by an attacker

An exploitable vulnerability exists in the verified boot protection of the CUJO Smart Firewall. It is possible to add arbitrary shell commands into the dhcpd.conf file, that persist across reboots and firmware updates, and thus allow for executing unverified commands. To trigger this vulnerability, a local attacker needs to be able to write into /config/dhcpd.conf.

A vulnerability in the upgrade process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to inject commands that could be executed with root privileges on the underlying operating system (OS). This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted upgrade package file to an affected device. A successful exploit could allow the attacker to inject commands that could be executed with root privileges on the underlying OS.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges.

GParted before 0.15.0 allows local users to execute arbitrary commands with root privileges via shell metacharacters in a crafted filesystem label.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. These vulnerabilities are due to insufficient restrictions during the execution of affected CLI commands. An attacker could exploit these vulnerabilities by leveraging the insufficient restrictions during execution of these commands. A successful exploit could allow the attacker to elevate privileges from dnasadmin and execute arbitrary commands on the underlying operating system as root.

A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root.

A vulnerability in the ROM Monitor (ROMMON) of Cisco IOS XE Software for Cisco Catalyst IE3200, IE3300, and IE3400 Rugged Series Switches, Cisco Catalyst IE3400 Heavy Duty Series Switches, and Cisco Embedded Services 3300 Series Switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of specific function arguments passed to a boot script when specific ROMMON variables are set. An attacker could exploit this vulnerability by setting malicious values for a specific ROMMON variable. A successful exploit could allow the attacker to execute unsigned code and bypass the image verification check during the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated, physical access to the device or obtain privileged access to the root shell on the device.

A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient restrictions during the execution of a specific CLI command. An attacker with administrative privileges could exploit this vulnerability by performing a command injection attack on the vulnerable command. A successful exploit could allow the attacker to access the underlying operating system as root.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to perform command injections. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating as an administrative level user within the restricted shell and submitting malicious input to a specific command. A successful exploit could allow the attacker to execute previously staged code from the underlying filesystem.

A vulnerability in the hardware initialization routines of Cisco IOS XE Software for Cisco 1100 Series Industrial Integrated Services Routers and Cisco ESR6300 Embedded Series Routers could allow an authenticated, local attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of parameters passed to a diagnostic script that is executed when the device boots up. An attacker could exploit this vulnerability by tampering with an executable file stored on a device. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need administrative level credentials (level 15) on the device.

In netdiag, there is a possible command injection due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-10, Android-11; Patch ID: ALPS05442014.

Multiple vulnerabilities in the CLI of Cisco FXOS Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute commands on the underlying operating system (OS) with root privileges. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by including crafted arguments to specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.

In netdiag, there is a possible command injection due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-10, Android-11; Patch ID: ALPS05442022.

An improper neutralization of special elements used in an os command ('OS Command Injection') vulnerability [CWE-78] in FortiManager & FortiAnalyzer version 7.4.0, version 7.2.0 through 7.2.3, version 7.0.0 through 7.0.8, version 6.4.0 through 6.4.12 and version 6.2.0 through 6.2.11 may allow a local attacker with low privileges to execute unauthorized code via specifically crafted arguments to a CLI command

A Command Execution Vulnerability exists in IBM Sterling External Authentication Server 2.2.0, 2.3.01, 2.4.0, and 2.4.1 via an unspecified OS command, which could let a local malicious user execute arbitrary code.

In manager.c in ss-manager in shadowsocks-libev 3.1.0, improper parsing allows command injection via shell metacharacters in a JSON configuration request received via 127.0.0.1 UDP traffic, related to the add_server, build_config, and construct_command_line functions.

A command injection vulnerability in install package validation subsystem of Juniper Networks Junos OS that may allow a locally authenticated attacker with privileges to execute commands with root privilege. To validate a package in Junos before installation, an administrator executes the command 'request system software add validate-on-host' via the CLI. An attacker with access to this CLI command may be able to exploit this vulnerability. This issue affects Juniper Networks Junos OS: all versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R2-S8, 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2; 20.3 versions prior to 20.3R1-S1, 20.3R2.

A command injection vulnerability in the license-check daemon of Juniper Networks Junos OS that may allow a locally authenticated attacker with low privileges to execute commands with root privilege. license-check is a daemon used to manage licenses in Junos OS. To update licenses, a user executes the command 'request system license update' via the CLI. An attacker with access to this CLI command may be able to exploit the vulnerability. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.

In mobile_log_d, there is a possible command injection due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-10, Android-11; Patch ID: ALPS05458478.

Juplink RX4-1500 v1.0.3 allows remote attackers to gain root access to the Linux subsystem via an unsanitized exec call (aka Command Line Injection), if the undocumented telnetd service is enabled and the attacker can authenticate as admin from the local network.

A privilege escalation in the EdgeSwitch prior to version 1.7.1, an CGI script don't fully sanitize the user input resulting in local commands execution, allowing an operator user (Privilege-1) to escalate privileges and became administrator (Privilege-15).

OS Command Injection vulnerability in the wirelessConnect handler of Abode iota All-In-One Security Kit allows an attacker to inject commands and gain root access. This issue affects: Abode iota All-In-One Security Kit versions prior to 1.0.2.23_6.9V_dev_t2_homekit_RF_2.0.19_s2_kvsABODE oz.