backupsettings.html in the web administrative portal in Zhone zNID GPON 2426A before S3.0.501 places a session key in a URL, which allows remote attackers to obtain arbitrary user passwords via the sessionKey parameter in a getConfig action to backupsettings.conf.

Computrols CBAS 18.0.0 allows Authenticated Command Injection.

A vulnerability was detected in Totolink NR1800X 9.1.0u.6279_B20210910. This affects the function sub_41A68C of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument setUssd results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used.

A Command Injection vulnerability exists in the web-based GUI of the 1st Gen PelcoSarix Enhanced Camera that could allow a remote attacker to execute arbitrary commands.

A Command Injection vulnerability exists in the web-based GUI of the 1st Gen Pelco Sarix Enhanced Camera that could allow a remote attacker to execute arbitrary commands.

A vulnerability, which was classified as critical, has been found in TRENDnet TEW-652BRP 3.04B01. This issue affects some unknown processing of the file get_set.ccp of the component Web Management Interface. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-219935.

The version control adapters component of TIBCO Data Virtualization (formerly known as Cisco Information Server) contains vulnerabilities that may allow for arbitrary command execution. Affected releases are TIBCO Data Virtualization: 7.0.5; 7.0.6.

On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

The Sophos Web Appliance (version 4.2.1.3) is vulnerable to two Remote Command Injection vulnerabilities affecting its web administrative interface. These vulnerabilities occur in the MgrReport.php (/controllers/MgrReport.php) component responsible for blocking and unblocking IP addresses from accessing the device. The device doesn't properly escape the information passed in the variables 'unblockip' and 'blockip' before calling the shell_exec() function which allows for system commands to be injected into the device. The code erroneously suggests that the information handled is protected by utilizing the variable name 'escapedips' - however this was not the case. The Sophos ID is NSWA-1258.

Huawei iManager NetEco with software V600R008C00 and V600R008C10 has a command injection vulnerability. An authenticated, remote attacker could exploit this vulnerability to send malicious packets to a target device. Successful exploit could enable a low privileged user to execute commands that a high privileged user could execute, causing the files to be tampered with or deleted.

A command-injection vulnerability exists in a web application on a custom-built GoAhead web server used on Foscam, Vstarcam, and multiple white-label IP camera models. The mail-sending form in the mail.htm page allows an attacker to inject a command into the receiver1 field in the form; it will be executed with root privileges.

Command Injection vulnerability in the web interface in McAfee Advanced Threat Defense (ATD) 3.10, 3.8, 3.6, 3.4 allows remote authenticated users to execute a command of their choice via a crafted HTTP request parameter.

A Remote Arbitrary Code Execution vulnerability in HPE Smart Storage Administrator version before v2.60.18.0 was found.

An exploitable command execution vulnerability exists in Information Builders WebFOCUS Business Intelligence Portal 8.1 . A specially crafted web parameter can cause a command injection. An authenticated attacker can send a crafted web request to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during a password change resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters resulting in command injection during the boot process. To trigger this vulnerability, an attacker needs to send an HTTP request and reboot the device.

Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 allow Hayes AT command injection.

IBM Security QRadar SIEM 7.1.x and 7.2.x before 7.2.7 allows remote authenticated users to execute arbitrary OS commands as root via unspecified vectors.

Command injection vulnerability in smart.cgi in Synology DiskStation Manager (DSM) before 5.2-5967-5 allows remote authenticated users to execute arbitrary commands via disk field.

Sourcetree for macOS had several argument and command injection bugs in Mercurial and Git repository handling. An attacker with permission to commit to a repository linked in Sourcetree for macOS is able to exploit this issue to gain code execution on the system. From version 1.4.0 of Sourcetree for macOS, this vulnerability can be triggered from a webpage through the use of the Sourcetree URI handler. Versions of Sourcetree for macOS starting with 1.0b2 before version 2.7.0 are affected by this vulnerability.

Synology Photo Station before 6.3-2958 allows remote authenticated guest users to execute arbitrary commands via shell metacharacters in the X-Forwarded-For HTTP header to photo/login.php.

IBM Rational Quality Manager (RQM) and Rational Collaborative Lifecycle Management 3.0.1.6 before iFix8, 4.x before 4.0.7 iFix11, 5.x before 5.0.2 iFix17, and 6.x before 6.0.1 ifix3 allow remote authenticated users to execute arbitrary OS commands via a crafted "HTML request."

General Electric (GE) Industrial Solutions UPS SNMP/Web Adapter devices with firmware before 4.8 allow remote authenticated users to execute arbitrary commands via unspecified vectors.

Proxy command injection vulnerabilities in Trend Micro Mobile Security (Enterprise) versions before 9.7 Patch 3 allow remote attackers to execute arbitrary code on vulnerable installations.

IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.

