Some HTTP/2 implementations are vulnerable to a flood of empty frames, potentially leading to a denial of service. The attacker sends a stream of frames with an empty payload and without the end-of-stream flag. These frames can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends time processing each frame disproportionate to attack bandwidth. This can consume excess CPU.
An issue in the Instructor Appointment Availability module of eSoft Planner 3.24.08271-USA allows attackers to cause a Denial of Service (DoS) via a crafted POST request.
All versions of package asneg/opcuastack are vulnerable to Denial of Service (DoS) due to a missing limitation on the number of received chunks - per single session or in total for all concurrent sessions. An attacker can exploit this vulnerability by sending an unlimited number of huge chunks (e.g. 2GB each) without sending the Final closing chunk.
A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled.
In api.rb in Sidekiq before 5.2.10 and 6.4.0, there is no limit on the number of days when requesting stats for the graph. This overloads the system, affecting the Web UI, and makes it unavailable to users.
Specific IPv6 DHCP packets received by the jdhcpd daemon will cause a memory resource consumption issue to occur on a Junos OS device using the jdhcpd daemon configured to respond to IPv6 requests. Once started, memory consumption will eventually impact any IPv4 or IPv6 request serviced by the jdhcpd daemon, thus creating a Denial of Service (DoS) condition to clients requesting and not receiving IP addresses. Additionally, some clients which were previously holding IPv6 addresses will not have their IPv6 Identity Association (IA) address and network tables agreed upon by the jdhcpd daemon after the failover event occurs, which leads to more than one interface, and multiple IP addresses, being denied on the client. Affected releases are Juniper Networks Junos OS: 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2.
Joomla! 1.03 does not restrict the number of "Search" Mambots, which allows remote attackers to cause a denial of service (resource consumption) via a large number of Search Mambots.
An issue was discovered in ebankIT before 7. A Denial-of-Service attack is possible through the GET parameter EStatementsIds located on the /Controls/Generic/EBMK/Handlers/EStatements/DownloadEStatement.ashx endpoint. The GET parameter accepts over 100 comma-separated e-statement IDs without throwing an error. When this many IDs are supplied, the server takes around 60 seconds to respond and successfully generate the expected ZIP archive (during this time period, no other pages load). A threat actor could issue a request to this endpoint with 100+ statement IDs every 30 seconds, potentially resulting in an overload of the server for all users.
FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.5.1, a malicious server can crash the FreeRDP client by sending invalid huge allocation size. Version 3.5.1 contains a patch for the issue. No known workarounds are available.
In Apache ActiveMQ Artemis prior to 2.20.0 or 2.19.1, an attacker could partially disrupt availability (DoS) through uncontrolled resource consumption of memory.
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536).
libp2p-rust is the official rust language Implementation of the libp2p networking stack. In versions prior to 0.45.1 an attacker node can cause a victim node to allocate a large number of small memory chunks, which can ultimately lead to the victim’s process running out of memory and thus getting killed by its operating system. When executed continuously, this can lead to a denial of service attack, especially relevant on a larger scale when run against more than one node of a libp2p based network. Users are advised to upgrade to `libp2p` `v0.45.1` or above. Users unable to upgrade should reference the DoS Mitigation page for more information on how to incorporate mitigation strategies, monitor their application, and respond to attacks: https://docs.libp2p.io/reference/dos-mitigation/.
js-libp2p is the official javascript Implementation of libp2p networking stack. Versions older than `v0.38.0` of js-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of js-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to update their js-libp2p dependency to `v0.38.0` or greater. There are no known workarounds for this vulnerability.
rizin before Release v0.6.3 is vulnerable to Uncontrolled Resource Consumption via bin_pe_parse_imports, Pe_r_bin_pe_parse_var, and estimate_slide.
Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.
TiKV 6.1.2 allows remote attackers to cause a denial of service (fatal error, with RpcStatus UNAVAILABLE for "not leader") upon an attempt to start a node in a situation where the context deadline is exceeded
IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS and 9.3 CD, in certain configurations, is vulnerable to a denial of service attack caused by an error processing messages when an API Exit using MQBUFMH is used. IBM X-Force ID: 290259.
go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.
