Improper access control of bootloader function was discovered in Motorola Mobility Motorola e20 prior to version RONS31.267-38-8 allows attacker with local access to read partition or RAM data.
A vulnerability in the Virtual Network Function Manager's (VNFM) logging function of Cisco Ultra Services Platform could allow an authenticated, local attacker to view sensitive data (cleartext credentials) on an affected system. More Information: CSCvd29355. Known Affected Releases: 21.0.v0.65839.
NVIDIA Security Engine contains a vulnerability in the Deterministic Random Bit Generator (DRBG) where the DRBG does not properly initialize and store or transmits sensitive data using a weakened encryption scheme that is unable to protect sensitive data which may lead to information disclosure.This issue is rated as moderate.
KNIME Server before 4.12.6 and 4.13.x before 4.13.4 (when installed in unattended mode) keeps the administrator's password in a file without appropriate file access controls, allowing all local users to read its content.
A BIOS password extraction vulnerability has been reported on certain consumer notebooks with firmware F.22 and others. The BIOS password was stored in CMOS in a way that allowed it to be extracted. This applies to consumer notebooks launched in early 2014.
Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects R6700v2 before 1.1.0.38, R6800 before 1.1.0.38, and D7000 before 1.0.1.50.
An issue was discovered in certain Apple products. iOS before 10.3 is affected. The issue involves the "Pasteboard" component. It allows physically proximate attackers to read the pasteboard by leveraging the use of an encryption key derived only from the hardware UID (rather than that UID in addition to the user passcode).
The iOS mobile application BlueCats Reveal before 5.14 stores the username and password in the app cache as base64 encoded strings, i.e. clear text. These persist in the cache even if the user logs out. This can allow an attacker to compromise the affected BlueCats network implementation. The attacker would first need to gain physical control of the iOS device or compromise it with a malicious app.
Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects R6700v2 before 1.1.0.38, R6800 before 1.1.0.38, and D7000 before 1.0.1.50.
A vulnerability has been identified in ModelSim Simulation (All versions), Questa Simulation (All versions). The RSA white-box implementation in affected applications insufficiently protects the built-in private keys that are required to decrypt electronic intellectual property (IP) data in accordance with the IEEE 1735 recommended practice. This could allow a sophisticated attacker to discover the keys, bypassing the protection intended by the IEEE 1735 recommended practice.
CloudForms stores user passwords in recoverable format
A unprotected storage of credentials in Fortinet FortiSIEM Windows Agent version 4.1.4 and below allows an authenticated user to disclosure agent password due to plaintext credential storage in log files
IBM Cognos Analytics 11.0 could store cached credentials locally that could be obtained by a local user. IBM X-Force ID: 136824.
Vulnerability in Hathway Skyworth Router CM5100 v.4.1.1.24 allows a physically proximate attacker to obtain user credentials via SPI flash Firmware W25Q64JV.
The Android mobile application BlueCats Reveal before 3.0.19 stores the username and password in a clear text file. This file persists until the user logs out or the session times out from non-usage (30 days of no user activity). This can allow an attacker to compromise the affected BlueCats network implementation. The attacker would first need to gain physical control of the Android device or compromise it with a malicious app.
IBM BigFix Compliance Analytics 1.9.79 (TEMA SUAv1 SCA SCM) stores user credentials in clear text which can be read by a local user. IBM X-Force ID: 123676.
IBM Watson Studio Local 1.2.3 stores key files in the user's home directory which could be obtained by another local user. IBM X-Force ID: 161413.
Cloud Foundry CredHub CLI, versions prior to 2.2.1, inadvertently writes authentication credentials provided via environment variables to its persistent config file. A local authenticated malicious user with access to the CredHub CLI config file can use these credentials to retrieve and modify credentials stored in CredHub that are authorized to the targeted user.
IBM Spectrum Protect Plus 10.1.2 may display the vSnap CIFS password in the IBM Spectrum Protect Plus Joblog. This can result in an attacker gaining access to sensitive information as well as vSnap. IBM X-Force ID: 162173.
IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a locally authenticated user. IBM X-Force ID: 208154.
Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, and other configuration options in the file generated via the "export configuration" feature. The configuration file is encrypted using the awenc binary. The same binary can be used to decrypt any configuration file since all the encryption logic is hard coded. A local attacker can use this vulnerability to gain access to devices username and passwords.
IBM QRadar SIEM 7.3.0 through 7.3.3 uses weak credential storage in some instances which could be decrypted by a local attacker. IBM X-Force ID: 164429.
IBM Security Guardium Big Data Intelligence (SonarG) 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 160987.
Claws Mail vCalendar plugin: credentials exposed on interface
Dell EMC Avamar Server version 19.4 contains a plain-text password storage vulnerability in AvInstaller. A local attacker could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account.
