KubeOperator is an open source Kubernetes distribution focused on helping enterprises plan, deploy and operate production-level K8s clusters. In KubeOperator versions 3.16.3 and below, API interfaces with unauthorized entities and can leak sensitive information. This vulnerability could be used to take over the cluster under certain conditions. This issue has been patched in version 3.16.4.

The Icons Factory plugin for WordPress is vulnerable to Arbitrary File Deletion due to insufficient authorization and improper path validation within the delete_files() function in all versions up to, and including, 1.6.12. This makes it possible for unauthenticated attackers to to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php).

All versions of Confluence Data Center and Server are affected by this unexploited vulnerability. This Improper Authorization vulnerability allows an unauthenticated attacker to reset Confluence and create a Confluence instance administrator account. Using this account, an attacker can then perform all administrative actions that are available to Confluence instance administrator leading to - but not limited to - full loss of confidentiality, integrity and availability.  Atlassian Cloud sites are not affected by this vulnerability. If your Confluence site is accessed via an atlassian.net domain, it is hosted by Atlassian and is not vulnerable to this issue.

A vulnerability was found in SourceCodester Service Provider Management System 1.0 and classified as critical. Affected by this issue is some unknown functionality of the file /classes/Master.php?f=delete_inquiry. The manipulation leads to improper authorization. The attack may be launched remotely. The identifier of this vulnerability is VDB-227588.

Incorrect Authorization vulnerability in Micro Focus Container Deployment Foundation component affects products: - Hybrid Cloud Management. Versions 2018.05 to 2019.11. - ArcSight Investigate. versions 2.4.0, 3.0.0 and 3.1.0. - ArcSight Transformation Hub. versions 3.0.0, 3.1.0, 3.2.0. - ArcSight Interset. version 6.0.0. - ArcSight ESM (when ArcSight Fusion 1.0 is installed). version 7.2.1. - Service Management Automation (SMA). versions 2018.05 to 2020.02 - Operation Bridge Suite (Containerized). Versions 2018.05 to 2020.02. - Network Operation Management. versions 2017.11 to 2019.11. - Data Center Automation Containerized. versions 2018.05 to 2019.11 - Identity Intelligence. versions 1.1.0 and 1.1.1. The vulnerability could be exploited to provide unauthorized access to the Container Deployment Foundation.

Canonical snapd before version 2.37.1 incorrectly performed socket owner validation, allowing an attacker to run arbitrary commands as root. This issue affects: Canonical snapd versions prior to 2.37.1.

Apache Solr versions 6.6.0 to 6.6.6, 7.0.0 to 7.7.3 and 8.0.0 to 8.6.2 prevents some features considered dangerous (which could be used for remote code execution) to be configured in a ConfigSet that's uploaded via API without authentication/authorization. The checks in place to prevent such features can be circumvented by using a combination of UPLOAD/CREATE actions.

This improper access control vulnerability allows remote attackers to gain unauthorized access to the system. To fix these vulnerabilities, QNAP recommend updating Photo Station to their latest versions.

Incorrect Authorization vulnerability exists in EcoStruxure Control Expert (all versions prior to 14.1 Hot Fix), Unity Pro (all versions), Modicon M340 (all versions prior to V3.20) , and Modicon M580 (all versions prior to V3.10), which could cause a bypass of the authentication process between EcoStruxure Control Expert and the M340 and M580 controllers.

A vulnerability in SonicWall Email Security appliance allow an unauthenticated user to perform remote code execution. This vulnerability affected Email Security Appliance version 10.0.2 and earlier.

In Delta Electronics InfraSuite Device Master versions prior to 1.0.5, an unauthenticated attacker could generate a valid token, which would lead to authentication bypass.

V-SOL GPON/EPON OLT Platform v2.03 contains a privilege escalation vulnerability that allows normal users to gain administrative access by manipulating the user role parameter. Attackers can send a crafted HTTP POST request to the user management endpoint with 'user_role_mod' set to integer value '1' to elevate their privileges.

A flaw was found in APICast, when 3Scale's OIDC module does not properly evaluate the response to a mismatched token from a separate realm. This could allow a separate realm to be accessible to an attacker, permitting access to unauthorized information.

4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.

A security flaw has been discovered in rymcu forest up to de53ce79db9faa2efc4e79ce1077a302c42a1224. Impacted is the function getAll/addDic/getAllDic/deleteDic of the file src/main/java/com/rymcu/forest/lucene/api/UserDicController.java. The manipulation results in missing authorization. The attack may be launched remotely. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases.

There is a Permission Control Vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause certain codes to be executed.

AxiomSL's Axiom java applet module (used for editing uploaded Excel files and associated Java RMI services) 9.5.3 and earlier allows remote attackers to (1) access data of other basic users through arbitrary SQL commands, (2) perform a horizontal and vertical privilege escalation, (3) cause a Denial of Service on global application, or (4) write/read/delete arbitrary files on server hosting the application.