Varnish Cache before 7.3.2 and 7.4.x before 7.4.3 (and before 6.0.13 LTS), and Varnish Enterprise 6 before 6.0.12r6, allows credits exhaustion for an HTTP/2 connection control flow window, aka a Broke Window Attack.
The LevelOne WBR-6012 router with firmware R0.40e6 is vulnerable to improper resource allocation within its web application, where a series of crafted HTTP requests can cause a reboot. This could lead to network service interruptions.
Some HTTP/2 implementations are vulnerable to a settings flood, potentially leading to a denial of service. The attacker sends a stream of SETTINGS frames to the peer. Since the RFC requires that the peer reply with one acknowledgement per SETTINGS frame, an empty SETTINGS frame is almost equivalent in behavior to a ping. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.
Pexip Infinity before 27.0 has improper WebRTC input validation. An unauthenticated remote attacker can use excessive resources, temporarily causing denial of service.
VSeeFace through 1.13.38.c2 allows attackers to cause a denial of service (application hang) via a spoofed UDP packet containing at least 10 digits in JSON data.
An issue was discovered in 3S-Smart CODESYS V3 products. A crafted communication request may cause uncontrolled memory allocations in the affected CODESYS products and may result in a denial-of-service condition. All variants of the following CODESYS V3 products in all versions prior to v3.5.14.20 that contain the CmpGateway component are affected, regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control V3 Runtime System Toolkit, CODESYS Gateway V3, CODESYS V3 Development System.
ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.
Opencast is free and open source software for automated video capture and distribution. First noticed in Opencast 13 and 14, Opencast's Elasticsearch integration may generate syntactically invalid Elasticsearch queries in relation to previously acceptable search queries. From Opencast version 11.4 and newer, Elasticsearch queries are retried a configurable number of times in the case of error to handle temporary losses of connection to Elasticsearch. These invalid queries would fail, causing the retry mechanism to begin requerying with the same syntactically invalid query immediately, in an infinite loop. This causes a massive increase in log size which can in some cases cause a denial of service due to disk exhaustion. Opencast 13.10 and Opencast 14.3 contain patches which address the base issue, with Opencast 16.7 containing changes which harmonize the search behaviour between the admin UI and external API. Users are strongly recommended to upgrade as soon as possible if running versions prior to 13.10 or 14.3. While the relevant endpoints require (by default) `ROLE_ADMIN` or `ROLE_API_SERIES_VIEW`, the problem queries are otherwise innocuous. This issue could be easily triggered by normal administrative work on an affected Opencast system. Those who run a version newer than 13.10 and 14.3 and see different results when searching in their admin UI vs your external API or LMS, may resolve the issue by upgrading to 16.7. No known workarounds for the vulnerability are available.
Keep-alive HTTP and HTTPS connections can remain open and inactive for up to 2 minutes in Node.js 6.16.0 and earlier. Node.js 8.0.0 introduced a dedicated server.keepAliveTimeout which defaults to 5 seconds. The behavior in Node.js 6.16.0 and earlier is a potential Denial of Service (DoS) attack vector. Node.js 6.17.0 introduces server.keepAliveTimeout and the 5-second default.
In Spring Cloud Function versions prior to 3.2.6, it is possible for a user who directly interacts with framework provided lookup functionality to cause a denial-of-service condition due to the caching issue in the Function Catalog component of the framework.
Cosign provides code signing and transparency for containers and binaries. Prior to version 2.2.4, maliciously-crafted software artifacts can cause denial of service of the machine running Cosign thereby impacting all services on the machine. The root cause is that Cosign creates slices based on the number of signatures, manifests or attestations in untrusted artifacts. As such, the untrusted artifact can control the amount of memory that Cosign allocates. The exact issue is Cosign allocates excessive memory on the lines that creates a slice of the same length as the manifests. Version 2.2.4 contains a patch for the vulnerability.
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4.
An Environment (CWE-2) vulnerability exists in SoMachine Basic, all versions, and Modicon M221(all references, all versions prior to firmware V1.10.0.0) which could cause cycle time impact when flooding the M221 ethernet interface while the Ethernet/IP adapter is activated.