The Management Interface in Citrix NetScaler Application Delivery Controller (ADC) and NetScaler Gateway 10.1 before 10.1.132.8, 10.5 before Build 56.15, and 10.5.e before Build 56.1505.e allows remote authenticated users to execute arbitrary shell commands via shell metacharacters in the filter parameter to rapi/ipsec_logs.

Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "t" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4744.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.12. Affected by this issue is the function SessionController of the file /isomp-protocol/protocol/session of the component SSH Protocol Handler. The manipulation of the argument keypassword leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

The xmlrpc.cgi Webmin script in IBM QRadar SIEM 7.1 MR2 before Patch 11 IF02 and 7.2.x before 7.2.5 Patch 4 allows remote authenticated users to execute arbitrary commands with root privileges via unspecified vectors.

The web interface packet capture management component in Palo Alto Networks PAN-OS before 6.1.19, 7.0.x before 7.0.19, 7.1.x before 7.1.14, and 8.0.x before 8.0.6 allows remote authenticated users to execute arbitrary code via unspecified vectors.

A security vulnerability has been detected in GL.iNet GL-MT3000 up to 4.4.5. Affected by this vulnerability is an unknown functionality of the file /usr/bin/one_click_upgrade of the component Online Firmware Upgrade Handler. Such manipulation leads to command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 4.7 addresses this issue. Upgrading the affected component is advised. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

Ansible before version 2.2.0 fails to properly sanitize fact variables sent from the Ansible controller. An attacker with the ability to create special variables on the controller could execute arbitrary commands on Ansible clients as the user Ansible runs as.

A weakness has been identified in GL.iNet GL-MT3000 up to 4.4.5. Affected is the function replace_country in the library /usr/lib/oui-httpd/rpc/tor of the component Tor Proxy Service Configuration Handler. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 4.7 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

A security flaw has been discovered in Tenda F451 1.0.0.7/1.0.0.9. Impacted is the function formWriteFacMac of the file /goform/WriteFacMac of the component Web Management Interface. Performing a manipulation of the argument mac results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.

Command injection vulnerability in Junos Space before 15.2R2 allows attackers to execute arbitrary code as a root user.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

The safe_eval function in trytond in Tryton before 2.4.15, 2.6.x before 2.6.14, 2.8.x before 2.8.11, 3.0.x before 3.0.7, and 3.2.x before 3.2.3 allows remote authenticated users to execute arbitrary commands via shell metacharacters in (1) the collection.domain in the webdav module or (2) the formula field in the price_list module.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker could exploit this vulnerability by uploading a crafted file to the web UI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands with root privileges on the device.

In Citrix XenMobile Server through 10.12 RP9, there is an Authenticated Command Injection vulnerability, leading to remote code execution with root privileges.

xymond in Xymon 4.1.x, 4.2.x, and 4.3.x before 4.3.25 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the adduser_name argument in (1) web/useradm.c or (2) web/chpasswd.c.

flu.cgi in the web interface on SysLINK SL-1000 Machine-to-Machine (M2M) Modular Gateway devices with firmware before 01A.8 allows remote authenticated users to execute arbitrary commands via the 5066 (aka dnsmasq) parameter.

An OS command injection vulnerability in the web administration component of Micro Focus Secure Messaging Gateway (SMG) allows a remote attacker authenticated as a privileged user to execute arbitrary OS commands on the SMG server. This can be exploited in conjunction with CVE-2018-12464 to achieve unauthenticated remote code execution. Affects Micro Focus Secure Messaging Gateway versions prior to 471. It does not affect previous versions of the product that used GWAVA product name (i.e. GWAVA 6.5).

A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Wifi-soft UniBox Controller up to 20250506. Affected by this vulnerability is an unknown functionality of the file /authentication/logout.php. The manipulation of the argument mac_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Identity Manager (ISIM) Virtual Appliance 7.0.0.0 through 7.0.1.0 before 7.0.1-ISS-SIM-FP0001 allows remote authenticated users to execute arbitrary code with administrator privileges via unspecified vectors. IBM X-Force ID: 111640.

The devtools.sh script in AXIS network cameras allows remote authenticated users to execute arbitrary commands via shell metacharacters in the app parameter to (1) app_license.shtml, (2) app_license_custom.shtml, (3) app_index.shtml, or (4) app_params.shtml.

Unquoted executable path vulnerability in Client Management and Gateway components in McAfee (now Intel Security) ePO Deep Command (eDC) 2.2 and 2.1 allows authenticated users to execute a command of their choice via dropping a malicious file for the path.

Multiple authenticated remote code execution vulnerabilities were discovered in the AOS-CX command line interface in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.06.xxxx: 10.06.0170 and below, AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below. Aruba has released upgrades for Aruba AOS-CX devices that address these security vulnerabilities.