Nexxt Nebula 1200-AC 15.03.06.60 allows authentication bypass and command execution by using the HTTPD service to enable TELNET.

On STMicroelectronics STM32L0, STM32L1, STM32L4, STM32F4, STM32F7, and STM32H7 devices, Proprietary Code Read Out Protection (PCROP) (a software IP protection method) can be defeated by observing CPU registers and the effect of code/instruction execution.

An issue was discovered in Inductive Automation Ignition before 7.9.20 and 8.x before 8.1.17. Designer and Vision Client Session IDs are mishandled. An attacker can determine which session IDs were generated in the past and then hijack sessions assigned to these IDs via Randy.

A vulnerability was detected in Tutorials-Website Employee Management System up to 611887d8f8375271ce8abc704507d46340837a60. Impacted is an unknown function of the file /admin/all-applied-leave.php of the component HTTP Request Handler. The manipulation results in improper authorization. The attack may be performed from remote. The exploit is now public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed.

In ATutor 2.2.4, an unauthenticated attacker can change the application settings and force it to use his crafted database, which allows him to gain access to the application. Next, he can change the directory that the application uploads files to, which allows him to achieve remote code execution. This occurs because install/include/header.php does not restrict certain changes (to db_host, db_login, db_password, and content_dir) within install/include/step5.php.

Adobe Commerce versions 2.4.3-p2 (and earlier), 2.3.7-p3 (and earlier) and 2.4.4 (and earlier) are affected by an Improper Authorization vulnerability that could result in Privilege escalation. An attacker could leverage this vulnerability to access other user's data. Exploitation of this issue does not require user interaction.

OpenID Connect Issuer in LemonLDAP::NG 2.x through 2.0.5 may allow an attacker to bypass access control rules via a crafted OpenID Connect authorization request. To be vulnerable, there must exist an OIDC Relaying party within the LemonLDAP configuration with weaker access control rules than the target RP, and no filtering on redirection URIs.

TCP Wrappers (tcp_wrappers) in FreeBSD 4.1.1 through 4.3 with the PARANOID ACL option enabled does not properly check the result of a reverse DNS lookup, which could allow remote attackers to bypass intended access restrictions via DNS spoofing.

An issue was discovered in slicer69 doas before 6.2 on certain platforms other than OpenBSD. On platforms without strtonum(3), sscanf was used without checking for error cases. Instead, the uninitialized variable errstr was checked and in some cases returned success even if sscanf failed. The result was that, instead of reporting that the supplied username or group name did not exist, it would execute the command as root.

A vulnerability was found in Fanli2012 native-php-cms 1.0 and classified as critical. This issue affects some unknown processing of the file /fladmin/sysconfig_doedit.php of the component Backend. The manipulation leads to improper authorization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Apache Shiro before 1.9.1, A RegexRequestMatcher can be misconfigured to be bypassed on some servlet containers. Applications using RegExPatternMatcher with `.` in the regular expression are possibly vulnerable to an authorization bypass.

Power Distribution Units running on Powertek firmware (multiple brands) before 3.30.30 allows remote authorization bypass in the web interface. To exploit the vulnerability, an attacker must send an HTTP packet to the data retrieval interface (/cgi/get_param.cgi) with the tmpToken cookie set to an empty string followed by a semicolon. This bypasses an active session authorization check. This can be then used to fetch the values of protected sys.passwd and sys.su.name fields that contain the username and password in cleartext.

On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by observing CPU registers and the effect of code/instruction execution.

In WebAccess, versions 8.4.1 and prior, an improper authorization vulnerability may allow an attacker to disclose sensitive information, cause improper control of generation of code, which may allow remote code execution or cause a system crash.

Apache CXF before 3.3.4 and 3.2.11 provides all of the components that are required to build a fully fledged OpenId Connect service. There is a vulnerability in the access token services, where it does not validate that the authenticated principal is equal to that of the supplied clientId parameter in the request. If a malicious client was able to somehow steal an authorization code issued to another client, then they could exploit this vulnerability to obtain an access token for the other client.

A vulnerability in the Remember Me function of Masa CMS v7.2, 7.3, and 7.4-beta allows attackers to bypass authentication via a crafted web request.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-acknerr-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

LDAP authentication in SAP HANA Database version 2.0 can be bypassed if the attached LDAP directory server is configured to enable unauthenticated bind.

The iframe sandbox rules were not correctly applied to XSLT stylesheets, allowing an iframe to bypass restrictions such as executing scripts or navigating the top-level frame. This vulnerability affects Firefox < 94, Thunderbird < 91.3, and Firefox ESR < 91.3.