A Missing Authentication for Critical Function vulnerability in spacewalk-java of SUSE Manager Server 4.1, SUSE Manager Server 4.2 allows remote attackers to easily exhaust available disk resources leading to DoS. This issue affects: SUSE Manager Server 4.1 spacewalk-java versions prior to 4.1.46. SUSE Manager Server 4.2 spacewalk-java versions prior to 4.2.37.
Synapse is an open-source Matrix homeserver. Synapse versions before 1.106 are vulnerable to a disk fill attack, where an unauthenticated adversary can induce Synapse to download and cache large amounts of remote media. The default rate limit strategy is insufficient to mitigate this. This can lead to a denial of service, ranging from further media uploads/downloads failing to completely unavailability of the Synapse process, depending on how Synapse was deployed. Synapse 1.106 introduces a new "leaky bucket" rate limit on remote media downloads to reduce the amount of data a user can request at a time. This does not fully address the issue, but does limit an unauthenticated user's ability to request large amounts of data to be cached.
A vulnerability in SonicOS CFS (Content filtering service) returns a large 403 forbidden HTTP response message to the source address when users try to access prohibited resource this allows an attacker to cause HTTP Denial of Service (DoS) attack
An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). In specific cases the state of TCP sessions that are terminated is not cleared, which over time leads to an exhaustion of resources, preventing new connections to the control plane from being established. A continuously increasing number of connections shown by: user@host > show system connections is indicative of the problem. To recover the respective RE needs to be restarted manually. This issue only affects IPv4 but does not affect IPv6. This issue only affects TCP sessions established in-band (over an interface on an FPC) but not out-of-band (over the management ethernet port on the routing-engine). This issue affects Junos OS Evolved: * All versions before 21.4R3-S9-EVO, * 22.2 versions before 22.2R3-S4-EVO, * 22.4 version before 22.4R3-S3-EVO, * 23.2 versions before 23.2R2-S1-EVO, * 23.4 versions before 23.4R2-EVO.
An Insufficient Algorithmic Complexity combined with an Allocation of Resources Without Limits or Throttling vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series and MX Series with SPC3 allows an unauthenticated network attacker to cause latency in transit packet processing and even packet loss. If transit traffic includes a significant percentage (> 5%) of fragmented packets which need to be reassembled, high latency or packet drops might be observed. This issue affects Juniper Networks Junos OS on SRX Series, MX Series with SPC3: All versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2-S9, 18.4R3; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R1-S1, 19.2R2.
Similarly to CVE-2024-34055, Apache James is vulnerable to denial of service through the abuse of IMAP literals from both authenticated and unauthenticated users, which could be used to cause unbounded memory allocation and very long computations Version 3.7.6 and 3.8.2 restrict such illegitimate use of IMAP literals.
An Allocation of Resources Without Limits or Throttling vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved allows unauthenticated network based attacker to cause a Denial of Service (DoS). On all Junos Evolved platforms hostbound protocols will be impacted by a high rate of specific hostbound traffic from ports on a PFE. Continued receipt of this amount of traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS Evolved: 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 21.2R1.
IBM WebSphere Application Server 8.5, 9.0 and IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 are vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 281516.
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.3, excessive memory use during pgsql parsing could lead to OOM-related crashes. This vulnerability is patched in 7.0.3. As workaround, users can disable the pgsql app layer parser.
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 6.0.16 and 7.0.3, an attacker can craft traffic to cause Suricata to use far more CPU and memory for processing the traffic than needed, which can lead to extreme slow downs and denial of service. This vulnerability is patched in 6.0.16 or 7.0.3. Workarounds include disabling the affected protocol app-layer parser in the yaml and reducing the `stream.reassembly.depth` value helps reduce the severity of the issue.
Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 22.2.0, Twisted SSH client and server implement is able to accept an infinite amount of data for the peer's SSH version identifier. This ends up with a buffer using all the available memory. The attach is a simple as `nc -rv localhost 22 < /dev/zero`. A patch is available in version 22.2.0. There are currently no known workarounds.