Credentials to access device configuration information stored unencrypted in flash memory. These credentials would allow read-only access to network configuration information and terminal configuration data.
An information disclosure vulnerability [CWE-200] in FortiAnalyzerVM and FortiManagerVM versions 7.0.0 and 6.4.6 and below may allow an authenticated attacker to read the FortiCloud credentials which were used to activate the trial license in cleartext.
In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.9 a form contains a password field with autocomplete enabled. The stored credentials can be captured by an attacker who gains control over the user's computer. Therefore the user must have logged in at least once.
A vulnerability in the CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, local attacker to access sensitive information stored on the underlying file system of an affected system. This vulnerability exists because sensitive information is not sufficiently secured when it is stored. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the affected system.
Insufficiently protected credentials in USB provisioning for Intel(R) AMT SDK before version 16.0.3, Intel(R) SCS before version 12.2 and Intel(R) MEBx before versions 11.0.0.0012, 12.0.0.0011, 14.0.0.0004 and 15.0.0.0004 may allow an unauthenticated user to potentially enable information disclosure via physical access.
Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.
GGLocker iOS application, contains an insecure data storage of the password hash value which results in an authentication bypass.
Users with appropriate file access may be able to access unencrypted user credentials saved by MongoDB Extension for VS Code in a binary file. These credentials may be used by malicious attackers to perform unauthorized actions. This vulnerability affects all MongoDB Extension for VS Code including and prior to version 0.7.0
IBM MQ Advanced Cloud Pak (IBM Cloud Private 1.0.0 through 3.0.1) stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 159465.
Unprotected Storage of Credentials vulnerability in McAfee Advanced Threat Defense (ATD) prior to 4.8 allows local attacker to gain access to the root password via accessing sensitive files on the system. This was originally published with a CVSS rating of High, further investigation has resulted in this being updated to Critical. The root password is common across all instances of ATD prior to 4.8. See the Security bulletin for further details
An issue was discovered in PRTG 7.x through 19.4.53. Due to insufficient access control on local registry keys for the Core Server Service, a non-administrative user on the local machine is able to access administrative credentials.
MySQL-GUI-tools (mysql-administrator) leaks passwords into process list after with launch of mysql text console
Alt-N Technologies Mdaemon 5.0 through 5.0.6 uses a weak encryption algorithm to store user passwords, which allows local users to crack passwords.
IBM Spectrum Protect 7.1 and 8.1 (formerly Tivoli Storage Manager) disclosed unencrypted login credentials to Vmware vCenter in the application trace output which could be obtained by a local user. IBM X-Force ID: 126875.
CF CLI version prior to v6.45.0 (bosh release version 1.16.0) writes the client id and secret to its config file when the user authenticates with --client-credentials flag. A local authenticated malicious user with access to the CF CLI config file can act as that client, who is the owner of the leaked credentials.
An attacker with physical access to the host can extract the secrets from the registry and create valid JWT tokens for the Fresenius Kabi Vigilant MasterMed version 2.0.1.3 application and impersonate arbitrary users. An attacker could manipulate RabbitMQ queues and messages by impersonating users.
IBM Security Identity Manager Adapters 6.0 and 7.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 126801.
IBM UrbanCode Deploy (UCD) 7.0.4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 171250.
IBM BigFix Platform 9.5 - 9.5.9 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 123910.
A password storage vulnerability exists in the operating system functionality of Moxa EDR-810 V4.1 build 17030317. An attacker with shell access could extract passwords in clear text from the device.
IBM WebSphere Message Broker stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 123777.
IBM Security Guardium Data Encryption (GDE) 3.0.0.2 stores user credentials in plain in clear text which can be read by a local privileged user. IBM X-Force ID: 171831.
IBM Security Guardium 11.2 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 195770.
In Versa Director, Versa Analytics and VOS, Passwords are not hashed using an adaptive cryptographic hash function or key derivation function prior to storage. Popular hashing algorithms based on the Merkle-Damgardconstruction (such as MD5 and SHA-1) alone are insufficient in thwarting password cracking. Attackers can generate and use precomputed hashes for all possible password character combinations (commonly referred to as "rainbow tables") relatively quickly. The use of adaptive hashing algorithms such asscryptorbcryptor Key-Derivation Functions (i.e.PBKDF2) to hash passwords make generation of such rainbow tables computationally infeasible.
A vulnerability in the installer software of Cisco ThousandEyes Recorder could allow an unauthenticated, local attacker to access sensitive information that is contained in the ThousandEyes Recorder installer software. This vulnerability exists because sensitive information is included in the application installer. An attacker could exploit this vulnerability by downloading the installer and extracting its contents. A successful exploit could allow the attacker to access sensitive information that is included in the application installer.