Cacti is an open source platform which provides a robust and extensible operational monitoring and fault management framework for users. In affected versions a command injection vulnerability allows an unauthenticated user to execute arbitrary code on a server running Cacti, if a specific data source was selected for any monitored device. The vulnerability resides in the `remote_agent.php` file. This file can be accessed without authentication. This function retrieves the IP address of the client via `get_client_addr` and resolves this IP address to the corresponding hostname via `gethostbyaddr`. After this, it is verified that an entry within the `poller` table exists, where the hostname corresponds to the resolved hostname. If such an entry was found, the function returns `true` and the client is authorized. This authorization can be bypassed due to the implementation of the `get_client_addr` function. The function is defined in the file `lib/functions.php` and checks serval `$_SERVER` variables to determine the IP address of the client. The variables beginning with `HTTP_` can be arbitrarily set by an attacker. Since there is a default entry in the `poller` table with the hostname of the server running Cacti, an attacker can bypass the authentication e.g. by providing the header `Forwarded-For: <TARGETIP>`. This way the function `get_client_addr` returns the IP address of the server running Cacti. The following call to `gethostbyaddr` will resolve this IP address to the hostname of the server, which will pass the `poller` hostname check because of the default entry. After the authorization of the `remote_agent.php` file is bypassed, an attacker can trigger different actions. One of these actions is called `polldata`. The called function `poll_for_data` retrieves a few request parameters and loads the corresponding `poller_item` entries from the database. If the `action` of a `poller_item` equals `POLLER_ACTION_SCRIPT_PHP`, the function `proc_open` is used to execute a PHP script. The attacker-controlled parameter `$poller_id` is retrieved via the function `get_nfilter_request_var`, which allows arbitrary strings. This variable is later inserted into the string passed to `proc_open`, which leads to a command injection vulnerability. By e.g. providing the `poller_id=;id` the `id` command is executed. In order to reach the vulnerable call, the attacker must provide a `host_id` and `local_data_id`, where the `action` of the corresponding `poller_item` is set to `POLLER_ACTION_SCRIPT_PHP`. Both of these ids (`host_id` and `local_data_id`) can easily be bruteforced. The only requirement is that a `poller_item` with an `POLLER_ACTION_SCRIPT_PHP` action exists. This is very likely on a productive instance because this action is added by some predefined templates like `Device - Uptime` or `Device - Polling Time`. This command injection vulnerability allows an unauthenticated user to execute arbitrary commands if a `poller_item` with the `action` type `POLLER_ACTION_SCRIPT_PHP` (`2`) is configured. The authorization bypass should be prevented by not allowing an attacker to make `get_client_addr` (file `lib/functions.php`) return an arbitrary IP address. This could be done by not honoring the `HTTP_...` `$_SERVER` variables. If these should be kept for compatibility reasons it should at least be prevented to fake the IP address of the server running Cacti. This vulnerability has been addressed in both the 1.2.x and 1.3.x release branches with `1.2.23` being the first release containing the patch.

Improper authorization in Microsoft Partner Center allows an unauthorized attacker to elevate privileges over a network.

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow an unauthorized user to view device information, alter firmware content and device configuration. This vulnerability is the same as CNVD-2020-68651.

A vulnerability was found in SourceCodester Online Eyewear Shop 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /classes/Users.php?f=save of the component User Creation Handler. The manipulation of the argument Type with the input 1 leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-off" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

Implicit Intent hijacking vulnerability in Samsung Account prior to SMR Jun-2022 Release 1 allows attackers to bypass user confirmation of Samsung Account.

The management page of the Orca HCM digital learning platform does not perform identity verification, which allows remote attackers to execute the management function without logging in, access members’ information, modify and delete the courses in system, thus causing users fail to access the learning content.

A flaw was found in openstack-keystone. Only the first 72 characters of an application secret are verified allowing attackers bypass some password complexity which administrators may be counting on. The highest threat from this vulnerability is to data confidentiality and integrity.

Rockwell Automation FactoryTalk EnergyMetrix before 2.20.00 does not invalidate credentials upon a logout action, which makes it easier for remote attackers to obtain access by leveraging an unattended workstation.

HaloITSM versions up to 2.146.1 are affected by a SAML XML Signature Wrapping (XSW) vulnerability. When having a SAML integration configured, anonymous actors could impersonate arbitrary HaloITSM users by just knowing their email address. HaloITSM versions past 2.146.1 (and patches starting from 2.143.61 ) fix the mentioned vulnerability.

Depending on the configuration of the route permission table in file 'saprouttab', it is possible for an unauthenticated attacker to execute SAProuter administration commands in SAP NetWeaver and ABAP Platform - versions KERNEL 7.49, 7.77, 7.81, 7.85, 7.86, 7.87, 7.88, KRNL64NUC 7.49, KRNL64UC 7.49, SAP_ROUTER 7.53, 7.22, from a remote client, for example stopping the SAProuter, that could highly impact systems availability.

Nextcloud Server is a Nextcloud package that handles data storage. Nextcloud Server supports application specific tokens for authentication purposes. These tokens are supposed to be granted to a specific applications (e.g. DAV sync clients), and can also be configured by the user to not have any filesystem access. Due to a lacking permission check, the tokens were able to change their own permissions in versions prior to 19.0.13, 20.0.11, and 21.0.3. Thus fileystem limited tokens were able to grant themselves access to the filesystem. The issue is patched in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds aside from upgrading.