In lunary-ai/lunary version 1.2.7, there is a lack of rate limiting on the forgot password page, leading to an email bombing vulnerability. Attackers can exploit this by automating forgot password requests to flood targeted user accounts with a high volume of password reset emails. This not only overwhelms the victim's mailbox, making it difficult to manage and locate legitimate emails, but also significantly impacts mail servers by consuming their resources. The increased load can cause performance degradation and, in severe cases, make the mail servers unresponsive or unavailable, disrupting email services for the entire organization.
Fastify node module before 0.38.0 is vulnerable to a denial-of-service attack by sending a request with "Content-Type: application/json" and a very large payload.
A limitless resource allocation vulnerability in FPC resources of Juniper Networks Junos OS Evolved on PTX Series allows an unprivileged attacker to cause Denial of Service (DoS). Continuously polling the SNMP jnxCosQstatTable causes the FPC to run out of GUID space, causing a Denial of Service to the FPC resources. When the FPC runs out of the GUID space, you will see the following syslog messages. The evo-aftmand-bt process is asserting. fpc1 evo-aftmand-bt[17556]: %USER-3: get_next_guid: Ran out of Guid Space start 1748051689472 end 1752346656767 fpc1 audit[17556]: %AUTH-5: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 kernel: %KERN-5: audit: type=1701 audit(1648567505.119:57): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 emfd-fpa[14438]: %USER-5: Alarm set: APP color=red, class=CHASSIS, reason=Application evo-aftmand-bt fail on node Fpc1 fpc1 emfd-fpa[14438]: %USER-3-EMF_FPA_ALARM_REP: RaiseAlarm: Alarm(Location: /Chassis[0]/Fpc[1] Module: sysman Object: evo-aftmand-bt:0 Error: 2) reported fpc1 sysepochman[12738]: %USER-5-SYSTEM_REBOOT_EVENT: Reboot [node] [ungraceful reboot] [evo-aftmand-bt exited] The FPC resources can be monitored using the following commands: user@router> start shell [vrf:none] user@router-re0:~$ cli -c "show platform application-info allocations app evo-aftmand-bt" | grep ^fpc | grep -v Route | grep -i -v Nexthop | awk '{total[$1] += $5} END { for (key in total) { print key " " total[key]/4294967296 }}' Once the FPCs become unreachable they must be manually restarted as they do not self-recover. This issue affects Juniper Networks Junos OS Evolved on PTX Series: All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO.
client_golang is the instrumentation library for Go applications in Prometheus, and the promhttp package in client_golang provides tooling around HTTP servers and clients. In client_golang prior to version 1.11.1, HTTP server is susceptible to a Denial of Service through unbounded cardinality, and potential memory exhaustion, when handling requests with non-standard HTTP methods. In order to be affected, an instrumented software must use any of `promhttp.InstrumentHandler*` middleware except `RequestsInFlight`; not filter any specific methods (e.g GET) before middleware; pass metric with `method` label name to our middleware; and not have any firewall/LB/proxy that filters away requests with unknown `method`. client_golang version 1.11.1 contains a patch for this issue. Several workarounds are available, including removing the `method` label name from counter/gauge used in the InstrumentHandler; turning off affected promhttp handlers; adding custom middleware before promhttp handler that will sanitize the request method given by Go http.Request; and using a reverse proxy or web application firewall, configured to only allow a limited set of methods.
NVIDIA FLARE contains a vulnerability in the admin interface, where an un-authorized attacker can cause Allocation of Resources Without Limits or Throttling, which may lead to cause system unavailable.
Uncontrolled resource consumption refers to a software vulnerability where a attacker or system uses excessive resources, such as CPU, memory, or network bandwidth, without proper limitations or controls. This can cause a denial-of-service (DoS) attack or degrade the performance of the affected system.
In JetBrains TeamCity before 2024.03.2 server was susceptible to DoS attacks with incorrect auth tokens
A vulnerability in the Snort detection engine integration for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause unlimited memory consumption, which could lead to a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient memory management for certain Snort events. An attacker could exploit this vulnerability by sending a series of crafted IP packets that would generate specific Snort events on an affected device. A sustained attack could cause an out of memory condition on the affected device. A successful exploit could allow the attacker to interrupt all traffic flowing through the affected device. In some circumstances, the attacker may be able to cause the device to reload, resulting in a DoS condition.