A post-authentication command injection vulnerability in the "ZyEE" function of the Zyxel EX5601-T1 firmware version V5.70(ACDZ.3.6)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

A vulnerability has been discovered in Privileged Remote Access (PRA) and Remote Support (RS) which can allow an attacker with existing administrative privileges to inject commands and run as a site user.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

Command injection in Ivanti Connect Secure before version 22.7R2.1 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1.1 (Not Applicable to 9.1Rx) allows a remote authenticated attacker with admin privileges to achieve remote code execution.

A post-authentication command injection vulnerability in the "DNSServer” parameter of the diagnostic function in the Zyxel VMG8825-T50K firmware version V5.50(ABOM.8.5)C0 and earlier could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

A command injection vulnerability was reported in the Integrated Management Module (IMM) of legacy IBM System x 3550 M3 and IBM System x 3650 M3 servers that could allow the execution of operating system commands over an authenticated SSH or Telnet session.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

NVIDIA DGX-1 BMC contains a vulnerability in the SPX REST API, where an attacker with the appropriate level of authorization can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, and data tampering.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through the specific web page.

Dell VNX2 OE for File versions 8.1.21.266 and earlier, contain an authenticated remote code execution vulnerability. A remote malicious user with privileges may exploit this vulnerability to execute commands on the system.

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.

An improper neutralization of special elements used in an OS Command ("OS Command Injection") vulnerability [CWE-78] in Fortinet FortiADC version 7.2.0 and before 7.1.1 allows a remote and authenticated attacker with low privilege to execute unauthorized code via specifically crafted HTTP parameters.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

Dell EMC CloudLink 7.1 and all prior versions contain an OS command injection Vulnerability. A remote high privileged attacker, may potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker. This vulnerability is considered critical as it may be leveraged to completely compromise the vulnerable application as well as the underlying operating system. Dell recommends customers to upgrade at the earliest opportunity.

IDExpert from CHANGING Information Technology does not properly validate a specific parameter in the administrator interface, allowing remote attackers with administrative privileges to inject and execute OS commands on the server.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

ASUS routers supporting custom OpenVPN profiles are vulnerable to a code execution vulnerability. An authenticated and remote attacker can execute arbitrary operating system commands by uploading a crafted OVPN profile. Known affected routers include ASUS ExpertWiFi, ASUS RT-AX55, ASUS RT-AX58U, ASUS RT-AC67U, ASUS RT-AC68R, ASUS RT-AC68U, ASUS RT-AX86, ASUS RT-AC86U, ASUS RT-AX88U, and ASUS RT-AX3000.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an XML Injection vulnerability in the Widgets Update Layout. An attacker with admin privileges can trigger a specially crafted script to achieve remote code execution.

A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an XML Injection vulnerability in the Widgets Update Layout. An attacker with admin privileges can trigger a specially crafted script to achieve remote code execution.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

A command injection vulnerability exists where an authenticated, remote attacker with administrator privileges on the Security Center application could modify Logging parameters, which could lead to the execution of arbitrary code on the Security Center host.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A command injection vulnerability exists in the processAnalyticsReport method from the com.webos.service.cloudupload service on webOS version 5 through 7. A series of specially crafted requests can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability. Full versions and TV models affected: * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB  * webOS 7.3.1-43 (mullet-mebin) - 03.33.85 running on OLED55A23LA

The Backup Migration plugin for WordPress is vulnerable to OS Command Injection in all versions up to, and including, 1.3.9 via the 'url' parameter. This vulnerability allows authenticated attackers, with administrator-level permissions and above, to execute arbitrary commands on the host operating system.

A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.

The files_antivirus component before 1.0.0 for ownCloud allows OS Command Injection via the administration settings.

A post-authentication command injection vulnerability in the file upload binary in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1, USG FLEX H series firmware versions from 1.10 through 1.10 Patch 1, NWA50AX firmware versions through 6.29(ABYW.3), WAC500 firmware versions through 6.65(ABVS.1), WAX300H firmware versions through 6.60(ACHF.1), and WBE660S firmware versions through 6.65(ACGG.1) could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device via FTP.

A command injection vulnerability exists in the getAudioMetadata method from the com.webos.service.attachedstoragemanager service on webOS version 4 through 7. A series of specially crafted requests can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability. * webOS 4.9.7 - 5.30.40 running on LG43UM7000PLA  * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA  * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB  * webOS 7.3.1-43 (mullet-mebin) - 03.33.85 running on OLED55A23LA

A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The post-authentication command injection vulnerability in Zyxel NAS326 firmware versions through V5.21(AAZF.15)C0 and NAS542 firmware versions through V5.21(ABAG.12)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands by sending a crafted query parameter attached to the URL of an affected device’s web management interface.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.10.0, 6.9.6 and 6.8.9. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new users. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

An issue was discovered in CommScope Ruckus Unleashed prior to 200.15.6.212.14 and 200.17.7.0.139, and in Ruckus ZoneDirector prior to 10.5.1.0.279, where a hidden debug script `.ap_debug.sh` invoked from the restricted CLI does not properly sanitize its input, allowing an authenticated attacker to execute arbitrary commands as root on the controller or specified target.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.64 and WNDR3700v5 before 1.1.0.54.

A command injection vulnerability has been reported to affect QNAP device running Media Streaming add-on. If exploited, this vulnerability allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of Media Streaming add-on: QTS 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.5.4: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.3.6: Media Streaming add-on 430.1.8.12 ( 2021/08/20 ) and later QTS 4.3.3: Media Streaming add-on 430.1.8.12 ( 2021/09/29 ) and later QuTS-Hero 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later

Three os command injection vulnerabilities exist in the boa formWsc functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `localPin` request's parameter.

badmonkey, a Security Researcher has found a flaw that allows for a authenticated command injection on the camera. An attacker could inject malicious into request packets to execute command. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds.

ColdFusion versions 2025.1, 2023.13, 2021.19 and earlier are affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could result in arbitrary code execution in the context of the current user. A high-privileged attacker could leverage this vulnerability to bypass security mechanisms and execute code. Exploitation of this issue does not require user interaction and scope is changed.